Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 26

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  interharmonics
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
EN
The presented study examines the effect of voltage subharmonics, which relates to components of the frequency less than the fundamental voltage harmonic, and the currents and vibration of the line start permanent magnet synchronous motor. The obtained experimental results corresponded to a production motor with a rated power of 3 kW and a rated speed of 1500 rpm. The main purpose of our study was to highlight that the subharmonic value had a non-linear effect on the vibration level of the considered motor. It was found that for subharmonic values up to approx. 0.5% of the vibration level could be considered acceptable for long-term operation, whereas vibration caused by voltage subharmonics of values greater than approx. 0.8% might promote machine damage.
EN
A specific case of voltage fluctuations is sinusoidal voltage modulation, which is a superposition of the fundamental voltage component and the subharmonic and interharmonic components – that is components of frequency less than the fundamental one or not being an integer multiple of it. Depending on the phase angles of the subharmonic and interharmonic components, various cases of voltage modulation can be distinguished, like amplitude, phase and intermediate modulations. This paper deals with the effect of phase angles of the subharmonic and interharmonic components on speed variation. The results of FEM computations are presented for a cage induction motor with a rated power of 3 kW.
3
EN
Some of the most common power quality disturbances are voltage fluctuations. They are interconnected with the presence of voltage subharmonics and interharmonics. Voltage fluctuations, subharmonics and interharmonics exert a negative effect on various elements of a power system, including cage induction motors. This work is devoted to the impact of voltage fluctuations on the current of a one-phase induction motor. The results of empirical investigations are presented for sinusoidal amplitude modulations of various frequencies and are compared with the effects of voltage subharmonics occurring as a single power quality disturbance.
EN
In very low power drives, a single-phase induction motor is used. This motor, like the 3-phase induction squirrel-cage motor, requires a voltage supply with suitable parameters – of suitable quality, in practice. In energy systems, voltage quality distortions may occur in connection with the deviation of the RMS voltage and the occurrence of harmonics, subharmonics and interharmonics in its waveforms. Subharmonics and interharmonics in the voltage waveforms are particularly detrimental to induction motors. They cause, for example, additional power losses, electromagnetic torque pulsation and motor vibrations. It should be stressed that the existing publications on the impact of the considered distortions on the induction squirrel-cage motor are almost only applicable to 3-phase machines. The article presents the results of research on the influence of subharmonic and interharmonic voltage components on the single-phase induction squirrel-cage motor.
EN
The paper provides substantiation for the idea that interharmonics, though still insufficiently studied in power engineering, are an important element of the complex notion of electromagnetic compatibility of power supply systems. The purpose is to systematize mathematical apparatus for the analysis of interharmonics amplitude-frequency spectrum. Special attention is paid to practical calculations of interharmonics in respect to staple sources of electromagnetic interferences – frequency converters of different types. Certain elements of spectral analysis theory are presented as an efficient tool for the analysis of interharmonics’ levels. The paper analyzes the influence of higher harmonics and interharmonics on the elements of the power supply system at an industrial enterprise, taking into account peculiarities of the construction of external and internal power supply schemes. Typical graphs of electrical loads of the main technological installations are plotted to seek for an individual "trace" in the spectrum of higher harmonic components. The authors present the results of the bench experimental research into the influence of the output frequency of energy converters and the motor shaft torque on the values of higher harmonics and interharmonics. The voltage quality criterion affects the reliability index in the projected transition to decentralized principle of power systems construction and justification of physical mechanisms ensuring rational reliability indicators at low voltage quality. On the basis of the developed dependences, a specified technique is proposed to study electric power losses considering individual schedules of higher harmonics and remoteness of electromagnetic noise source. Recommendations are worked out for the implementation of energy-efficient modes of the enterprise operation, which can be realized by comprehensive consideration of reliability, quality of power supply and optimal flow of reactive power. Recommendations are also provided for the selection of compensating devices based on the number and power of converters.
EN
This paper deals with the effect of voltage subharmonics on power losses and heating of an induction motor. An increase in power losses in stator and rotor windings and their impact on windings temperature is presented for subharmonics of various frequencies. The results of this study’s investigations are provided for subharmonics occurring as a single power quality disturbance and combined with voltage deviation. The appropriate electromagnetic computations were performed with the finite element method, and thermal ones – with an analytical method.
7
PL
W artykule rozważono aktualny problem kompensacji mocy biernej w sieciach elektrycznych z nieliniowymi szybkozmiennymi obciążeniami, takimi jak elektryczne piece łukowe, napędy walcownicze, itp. Właściwością pracy tego rodzaju obciążeń jest wprowadzanie do sieci zasilającej interharmonicznych prądu (wraz z wyższymi harmonicznymi) i stosunkowo niski współczynnik mocy. W związku z tym istnieje potrzeba oceny doboru mocy urządzeń kompensujących z uwzględnieniem losowego charakteru odkształcenia przebiegów prądu i napięcia, a w szczególności składowych interharmonicznych, których wpływ jak dotychczas nie został w pełni zbadany.
EN
The paper discusses the current problem of reactive power compensation in electric networks with non-linear fast-changing loads, such as electric arc furnaces, rolling machines, etc. Operation of this kind of loads causes that interharmonic currents (together with higher harmonics) are injected into the supply network and a relatively low power factor. Therefore, there is a need to evaluate the power selection of compensating devices, taking into account the random nature of distortion of current and voltage waveforms, in particular interharmonic components whose impact has not been fully investigated so far.
PL
W artykule omówiony został wpływ przebiegów odkształconych na dokładność pomiaru mocy w masowo instalowanych przez dystrybutorów systemu energetycznego statycznych licznikach energii elektrycznej. Przedstawiono podstawowe aspekty metrologiczne oraz niezawodnościowe dotyczące rzeczywistego pomiaru energii. Omawiana zagadnienia przedstawiono w oparciu o analizę dwóch przypadków: przebiegi odkształcone ze składową podstawową i zawartością wyższych harmonicznych oraz przebiegi odkształcone z zawartością subharmonicznych i interharmonicznych.
EN
The article discusses the influence of deformed waveforms on the accuracy of power measurement in the energy meters installed by the distributors of the power system. The basic sub-logical and reliability aspects of the real energy measure are presented. The discussed issue is presented based on the analysis of two cases: deformed waveforms with a fundamental component and higher harmonic content and distorted waveforms with subharmonic and interharmonic contents.
EN
The paper discusses the measurement and analysis of the voltage and output power distortions of frequency inverter that supplies an induction motor. It covers basic information regarding frequency inverters and norms with definitions and descriptions of terms related to the measurement of harmonics and interharmonics. Moreover, it describes the problems that can occur while analyzing the signal when the inter-harmonics are present during the measurement. Exemplary results of measurements done with power quality analyzer in the laboratory have been presented.
EN
The paper discusses the measurement and analysis of the voltage and output power distortions of frequency inverter that supplies an induction motor. It covers basic information regarding frequency inverters and norms with definitions and descriptions of terms related to the measurement of harmonics and interharmonics. Moreover, it describes the problems that can occur while analyzing the signal when the inter-harmonics are present during the measurement. Exemplary results of measurements done with power quality analyzer in the laboratory have been presented.
PL
Artykuł dotyczy prądów w uzwojeniach stojana silnika indukcyjnego zasilanego napięciem zawierającym subharmoniczne o kolejności przeciwnej. Dokonano analizy widma prądu pobieranego przez silnik oraz amplitudy subharmonicznych prądu. Przedyskutowano różnice dotyczące odpowiedzi prądowej silnika na subharmoniczne napięcia o kolejności przeciwnej i zgodnej. Wyniki badań eksperymentalnych przedstawiono dla silnika indukcyjnego klatkowego o mocy 3 kW i różnych częstotliwości subharmonicznych napięcia.
EN
This paper deals with current consumed by an induction cage machine supplied with voltage containing negative-sequence subharmonic injection. The spectrum of the motor supply current and amplitude of current subharmonics are analysed. The differences in the effect of negative-sequence voltage subharmonic and positive-sequence ones are discussed. The results of experimental investigations are presented for various subharmonic frequency and an induction cage machine of the rated power of 3 kW.
PL
Artykuł dotyczy jednoczesnego oddziaływania subharmonicznych napięcia i odchylenia napięcia na obciążenia cieplne silnika indukcyjnego. Dokonano analizy wpływu rozważanych zaburzeń jakości napięcia zasilania na temperaturę uzwojeń oraz szacunkowy czas życia silnika. Przedstawiono wyniki symulacji komputerowych dla silnika indukcyjnego klatkowego budowy zamkniętej o mocy 5,5 kW.
EN
This paper concerns the effect of simultaneous presence of voltage subharmonics and voltage deviation on thermal loads of an induction cage machine. The influence of the considered power quality disturbances on windings temperature rise is analyzed. The operational life expectancy of a machine is discussed as well. The results of computer simulation are presented for a totally enclosed induction cage machine of the rated power 5.5 kW.
PL
Artykuł dotyczy wpływu subharmonicznych napięcia na prądy uzwojeń stojana i prędkość obrotową silnika indukcyjnego klatkowego. Badania wstępne wykonano za pomocą modelu 2D zaimplementowanego w środowisku Ansoft Maxwell. Wyniki obliczeń przedstawiono dla silnika indukcyjnego o mocy 3 kW, połączonego w trójkąt.
EN
This paper deals with the effect of voltage subharmononics on stator windings currents and rotational speed of an induction cage machine. The preliminary investigations were carried out with 2D machine model implemented in Ansoft Maxwell environment. The results of calculation are presented for a delta-connected machine of the rated power 3 kW.
14
Content available remote Conductance control of a shunt active power filter and active energy buffer
EN
There are many types of control method for shunt active power filter (SAPF) investigated up until now. The authors describe complex methods of determining active filter reference currents or powers. This paper is dedicated to a simple, but universally used control algorithm based on the load equivalent conductance approach. This method allows for non-active current compensation, energy buffering, and energy redistribution among loads under compensation. It is also useful for voltage-source as current-source inverter based active filters, and for DC system as well as for AC single or three-phase filters.
PL
Zadaniem energoelektronicznego filtru aktywnego jest kompensacja prądu nieaktywnego w gałęzi źródła zasilania. Znanych jest wiele metod pozyskiwania informacji niezbędnych do skompensowania tego prądu. Często są to wyrafinowane metody, bardzo złożone zarówno pod względem pojęciowym, jak i obliczeniowym. W niniejszym artykule przedstawiono nieskomplikowaną, lecz wydajną i wielofunkcyjną metodę uzyskiwania wzorca składowej czynnej prądu obciążenia. Jest ona oparta na pojęciu konduktancji zastępczej obciążenia. Umożliwia nie tylko kompensację prądu nieaktywnego, ale również sterowanie przepływem energii czynnej, w tym jej rekuperację i redystrybucję do kompensowanych obciążeń. Opisana metoda może być stosowana w obwodach jedno- i wielofazowych, a także w obwodach zasilanych sygnałem stałym. Może też zostać użyta wobec filtru aktywnego opartego i na falowniku napięcia, i na falowniku prądu.
PL
Przedstawiono wybrane zagadnienia z zakresu kompatybilności elektromagnetycznej urządzeń systemów telekomunikacyjnych mogących pracować w białych przestrzeniach. Zwrócono uwagę na potencjalne sygnały niepożądane, mogące zakłócać prawidłowy odbiór sygnałów innych systemów, np. odbiór telewizji cyfrowej DVB-T Wskazano znaczenie spełnienia wymagań norm, w tym nowej normy ETSI EN 301 598 v1.0.9. Wskazano przykładowe problemy, na które powinni zwracać uwagę producenci WSD.
EN
The paper presents selected issues in the field of electromagnetic compatibility of telecommunications systems that can operate in white spaces. Sharing the television band with other sources of electromagnetic radiation can generate undesirable phenomena that interfere with the desired DVB-T signal. The new ETSI EN 301 598 standard imposes some additional restrictions. It has been demonstrated through the implementation of the tests proposed by the standard that there are serious problems associated with the generation of harmonics and interharmonics appearing in properly working DVB-T devices. These phenomena should be taken into account especially by the manufacturers of white space devices (WSD) working in TV band, but also by the institutions supervising the electromagnetic spectrum.
EN
Engineering methods of evaluation of additional power losses in electric power networks at non-sinusoidal conditions were proposed in the paper, by the known value of total harmonic distortions (THD). In exploitation practice such coefficient can be both measured and calculated in specific grid nodes of the power supply systems. The peculiarity of the method proposed is an obligatory of considering interharmonics in the presence of the corresponding sources.
PL
W artykule zaproponowano metodę techniczną oceny dodatkowych strat energii w sieciach elektroenergetycznych na podstawie znanej wartości całkowitego współczynnika odkształcenia napięcia harmonicznymi (THD). W praktyce eksploatacyjnej wartości tych współczynników mogą być mierzone lub obliczane w poszczególnych węzłach systemów zasilania. Szczególną własnością proponowanej metody jest koniczność uwzględniania obecności źródeł interharmonicznych.
17
Content available remote Diagnostyka silników asynchronicznych pierścieniowych napędu młyna cementu
PL
W artykule przedstawiono wybrane zagadnienia diagnostyki napędu młyna cementu z dwoma silnikami asynchronicznymi pierścieniowymi zasilanymi z sieci przemysłowej 6 kV. Badane silniki wyposażone są w rozruszniki wodne i napędzają za pośrednictwem przekładni wieńcowej bęben młyna cementu. Na podstawie przebiegów napięciowo-prądowych zarejestrowanych w trakcie rozruchu i w stanie obciążenia wyznaczono wartości charakterystycznych wskaźników wykorzystanych w procesie diagnostyki układu napędowego. Stwierdzono zwiększoną asymetrię prądową jednego z silników. W analizie wykorzystano tzw. Sygnał "ruchomy" dokonując jego analizy częstotliwościowej w zakresie występowania inter-harmonicznych w widmie modułu wektora przestrzennego prądu |Iαβ|. Przedstawiono wyniki badań w postaci zmierzonych oraz wyliczonych charakterystyk i parametrów badanego zespołu napędowego. W końcowej części artykułu zamieszczono podsumowanie i wnioski końcowe.
EN
The paper deals with selected problems of diagnostics of a cement mill drive with two asynchronous slip-ring motors supplied from an industrial 6 kV power network. The motors are equipped with water starters and drive the mill barrel through a rim gear. The values of characteristic indices used for the system diagnostics were evaluated on the basis of voltage-current waveforms recorded during the startup and under load. It was found that one of the motors had increased current asymmetry. The analysis was carried out Rusing so called “moving” signal and its spectral analysis paying special attention to occurrence of inter-harmonics In the spectrum of absolute value |Iαβ| of the spatial current vector. The results are presented in the form of measured and evaluated characteristics and parameters of the considered drive unit. The summary and conclusions are included at the end of the paper.
EN
This paper presents a new modification of the least squares Prony's method for power quality analysis in terms of estimation of harmonics and interharmonics in an electric power signal.
PL
Wychodząc ze wzoru definicyjnego mocy czynnej odbiorników energii elektrycznej, w których występują nie tylko harmoniczne prądu i napięcia ale również ich subharmoniczne i interharmoniczne, wskazano jak dobór szerokości okna pomiarowego przy uśrednianiu w czasie wpływa na dokładność pomiaru tej mocy. W wyniku badań symulacyjnych uzyskano, że dobór czasu uśredniania równy 10. krotnemu okresowi częstotliwości podstawowej jest kompromisem zapewniającym dokładność 2,5% przy założeniu, że zniekształcenia w prądzie i napięciu nie przekraczają wartości określonych normami.
EN
Starting from the formula of the active definitional power, where there are not only the harmonics of current and voltage but also their subharmonics and interharmonics, it is identified as the choice of measuring window width for averaging in time affect the accuracy of active power measurement. As a result of simulation tests, it was obtained that the selection of averaging time equal to the 10th times, the period of the fundamental frequency is a compromise that guarantee accuracy of 1%, assuming that the distortion in the current and voltage do not exceed values permissible by standards.
20
EN
Paper presents the analysis of the IEC flickermeter’s signal chain operation for the input voltage consisting of three components: one of fundamental frequency and two sub/interharmonics. A model of an IEC flickermeter has been built consisting of a set of equations describing the dependency of Pst indicator from the amplitude and phase of one of the sub/interharmonics. The flicker occurrence for the case of sub/interharmonics presence was explained (even for frequenciesmuch greater than the power frequency). There have been assigned the sub/interharmonics’ frequencies for which the phase dependencies have to be taken into account while estimating the Pst indicator. The influence of simultaneous presence of both harmonic and sub/interharmonic components on the result of Pst indicator measure has also been described. The comparison with the results of the numerical simulations proved the described analysis of the IEC flickermeter’s signal chain is right.
PL
W pracy przedstawiono analizę działania toru sygnałowego miernika migotania światła (potocznie nazywanego flickermetrem) dla napięcia wejściowego składającego się z trzech składników: o częstotliwości podstawowej oraz dwóch interharmonicznych. Zbudowano model flickermetru składający się z zestawu równań opisujących zależność wskaźnika Pst od amplitudy i fazy jednej z interharmonicznych. Wyznaczono częstotliwości interharmonicznych dla których niezbędne jest uwzględnienie zależności fazowych przy wyznaczaniu wskaźnika Pst. Modyfikując opis toru sygnałowego dla dwóch interharmonicznych opisano wpływ jednoczesnego występowania składników harmonicznego i interharmonicznego na wynik pomiaru wskaźnika Pst. Na podstawie porównania z wynikami symulacji numerycznych stwierdzono prawidłowość przedstawionej analizy toru sygnałowego flickermetru.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.