During the geological prospecting works conducted in 2013 on Bangka Island (Indonesia), high monazite content was identified in the wastes produced during processing of cassiterite deposits. Monazite, among 250 known minerals containing REE, is one of the most important minerals as primary source of REE. The monazite content in this waste is up to 90.60%. The phase composition of the investigated tailing proves that the sources of minerals accompanying the placer sediments tin mineralization are granitoids. The tailing is composed of numerous ore minerals, including monazite, xenotime, zircon, cassiterite, malayaite, struverite, aeschynite-(Y), ilmenite, rutile, pseudorutile and anatase. Monazite grains belong to the group of cerium monazite. Its grains are characterized by high content of Ce2O3 27.12–33.50 w t.%, La2O3 up to 15.46 w t.%, Nd2O3 up to 12.87%. The total REE2O3 + Y content ranges from 58.18 to 65.90 wt.%. Monazite grains observations (SEM-BSE) revealed the presence of porous zones filled with fine phases of minerals with U and Th content. The radiation intensity of 232Th is ATh = 340 ± 10 Bq and 238AU = 114 ± 2 Bq. High content of monazite and other REE minerals indicates that tailing is a very rich, potential source of REEs, although the presence of radioactive elements at the moment is a technological obstacle in their processing and use. The utilization of monazite bearing waste in the Indonesian Islands can be an important factor for development and economic activation of this region and an example of the good practice of circular economy rules.
PL
W trakcie geologicznych prac prospekcyjnych prowadzonych w 2013 roku na indonezyjskiej wyspie Bangka stwierdzono wysokie zawartości monacytu w odpadach powstałych po przeróbce osadów kasyterytonośnych. Monacyt jest jednym z najważniejszych pierwotnych źródeł REE wśród 250 znanych minerałów zawierających REE. Zawartość monacytu w badanym odpadzie wynosi do 90,60%. Skład fazowy badanych odpadów wskazuje, że źródłem minerałów towarzyszących w cynonośnych złożach okruchowych były granitoidy. W składzie odpadu przeróbczego, metodą XRD zidentyfikowano obecność licznych minerałów złożowych, wśród nich: monacyt, ksenotym, cyrkon, kasyteryt, malayait, strüveryt, aeschynit-(Y), ilmenit, rutyl, pseudorutyl i anataz. Badania składu chemicznego ziaren monacytu z użyciem EPMA ujawniły, że należy on do grupy monacytu cerowego. Jego ziarna cechują się wysoką zawartością Ce2O3 27,12–33,50% wt., La2O3 do 15,46% wt., Nd2O3 do 12,87%. Całkowita zawartość REE2O3 + Y mieści się w zakresie od 58,18 do 65,90% wt. Obserwacje ziaren monacytu (BSE) ujawniły w nich obecność stref porowatych wypełnionych drobnymi fazami minerałów z udziałem U oraz Th. Aktywność promieniotwórcza 232Th wynosi ATh = 340 ± 10 Bq, a 238U = 114 ± 2 Bq. Wysoka zawartość monacytu oraz innych minerałów nośników REE wskazuje, że odpad przeróbczy stanowi bardzo bogate, potencjalne źródło pierwiastków ziem rzadkich, choć zawartość pierwiastków promieniotwórczych stanowi obecnie przeszkodę technologiczną w ich przetwarzaniu i wykorzystaniu. Wykorzystanie monacytonośnych odpadów z wysp Indonezji może być ważnym czynnikiem rozwoju i aktywizacji gospodarczej tego regionu oraz przykładem dobrej praktyki stosowania zasad gospodarki o obiegu zamkniętym.
The worldwide consumption of wollastonite has been increasing from day to day. It is a calcium metasilicate with the chemical formula CaSiO3. Wollastonite is the only naturally occurring, nonmetallic, white mineral that is needle-shaped in a crystal habit. Due to its high chemical and thermal resistance and nontoxic properties, wollastonite replaces asbestos. Apart from this, the acicular property of wollastonite allow it to compete with other acicular materials where improvements in dimensional stability, flexural modulus and heat deflection are sought. Due to its unique properties such as: its high brightness and whiteness, low moisture and oil absorption, low volatile content, and acicular properties, it is used also as a filling material for ceramics, plastics and paints, thermal and electrical insulator, wetting agent and smelter for glaze. Three methods are used for the beneficiation of wollastonite: mechanical sorting, dry or wet magnetic separation and flotation. Magnetic separation and flotation can be applied together in some cases. In this study, flotation has been investigated for the selective separation of calcite-rich wollastonite ores from the Buzlukdağ deposit, in the Kırşehir-Akpınar region, in the middle of Anatolia. The mineralogical analysis of the sample used in the study shows that the ore sample contains 60–62% wollastonite (CaSiO3), 4–5% augite (Ca,Na)(Mg,Fe,Al)(Si,Al)2O6, 30–32% calcite (CaCO3) and minor amount of other minerals. As a result of this study, the wollastonite concentrate which contains 0.44% Fe2O3, 52.71% SiO2, 87.85% wollastonite with 0.60% loss on ignition (using 1500 g/t potassium oleate) was obtained. The ultimate grade concentrates of calcite that can also be obtained as by-products are with 99.80% calcite content and 85.4% recovery.
PL
Światowe zużycie wollastonitu ciągle wzrasta. Wollastonit jest metakrzemianem wapnia o wzorze chemicznym CaSiO3. Jest jedynym naturalnie występującym, niemetalicznym, białym minerałem, który ma kształt igieł o pokroju kryształu. Wollastonit ze względu na wysoką odporność chemiczną i termiczną oraz właściwości nietoksyczne zastępuje azbest. Poza tym igiełkowa właściwość wollastonitu umożliwia konkurencję z innymi igiełkowymi materiałami, w zakresie poprawy stabilności wymiarowej, modułu zginania i ugięcia pod wpływem ciepła. Ze względu na swoje unikalne właściwości, takie jak: wysoka jasność i biel, niska wilgotność i absorpcja oleju, niska zawartość części lotnych i właściwości igiełkowe, umożliwia zastosowanie jego jako: materiału wypełniającego do ceramiki, tworzyw sztucznych i farb, izolatora termicznego i elektrycznego, środka zwilżającego i pieca do glazury. Do wzbogacania wollastonitu stosowane są trzy metody: sortowanie mechaniczne, separacja magnetyczna na sucho lub mokro oraz flotacja. W niektórych przypadkach można zastosować zarówno separację magnetyczną, jak i flotację. W tym artykule zastosowano flotację w celu selektywnego oddzielania rud kalcytu i wollastonitu ze złoża Buzlukdağ w regionie Kırşehir-Akpınar w centrum Anatolii. Analiza mineralogiczna próbki użytej w badaniu pokazuje, że próba rudy zawiera 60–62% wollastonitu (CaSiO3), 4–5% augitu (Ca, Na)(Mg, Fe, Al)(Si, Al)2O6, 30–32% kalcytu (CaCO3) i niewielką ilość innych minerałów. W wyniku tych badań uzyskano koncentrat wollastonitu, który zawiera 0,44% ‒ Fe2O3, 52,71% ‒ SiO2, 87,85% wolastonitu przy stratach wynoszących 0,60% (przy użyciu 1500 g/Mg oleinianu potasu). Końcowe koncentraty kalcytu, które można również otrzymać jako produkty uboczne, zawierają 99,80% kalcytu i 85,4% odzysku.
3
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Perlite is an important industrial mineral with unique properties. It is an acid volcanic glass (rhyolitic or rhyodacitic) with a water content between 1 to 5%. The largest industrial use is in the form of expanded pearlite. This produced by rapidly heated, grinded natural perlite at 600–900°C (Barker & Santini 2006). Perlite occurrences represent economic accumulation in Slovakia. Perlite is mined at the Lehôtka pod Brehmi deposit for a long time and now is starting to open Jastrabá deposit. The aim of this paper is characterization and correlation of samples of both deposits and samples from locality Szabova skala due to their different genesis. The perlite from Lehôtka pod Brehmi deposit has been characterized by X-ray powder diffraction, IR spectroscopy and thermal analysis in the current research (Uhlík et al. 2014). Any significant differences were not identified in the content of volcanic glass, crystalline phases, or content of water. Only one differences have been observed in the macroscopically different perlite glasses (color, texture) – porosity. The macroscopically (color, texture) of different perlite glasses differences were once in porosity. The purpose of this article is to characterize the perlite sample by optical microscopy, X-ray powder diffraction and microprobe analysis. The characterization of perlitic glass is important not only for the mining company because of heterogeneity of Lehôtka pod Brehmi deposit, but also from a scientific point of view and about 30-years gap of perlite studies in the Central Slovakian Volcanic Field (Capková 1976, Kraus et al. 1980, 1985, Zuberec et al. 1980, 1983).
4
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Celem pracy było zbadanie wpływu atomów domieszek, obecnych w minerałach przemysłowych, na wyniki rentgenowskiej ilościowej analizy fazowej. Wykonano prace doświadczalne, mające na celu otrzymanie roztworów stałych składników fazy krzemianowej w spiekach żelaza. Zastosowano metodę Rietvelda do symulacji dyfraktogramów mieszanin dwuskładnikowych zawierających fajalit (CaxFe1-x)2SiO4 o różnym stopniu podstawienia jonami wapnia, x = 0,0; 0,15; 0,30; 0,40; 0,50; 0,60. W wyniku stwierdzono, że nieuwzględnienie w obliczeniach ilościowych obecności roztworu stałego, prowadzi do błędu nie większego niż 2% wartości rzeczywistej udziału fazy oliwinowej.
EN
The purpose of the work was to examine the effect of admixture atoms present in industrial minerals on the results of X-ray quantitative phase analysis. The experimental works to obtain solid solutions of siliceous phase components in iron sinters were carried out. The Rietveld method was used for simulation of diffractograms of two-component mixtures containing fayalite (CaxFe1-x)2SiO4 with different degrees of substitution for calcium ions, x = 0.0; 0.15; 0.30; 0.40; 0.50; 0.60. As a consequence, it was found that failure to consider the presence of solid solution in quantitative calculations resulted in error no higher than 2% of the real value of olivine phase share.
Clays and zeolites are some of the most important industrial minerals. They have practical applications in geology, agriculture, construction, engineering, process industries, and environment. This article is about one of them: radioactive waste disposal. We were investigating characteristics of bentonite clay and clinoptilolite in case of Cs(I), Th(IV), U(VI) sorption.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.