Ograniczanie wyników
Czasopisma help
Autorzy help
Lata help
Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 904

Liczba wyników na stronie
first rewind previous Strona / 46 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  energy
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 46 next fast forward last
EN
In this paper, by introducing two statistical parameters, energy and L-kurtosis, a new fault diagnostic system combining Wavelet Packet Decomposition and Multilayer Perceptron Neural Network is designed to improve efficiency and precision of induction motor defects diagnosis. This method is applied to vibratory signals of asynchronous motor running at two different rotational speeds (1500 rpm and 2000 rpm) at a sampling frequency of 8 KHz to detect three main types of defects: bearing faults, load imbalance and misalignment. These speeds are considered as the usual medium running speeds of induction motor. According to the results, the high performance and accuracy of this new faults diagnostic system is proved and confirmed, thus it can be used in the detection of other machines defects.
EN
The constant increase in energy demand and the need to reduce the carbon footprint on the environment has put countries in a race against time, looking for alternative resources or ways to supply this need. One of the main resources is solar radiation, which can be used to generate energy, initially on a small scale, but in recent years has been directed towards supplying large cities. The economic, political, and social investment must respond to planning and expansion criteria in order to generate feasible proposals. Through simulation of a real electrical system, the voltage instability was determined, which was corrected at software level by entering a photovoltaic solar plant, being this dimensioned from the PV curve obtained. Finally, the optimal location for the development of a solar photovoltaic plant among four possible scenarios was obtained through the application of an optimization algorithm. This approach was converted into an alternative applicable to different geographical locations.
PL
W artykule dokonano przeglądu światowe literatury w zakresie ochrony własności intelektualne w sektorze energetycznym w kontekście transformacji energetyczne. Na przykładzie spółek energetycznych notowanych na GPW w Warszawie ukazano jak zmieniała się liczba zgłoszeń patentowych na przestrzeni ostatnich dwóch dekad. Podjęto również próbę oszacowania korelacji między ilością zgłoszeń patentowych a wartością rynkową spółek energetycznych.
EN
The article reviews the global literature on intellectual property protection in the energy sector in the context of the energy transformation. An evidence of energy companies listed on the Warsaw Stock Exchange was applied to show how the number of patent applications has changed over the past two decades. An attempt was also made to estimate the correlation between the number of patent applications and the market value of listed energy companies.
EN
The aim of the article is to identify and analyze how to manage the energy supply chain as part of public-private partnership and to try to answer the question in what direction should the Polish industry go to compete on global markets in the face of many challenges of decarbonisation? Maybe by using green energy produced close to its recipients and supplied bypassing the transmission grid? Maybe through the diversification of installations processing energy from various sources (RES), which would constitute an additional regulatory value for the power system? Could solutions, e.g. based on a direct line system, help in such a difficult technological and regulatory time for the energy market? As a research problem, an attempt was made to answer the question to what extent, for example, a systemic approach based on the model of direct lines can help strategic industry organizations in managing the energy supply chain, especially in situations of energy crisis? What actions can be taken to keep a secure energy supply chain management system operational or how to deal with threats affecting the functioning of the energy supply chain? The essence is to emphasize the role of the energy supply chain management system, based on specific requirements or innovative solutions, e.g. a sharing system or direct lines, in maintaining an appropriate level of energy supply security, especially during an energy crisis. To what extent can the requirements of reference documents focusing on operational control and process control ensure the security of the energy supply chain? With regard to the research problems defined in this way, the working hypothesis was formulated as follows: Searching for innovative solutions in the energy sector, and in particular the implementation of direct systems, can effectively counteract or at least reduce the effects of the recent electricity crisis and increase economic attractiveness for the industry. The article uses theoretical and empirical research methods adapted to the problems posed and the purpose of the article. These include: analysis of the literature, normative and legal documents and internal system documentation of sample organizations, the audit method using direct interview and observation of processes and activities.
EN
In Poland, the share of road transport carried out by micro and small enterprises in total transport remains at a very high level. There is an increase in the number of motor vehicles in the country. In the structure of vehicles, the vast majority are those with internal combustion engines. Currently, the prices of liquid fuels remain at a very high level. As a consequence, an increase in the share of fuel purchase costs in the global cost structure of enterprises is observed. It should be emphasized that the fuel and energy market is very strongly determined by current events in the world. As a consequence, one of the basic postulates put forward by micro and small road transport enterprises is the reliability of fuel supplies and the guarantee of an acceptable level of their prices. the aim of the article will be to organize and disseminate knowledge by indicating the attributes and determinants of the national system of liquid fuels for the needs of micro and small road transport enterprises in terms of supporting their decision-making process leading to the selection of an appropriate supplier of transport fuels. The aim of the article will be to organize and disseminate knowledge by indicating the attributes and determinants of the national system of liquid fuels for the needs of micro and small road transport enterprises in terms of supporting their decision-making process leading to the selection of an appropriate supplier of transport fuels. Its implementation will take place through: determining the current state of knowledge in the field of the discussed issues; description of the research method; analysis of the domestic transport fuel market; presenting the final conclusions. The research method used is a literature review on the subject and a statistical analysis.
PL
W Polsce znaczny udział transportu drogowego realizowany jest przez mikro i małe przedsiębiorstwa. Obserwuje się ciągły wzrost liczby pojazdów mechanicznych. W strukturze pojazdów zdecydowaną większość stanowią auta z silnikami spalinowymi. Obecnie ceny paliw płynnych są stosunkowo wysokie, co powoduje wzrost udziału kosztów zakupu paliw w ogólnej strukturze kosztów przedsiębiorstw. Należy podkreślić, że rynek paliw i energii jest zależny od bieżących wydarzeń na świecie. Jednym z podstawowych postulatów stawianych przez mikro i małych przedsiębiorców transportu drogowego jest pewność dostaw paliw i gwarancja ich cen. Celem artykułu jest uporządkowanie i upowszechnienie wiedzy, wskazanie atrybutów i determinantów kraj owego systemu paliw płynnych na potrzeby transportu drogowego W zakresie wspomagania procesu decyzyjnego, prowadzącego do wyboru odpowiedniego dostawcy paliw. Na podstawie przeglądu literatury i analizy statystycznej określono aktualny stan wiedzy w zakresie poruszanej problematyki, opisano metody badawcze, przeanalizowano kraj owy rynek paliw transportowych i przedstawiono wnioski końcowe.
EN
This paper presents the results of the analysis of the possibility of using the biochar from tomato haulm produced in the process of high-pressure pyrolysis for energy purposes. The research was carried out in laboratory conditions. For research purposes, four pressure and three temperature ranges have been adopted for research purposes. The experiments were carried out in 3 replications. In order to analyze the changes occurring in the material during the pyrolysis process, a physicochemical analysis was carried out consisting of technical analysis (moisture, ash, volatile matter content, calorific value) and elemental composition analysis (C, H, N, S content). The low-temperature pyrolysis process caused an increase in the carbon content in the tested material from 39% to a maximum of 50%, which also translated into an increase in lower calorific value from 14.52 to 23.31 MJ‧kg-1. Furthermore, the increase of this parameter was also correlated with the decrease in the moisture content of the material. Due to the constantly growing prices of fuels and waste management, this analysis may be helpful for agri-food producers looking for savings and using residual matter in an alternative way.
PL
W pracy przedstawiono wyniki analizy możliwości wykorzystania do celów energetycznych biowęgla z łętów pomidorowych, powstałego w procesie pirolizy wysokociśnieniowej. Badania przeprowadzono v warunkach laboratoryjnych. Do celów badawczych przyjęto cztery zakresy ciśnień i trzy zakresy temperatur. Eksperymenty przeprowadzono w 3 powtórzeniach. W celu przeanalizowania zmian zachodzących w materiale podczas procesu pirolizy przeprowadzono analizę fizykochemiczną składającą się z analizy technicznej (zawartość wilgoci, popiołu, części lotnej, wartość opałowa) oraz składu pierwiastkowego (zawartość C, H, N, S). Proces pirolizy niskotemperaturowej spowodował wzrost zawartości węgla w badanym materiale od 39% do maksymalnie 50%, co przełożyło się również na wzrost wartości opałowej z 14,52 do 23,31 MJ·kg·'. Ponadto wzrost tego parametru był również skorelowany ze spadkiem wilgotności materiału. Ze względu na stale rosnące ceny paliw i konieczność zagospodarowania odpadów analiza ta może być pomocna dla producentów rolnospożywczych poszukujących oszczędności i alternatywnego wykorzystania pozostałości.
EN
The geothermal potential is challenging to assess, as on the one hand it requires subsurface parametric description; on another – the variable surface influences the potential and geological conditions. In the article, the author presents a novel method for assessing geothermal potential and its environmental impact. The procedure is implemented to evaluate the geothermal potential of the Lublin trough. Geological modelling and GIS analyses are used to determine prospective areas where geothermal water accessibility and sufficient head demand occur in the direct vicinity. Maximal geothermal heat production is estimated, and upon that – possible avoided emissions of air pollutants. The study results indicate that this region's geothermal resources are of low temperature (<50°C), so the only opportunity for exploitation is the direct use of geothermal water in objects or the operation of ultra-low-temperature district heating systems. The main geothermal energy production potential of the Lublin trough is in its northern part, close to the Warszawa trough and nearby main fracture zones. In total, up to 300 GWh of geothermal heat per year might be produced and consumed in the study area if residential and commercial objects could take advantage of ultra-low-temperature district heating system. It would lead to locally significant limitation of air pollutant emissions and decreased fossil fuel consumption.
PL
Wspólna Polityka Rolna określa kierunki przemian strukturalnych sektora rolno-spożywczego do 2030 r. Związane jest to ze zmianą podejścia Unii Europejskiej do kwestii ochrony środowiska oraz dynamicznie zmieniającymi się uwarunkowaniami na rynku surowcow rolnych i energetycznych. Wyzwania wynikające z Europejskiego Zielonego Ładu oraz bieżące uwarunkowania gospodarki energetycznej mają istotne znaczenie dla funkcjonowania przemysłu spożywczego w Polsce, który wykazuje duże zapotrzebowanie na energię. Celem artykułu jest identyfikacja wyzwań w obszarze gospodarowania energią w przemyśle spożywczym w Polsce, ocena poziomu zużycia i efektywności energetycznej branż tego sektora oraz sformułowanie wniosków w zakresie zmian dostosowawczych do nowych uwarunkowań. Wyniki badań wskazują, że w gospodarce energetycznej poszczególnych branż przemysłu spożywczego nastąpiło dużo pozytywnych zmian, m.in. w efekcie zrealizowanych inwestycji zmniejszyły się energochłonność produkcji, emisja CO2 i ilość wytwarzanych odpadów. W związku z niekorzystnymi uwarunkowaniami zewnętrznymi konieczna będzie jednak dalsza poprawa efektywności energetycznej przedsiębiorstw, tak aby utrzymać konkurencyjność kosztową oraz spełnić rosnące wymagania w zakresie ochrony środowiska.
EN
The Common Agricultural Policy defines the directions of structural changes in the agri-food sector until the year 2030. This is related to the change in the European Union’s approach to environmental protection and the dynamically changing conditions on the market of agricultural and energy raw materials. The challenges arising from the European Green Deal and the current conditions of the energy economy are important for the functioning of the food industry in Poland, which is characterized by a high demand for energy. The aim of the article is to identify challenges in the area of energy management in the food industry in Poland, to assess the level of consumption and Energy efficiency of individual branches in this sector, and to formulate conclusions regarding changes to adapt to the new conditions. The results of the research indicate that there have been many positive changes in the Energy management of individual branches of the food industry, including as a result of the completed investments, the energy intensity of production, CO2 emissions and the amount of generated waste decreased. However, due to unfavorable external conditions, it will be necessary to further improve the energy efficiency of enterprises in order to maintain cost competitiveness and meet the growing requirements in the field of environmental protection.
PL
W artykule autor omawia i analizuje założenia polityki klimatycznej i energetycznej UE. Wskazuje także oraz opisuje stan i perspektywy polskiego sektora energetycznego w kontekście wykorzystania nowych źródeł energii. W publikacji znalazły się - poparte obliczeniami - argumenty za wykorzystaniem wodoru jako strategicznego źródła energii na przykładzie sektora kolejowego.
EN
In the article, the author submits and analyzes the assumptions of the EU climate and energy policy. He also indicates and describes the condition and prospects of the Polish energy sector in the context of the use of new energy sources. The publication includes - supported by calculations - arguments for the use of hydrogen as a strategic energy source on the example of the railway sector.
EN
In these times of the climate crisis surrounding us, the improvement of technologies responsible for the emission of the largest amounts of greenhouse gases is necessary and increasingly required by top-down regulations. As the sector responsible to a large extent for global logistics and supply chains, the fuel sector is one of the most studied in terms of reducing its harmful impact. The development of the next generations of fuels and biofuels, produced by companies using increasingly modern, cleaner and sustainable technologies, is able to significantly reduce the amount of greenhouse gases released into the atmosphere. In this case, the most effective solution seems to be the use of closed loops. Due to their low, often zero emission balance and the possibility of using waste to produce materials that can be reused, a circular economy is used in many sectors of the economy, while ensuring the emission purity of technological processes. One of the innovative solutions proposed in recent years is the installation created as part of the BioRen project, implemented under the Horizon 2020 program. The cooperation of European institutes with companies from the SME sector has resulted in the creation of an experimental cycle of modern technologies for the production of second-generation biofuels. The project involves the processing of municipal solid waste into second-generation drop-in biofuels. The entire process scheme assumes, in addition to the production of biofuels, the processing of inorganic fractions, the production of carbon material for the production of thermal energy, and the simultaneous treatment of wastewater.
PL
W dobie otaczającego nas kryzysu klimatycznego udoskonalanie technologii odpowiedzialnych za emisję największych ilości gazów cieplarnianych jest konieczne i coraz częściej wymagane odgórnymi regulacjami. Sektor paliwowy, jako ten odpowiedzialny w dużej mierze za światową logistykę i łańcuchy dostaw, jest jednym z najbardziej badanych pod względem ograniczania jego szkodliwego wpływu. Rozwój kolejnych generacji paliw i biopaliw, produkowanych przez firmy stosujące coraz nowocześniejsze, czystsze emisyjnie i zrównoważone technologie jest w stanie znacząco wpłynąć na obniżenie ilości gazów cieplarnianych do atmosfery. Najefektywniejszym rozwiązaniem wydaje się w tym wypadku zastosowanie obiegów zamkniętych. Ze względu na ich niski, często zerowy, bilans emisyjny oraz możliwość wykorzystania odpadów do produkcji materiałów, które mogą zostać ponownie wykorzystane, obiegi zamknięte znajdują zastosowanie w wielu sektorach gospodarki, zapewniając jednocześnie czystość emisyjną procesów technologicznych. Jednym z innowacyjnych rozwiązań, zaproponowanych w ostatnich latach, jest instalacja powstała w ramach projektu BioRen, realizowanego w ramach programu Horyzont 2020. Współpraca europejskich instytutów z firmami sektora MŚP zaowocowała powstaniem eksperymentalnego cyklu nowoczesnych technologii produkcji biopaliw drugiej generacji. Projekt zakłada przetwarzanie stałych odpadów komunalnych w biopaliwa II generacji typu drop-in. Cały schemat procesu zakłada, oprócz produkcji biopaliwa, przetwarzanie frakcji nieorganicznych, produkcję materiału węglowego do produkcji energii cieplnej a także jednoczesne oczyszczanie ścieków.
EN
Based on a review of scholarly literature and statements of IAEA and Ukrainian institutions, we try to attempt to analyze the current problems in nuclear energy of Ukraine during the war based on the example of the seized Zaporizhzhia nuclear power plant, which demonstrates the impact of this situation over global nuclear safety. Our study also outlines some solutions to this ongoing crisis and highlights that there is an urgent need for a new strategic vision at the global level with regard to nuclear safety and environmental protection. The “trial and error” approach is not the desired practice of ensuring nuclear safety in the world and therefore the world must today apply the lessons learned during the war in Ukraine to better protect people and the environment. The current situation in the world is complex and requires reasonable considerations, taking into account social, economic, environmental and geopolitical aspects. The introduction of minimum International Atomic Energy Agency (IAEA) safety standards that are illegally enforceable, the revision of the provisions of the IAEA statute and its amendment by providing the organization with the function of maintaining the harmonization of nuclear requirements, the need to improve the existing IAEA standards in terms of taking measures during the construction of nuclear power plants to protect them from missile attacks, as well as during the operation of NPPs are all analyzed as necessary steps required to solve the issues of improving nuclear safety in Ukraine, Europe, and the world. The cooperation of Ukraine with such states as the USA, Japan, South Korea, France, and the United Kingdom, and the creation of the coalition could help to put pressure on United Nations and IAEA at the international level to withdraw all troops and ammunition supplies from Zaporizhzhia NPP.
PL
Na podstawie przeglądu literatury naukowej, oświadczeń MAEA i ukraińskich instytucji, w artykule podjęto próbę analizy obecnych problemów w energetyce jądrowej Ukrainy w czasie wojny na przykładzie zajętej elektrowni jądrowej Zaporoże, która pokazuje wpływ tej sytuacji na globalne bezpieczeństwo jądrowe. Studium ukazane w artykule nakreśla również niektóre rozwiązania tego trwającego kryzysu i uświadamia, że istnieje pilna potrzeba nowej strategicznej wizji na poziomie globalnym w zakresie bezpieczeństwa jądrowego i ochrony środowiska. Podejście „prób i błędów” nie jest pożądaną praktyką zapewniania bezpieczeństwa jądrowego na świecie i dlatego dziś świat musi zastosować lekcje wyciągnięte podczas wojny na Ukrainie, aby lepiej chronić ludzi i środowisko. Obecna sytuacja na świecie jest złożona i wymaga rozsądnych rozważań, uwzględniających aspekty społeczne, gospodarcze, środowiskowe i geopolityczne. Wprowadzenie minimalnych standardów bezpieczeństwa MAEA, które można wyegzekwować w sposób niezgodny z prawem, rewizja postanowień statutu MAEA i jego zmiana poprzez zapewnienie organizacji funkcji utrzymania harmonizacji wymagań jądrowych, potrzeba poprawy istniejących standardów MAEA w zakresie podejmowania środków podczas budowy elektrowni jądrowych w celu ich ochrony przed atakami rakietowymi, a także podczas eksploatacji elektrowni jądrowych, są analizowane jako niezbędne kroki w celu rozwiązania kwestii poprawy bezpieczeństwa jądrowego na Ukrainie, w Europie i na świecie. Współpraca Ukrainy z takimi państwami jak USA, Japonia, Korea Południowa, Francja czy Wielka Brytania oraz utworzenie koalicji może pomóc na poziomie międzynarodowym wywrzeć presję na ONZ i MAEA, aby wycofały wszystkie wojska i zapasy amunicji z elektrowni jądrowej w Zaporożu.
EN
This paper investigates the relationship between energy use and economic development in five South-Asian countries using national-level panel data from 1990 to 2014. Although many studies have already addressed the nexus between energy consumption and economic growth, there is a mixed finding. According to many researchers, South Asian countries have expanded energy consumption since the 1990s. Therefore, energy consumption as a variable for a specific period is considered for the countries of Bangladesh, India, Nepal, Pakistan and Sri Lanka. Furthermore, foreign direct investment (FDI) and international trade (IT) are also considered to be related variables in this study. Pooled ordinary least squares, random effects, and fixed effects estimation techniques are used to provide a reliable estimation, offsetting the country fixed effects. The fixed effect model is the most effective model that reveals the association between electricity usage and growth factors, as per the specification test and Hausman test. A statistically significant correlation was found between international trade, FDI, economic growth, and power usage. FDI has the highest impact on the rising power demand, followed by global commerce and per capita GDP (gross domestic product). More specifically, the study findings reveal that increased power consumption causes more investment, which results in increased economic growth in South Asian countries. The findings of the study further show that FDI significantly impacted upon power consumption and the area of SAARC’s energy demand, resulting in the entry of new technology and an increase in both economic growth and energy consumption. Future policies may focus on investment in the energy sector to promote economic development.
PL
W niniejszym artykule zbadano związek między zużyciem energii a rozwojem gospodarczym w pięciu krajach Azji Południowej na podstawie danych panelowych na poziomie krajowym w latach 1990–2014. Chociaż wiele badań dotyczyło już związku między zużyciem energii a wzrostem gospodarczym, wyniki są mieszane. Według wielu badaczy kraje Azji Południowej zwiększyły zużycie energii od lat 90. W związku z tym zużycie energii, jako zmienna dla określonego okresu, jest rozpatrywane dla krajów Bangladeszu, Indii, Nepalu, Pakistanu i Sri Lanki. Ponadto bezpośrednie inwestycje zagraniczne (BIZ) i handel międzynarodowy (IT) są również uważane za powiązane zmienne w tym badaniu. Aby zapewnić wiarygodne oszacowanie, kompensując efekty stałe kraju, stosuje się połączone techniki najmniejszych kwadratów, efekty losowe i efekty stałe. Model z efektem stałym jest najbardziej efektywnym modelem, który ujawnia związek między zużyciem energii elektrycznej a czynnikami wzrostu, zgodnie z testem specyfikacji i testem Hausmana. Stwierdzono statystycznie istotną korelację między handlem międzynarodowym, BIZ, wzrostem gospodarczym i zużyciem energii. Największy wpływ na rosnące zapotrzebowanie na energię mają BIZ, a następnie światowy handel i PKB per capita (produkt krajowy brutto). Dokładniej, wyniki badania pokazują, że zwiększone zużycie energii powoduje więcej inwestycji, co skutkuje zwiększonym wzrostem gospodarczym w krajach Azji Południowej. Wyniki badania pokazują ponadto, że BIZ znacząco wpłynęły na zużycie energii i obszar zapotrzebowania SAARC na energię, powodując wejście nowych technologii i wzrost zarówno wzrostu gospodarczego, jak i zużycia energii. Przyszłe polityki mogą koncentrować się na inwestycjach w sektorze energetycznym w celu wspierania rozwoju gospodarczego.
EN
The energy sector, particularly that related to renewable energy, is growing rapidly. The analysis of factors influencing the production of electricity from solar radiation is important in terms of the ever-increasing number of photovoltaic (PV) installations. In Poland, the vast majority of installed PV capacity belongs to prosumers, so a comparative analysis was conducted for two domestic installations, one in southern Poland and the other located in central Poland. Operating conditions were compared, specifically with regard to irradiance, outdoor temperature and the calculated temperature of photovoltaic cells. The specific yield was then compared in daily, monthly and annual statements. The effects of the previously mentioned parameters on the energy yields of the two installations were considered. The installation in southern Poland in 2022 produced 5,136.6 kWh, which corresponds to a specific yield of 1,019.17 kWh/kWp, while the energy production of the installation in central Poland was 4,248.9 kWh, which corresponds to a specific yield of 965.67 kWh/kWp.
PL
W związku z dynamicznie rozwijającym się sektorem energetycznym, w szczególności związanym z energią pozyskiwaną ze źródeł odnawialnych, oraz z ciągle rosnącą liczbą instalacji fotowoltaicznych, ważne jest wzięcie pod uwagę czynników wpływających na produkcję energii z promieniowania słonecznego. Większość instalacji PV należy do prosumentów, dlatego praca porównawcza została przeprowadzona dla dwóch przydomowych instalacji, jednej w Polsce południowej i drugiej znajdującej się w Polsce środkowej. Porównano nasłonecznie, temperaturę zewnętrzną, jak i temperaturę ogniw fotowoltaicznych oraz wydajności właściwe w zestawieniach dziennych, miesięcznych i rocznych. Rozważono wpływ wcześniej wymienionych parametrów na uzyski z obu instalacji. Instalacja w Polsce południowej w 2022 roku wyprodukowała 5136,6 kWh, co odpowiada wydajności właściwej na poziomie 1019,17 kWh/kWp, natomiast produkcja instalacji w Polsce środkowej wyniosła 4248,9 kWh, co w przeliczeniu na wydajność właściwą wyniosło 965,67 kWh/kWp. Sprawność paneli fotowoltaicznych bezpośrednio wpływa na przetwarzanie promieniowania słonecznego na energię elektryczną. W Łękach sprawność ta wynosiła (w 2022 roku) 19,2%, a w Solcu 20,77% (instalacja z mikroinwerterami). Na przykładzie instalacji w Łękach przeanalizowano wpływ promieniowania słonecznego i temperatury otoczenia na temperaturę ogniwa fotowoltaicznego. Wzrost temperatury ogniwa skutkował spadkiem sprawności wytwarzanej energii o 0,370%/℃ w przypadku badanej instalacji.
EN
The rapid development of grid integration of solar energy in developing countries like India has created vital concerns such as fluctuations and interruptions affecting grid operations. Improving the consistency and accuracy of solar energy forecasts can increase the reliability of the power grid. Although solar energy is available in abundance around the world, it is viewed as an unpredictable source due to uncertain fluctuations in climate conditions. Global horizontal irradiance (GHI) prediction is critical to efficiently manage and forecast the power output of solar power plants. However, developing an accurate GHI forecasting model is challenging due to the variability of weather conditions over time. This research aims to develop and compare univariate LSTM models capable of predicting GHI in a solar power plant in India over the short term. The present study introduces a deep neural network-based (DNN) hybrid model with a combination of convolutional neural network bi-directional long short-term memory (CNN BiLSTM) to predict the one minute interval GHI of a solar power plant located in the southern region of India. The model’s effectiveness was tested using data for the month of January 2023. In addition, the results of the hybrid model were compared to the long short-term memory (LSTM) and BiLSTM deep-learning (DL) models. It has been observed that the proposed hybrid model framework is more accurate compared to the LSTM and BiLSTM architectures. Finally, a GHI prediction tool was developed to understand the trend of the results.
PL
Szybki rozwój integracji energii słonecznej z siecią elektroenergetyczną w krajach rozwijających się, takich jak Indie, wywołał istotne obawy, m.in. związane z wahaniami i przerwami wpływającymi na działanie sieci. Poprawa spójności i dokładności prognoz dotyczących energii słonecznej może zwiększyć niezawodność sieci energetycznej. Chociaż energia słoneczna jest dostępna w dużych ilościach na całym świecie, jest ona postrzegana jako nieprzewidywalne źródło ze względu na niepewne wahania warunków klimatycznych. Prognozowanie globalnego natężenia napromienienia horyzontalnego (GHI) ma kluczowe znaczenie dla efektywnego zarządzania i prognozowania mocy elektrowni słonecznych. Jednak opracowanie dokładnego modelu prognozowania GHI jest trudne ze względu na zmienność warunków pogodowych w czasie. Badania te mają na celu opracowanie i porównanie modeli LSTM zdolnych do przewidywania GHI w elektrowni słonecznej w Indiach w krótkim czasie. W niniejszym badaniu wprowadzono hybrydowy model oparty na głębokiej sieci neuronowej (DNN) z kombinacją dwukierunkowej konwolucyjnej sieci neuronowej z długą pamięcią krótkotrwałą (CNN BiLSTM) w celu przewidywania jednominutowych interwałów GHI elektrowni słonecznej zlokalizowanej w południowym regionie Indii. Skuteczność modelu została przetestowana przy użyciu danych za styczeń 2023 roku. Ponadto wyniki modelu hybrydowego porównano z modelami uczenia głębokiego (DL) z długą pamięcią krótkotrwałą (LSTM) i BiLSTM. Zaobserwowano, że proponowany model hybrydowy jest dokładniejszy w porównaniu do architektur LSTM i BiLSTM. Ostatecznie opracowano narzędzie do przewidywania GHI, aby zrozumieć trend wyników.
15
Content available remote Woda a energetyka w obliczu wyzwań i realizacji celów zrównoważonego rozwoju
PL
Świadomość, że woda pokrywa 72% powierzchni globu, powoduje, że traktujemy ją jako dobro nieograniczone i ogólnodostępne. Wzrost populacji ludzi związany jest z potrzebami w zakresie wytwarzania żywności oraz energii, a do tego woda jest niezbędna. Woda wykorzystywana jest w gospodarstwach domowych w rolnictwie, w transporcie wodnym, w produkcji energii elektrycznej i we wszystkich gałęziach przemysłu. Potrzeby poszczególnych sektorów gospodarki, w zakresie wykorzystania zasobów wodnych, mogą się różnić, a nawet być przeciwstawne. Dlatego rola właściwego zarządzania zasobami wodnymi jest bardzo istotna. Powinna uwzględniać zarówno potrzeby ludności i gospodarki, jak i wymagania ochrony wód i ekosystemów z nimi związanych oraz kwestie dotyczące ochrony przed powodzią i suszą.
EN
Knowing that the water covers 72% of the globe's surface makes us treat it as an unlimited and universal good. The growth of the human population is related to the needs for food and energy production, and water is essential for this. Water is used in households in agriculture, in water transport, in electricity production and in all industries. The needs of individual economic sectors in terms of the use of water resources may differ and even be contradictory. Therefore, the role of proper management of water resources is very important. It should take into account both the needs of the population and the economy, as well as the requirements for the protection of water and related ecosystems, as well as issues related to protection against floods and drought, and each of us can take action to save the water.
16
EN
The article presents issues related to equality in the creation of carbon dioxide equivalent. The impact of the increase in the number of residents and roommates, waste generation systems, information and material waste, material waste generation, the age of plastics and digitization are discussed.
PL
W artykule przedstawiono zagadnienia związane z równością w tworzeniu ekwiwalentu dwutlenku węgla. Omówiono wpływ wzrostu liczby mieszkańców i współlokatorów, systemów wytwarzania odpadów, odpadów informacyjnych i materialnych, wytwarzania odpadów materialnych, wieku tworzyw sztucznych i cyfryzacji.
EN
This study emphasizes on the physicochemical and grindability characteristics and work index of an alluvial formed silica dominated ferro-columbite mineral from Rayfield-Jos minefields in Plateau state, Nigeria. Investigations were also carried out in order to determine the mineralogy of the mineral deposits and most essentially the actual energy consumed during comminution and milling of the mineral so as to achieve the liberation size prior to high efficient mineral processing or beneficiation and the extraction of value metals. The distribution of the mineral particles as well as their sizes was determined, with a mineral liberation size fraction range essentially established as -150+90 μm particle sizes. Mass percentage of each size fraction obtained from PSD analysis conducted before and after comminution was also determined, obtaining 80% passing for both the mineral feeds and comminuted products. Berry and Bruce modified Bond’s work index was therefore obtained, and was determined to be within the range of 2.0414 to 2.5667 kWh/ton. Hence, the energy consumed or required to comminute or grind the Fe-columbite mineral to 80% passing is expected to fall within the range of 0.3613 to 0.4543 kWh. Thus, it could be said that a low milling work index as well as moderately low energy is required for comminution and this can be attributed to the mineralogy, mineral source and alluvial formation of the mineral reserve. Therefore, the grindability/PSD result of the mineral sample indicates that its mineralogy is considered a class of moderately soft mineral type in terms of texture with easy grindability.
EN
The paper represents the problem of expanding wells in hard and especially hard rocks. The general direction of solving this problem, theprevious methods of solving it and their shortcomings are shown. Anew method of drilling and blasting expansion of wells in strong and especially hard rocks is presented, using the energy of a directed explosion of low power to create a three-dimensional network of cracks in the rock mass around the well. The drawings ofthe tool for drilling and blasting expansion of wells in strong and especially hard rocks at the level of a draft design are given, and the calculation of the explosion energy of a single charge of explosives is carried out, and their mass necessary for such an explosion is determined.
EN
For many years, the amount of waste generated on a global scale has shown an increasing tendency and their management and logistic is becoming a growing problem for most countries in the world. Waste management is an important issue to be addressed, as it concerns the three basic pillars of sustainable development: social, economic, and environmental. Therefore, it seems necessary to take initiatives to reduce the amount of waste generated and improve the waste management system. The article aims to analyse changes in the way of waste management and logistics in the European Union countries and the classification of these countries on the basis of the achieved effects in waste management. The article analyses three selected factors that reflect the effects of achieving environmental objectives in waste management. The cluster analysis method was used for the analysis. It found that EU countries differ in the quality of the results achieved in waste management, depending on the achievement of environmental management and sustainability objectives. In addition, the results of the analysis showed that the time factor has a significant impact on the classification of countries. High dynamics of the quality of effects in waste management were observed in the period under review.
EN
One method to evaluate the energy behavior is energy and exergy analysis. These analyses applied to waste-to-energy conversion technologies provide the information on operating conditions, facilitating energy optimization processes. In this study, an energetic and exergy analysis was used on the thermochemical degradation process of polypropylene in a tubular reactor at 600 °C with a speed of 15 °C min-1. The experimental data used in this work were taken from the study by Parku et al. (2020). According to the results, energy efficiencies of up to 43% and exergy efficiencies of 38% were achieved, and it was also observed, according to what was reported, that the products obtained from pyrolysis contain a high calorific value and can be used as alternative fuels.
first rewind previous Strona / 46 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.