Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 9

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  direction finding
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
W artykule przedstawiono wyznaczone wartości mocy sygnału uniemożliwiającego wyznaczenie lokalizacji węzłów sieci radiowej przy pomocy algorytmu MUSIC. Omówiono sposób przeprowadzania pomiarów mocy sygnału maskującego oraz przedstawiono otrzymane wyniki. Wszystkie przedstawione symulacje i obliczenia wykonano w środowisku MATLAB.
EN
The paper presents the determined values of the power of a signal that prevents the localization of radio network nodes using the MUSIC algorithm. The method of measuring the power of the masking signal was discussed, and the obtained results were presented. All presented simulations and calculations were performed in the MATLAB environment.
PL
W pracy zaprezentowano strukturę układu pracującego w pasmie L, przeznaczonego do wykrywania pocisków przeciwpancernych na małych odległościach. Dzięki odpowiedniemu rozmieszczeniu anten odbiorczych możliwe jest określenie kierunku oraz odległości do celu. Struktura jest przewidziana do wykrywania pocisków przeciwpancernych na odległościach nie większych niż 100 metrów. Przedstawiono konstrukcję i widok układu badanego w warunkach poligonowych. Uzyskane efekty wskazują na możliwość budowy, w oparciu o zbudowany model, elementów systemu obrony aktywnej pojazdów przed pociskami przeciwpancernymi, wykorzystującego inteligentne antypociski.
EN
The paper presents the structure of the system operating in the L band, designed for anti-tank missiles detection at short distances. Thanks to the appropriate antennas arrangement it is possible to determine not only distance to the target but the direction to it as well. The unit structure is designed to detect anti-tank missile at distances not greater than 100 meters. The paper presents construction and view of the device that has been tested in the military training ground conditions. The achieved results indicate the possibility of construction, based on the so far worked out elements, the active defense system for vehicles protection against anti-tank missiles. Presented in the paper L band device can interact with so called anti-missile shell capable of destroying anti-tank missiles.
PL
W artykule przedstawiono strukturę przenośnego układu do namierzania źródeł sygnałów mikrofalowych. Układ składa się z dwóch anten kierunkowych oraz mikrofalowego dyskryminatora fazy zbudowanego w oparciu o sześciowrotnik mikrofalowy. Sześciowrotnik może być wykonany na jednej płytce drukowanej przez co cały układ może być relatywnie lekki oraz mieć bardzo małe wymiary. Układ jest przewidziany do pracy w pasmie 8 – 12 GHz. Przedstawiono wyniki symulacji w funkcji częstotliwości oraz w dziedzinie kąta położenia namierzanego źródła emisji.
EN
The structure of the portable monopulse direction finding (DF) device was presented in the paper. The described DF device consists of the pair of directional antennas and microwave phase discriminator based on microwave six-port. The device is being designed to work in 8 – 12 GHz frequency band. Results of simulation in frequency and angle of signal’s arrival domain were shown.
4
Content available remote Identyfikacja i pelengacja źródła dźwięku
PL
W referacie przedstawiono opis rozwiązań sprzętowych i programowych modelu urządzenia do rozpoznawania i namierzania źródła dźwięku. Poprawność działania modelu i opracowanego oprogramowania zweryfikowano w czasie badań w warunkach laboratoryjnych i na strzelnicy. Wyniki badań potwierdziły słuszność przyjętych rozwiązań.
EN
In the paper there are presented describtion of the hardware and software of the device model to recognition and direction finding of sound source. The correctness of the modeland the developed software was verified during tests in laboratoryand at the fire range. The results confirmed the validity of the solutions.
PL
W referacie przedstawiono zakres wykorzystania ruchomych stacji pomiarowych, w jednym z ustawowych zadań Urzędu Komunikacji Elektronicznej jakim jest gospodarka zasobami częstotliwości [1]. Omówione zostały w nim zarówno zagadnienia pomiarów sygnałów radiowych zgodnych z odpowiednimi zaleceniami Międzynarodowej Unii Telekomunikacyjnej (zwanej dalej ITU) [2] jak i procesy monitorowania i lokalizowania źródeł sygnałów radiowych ze szczególnym uwzględnieniem nowatorskiej metody radionamierzania w ruchu.
EN
The paper presents the scope of using mobile monitoring stations in one of the statutory duties of the Office of Electronic Communications (UKE) in the field of the frequency resources management. An overview of the basic parameters and control functions of a monitoring station is presented in Section 2. The available types of measurements with appropriate ITU recommendations are described. An example of a correct and incorrect result of the radio signal measurement based on the difference of the percentage distribution frequency deviation (Figs. 1, 2) is given in Section 3. The use of an adaptation mask in the process of spectrum monitoring is described in Section 4. Its efficiency is demonstrated by comparing the actual frequency spectrum with that generated before and the saved envelope of this frequency spectrum. Three modes of direction finding are reviewed: the stationary direction finding, the synchronized direction finding and the especially innovative method of mobile direction finding. The mobile direction finding method is based on an advanced mathematical analysis of all potential bearings (Fig. 5). It enables direction finding of many radio sources whose signals are present in the same radio channels simultaneously. It enables limiting the searching area to one or several zones and makes the accuracy of the direction finding least dependable on the precision of direction finding equipment and on the shape of a monitoring vehicle.
PL
Z uwagi na dużą przydatność urządzeń rozpoznania i wykrywania emisji, autorzy podjęli prace badawcze oraz konstrukcyjne, dotyczące rozwiązań układowych natychmiastowego pomiaru kierunku opromieniowania w zakresie mikrofal z wykorzystaniem wielowrotników Butlera. W artykule przedstawiono przegląd rozwiązań układowych monoimpulsowego systemu rozpoznania i namiaru źródeł promieniowania w paśmie mikrofalowym. W części dotyczącej badań eksperymentalnych przedstawiony jest wynik badań układów pracujących w paśmie 2÷4 GHz.
EN
Research and development works over systems were undertaken for their great usability. The systems concerns microwave detection used Butler's matrix. In this paper is presented the review of the monoimpulse systems dedicated for detection of the bearing direction in microwave band. In this paper in the part dedicated for experiments description we show the results for devices working in the 2-4 GHz band.
PL
Artykuł dotyczy systemów namiaru opartych na matrycach Butlera. Systemy te mogą być wykorzystane do określenia kierunku położenia urządzeń promieniujących fale elektromagnetyczne lub obiektów oświetlonych sygnałami mikrofalowymi. Przedstawiono wyniki symulacji komputerowych systemów z matrycami Butlera 8 x 8 podłączonymi do szyków antenowych płaskich i cylindrycznych. Analizie poddano układy z szykami płaskimi kompletnymi oraz z szykami płaskimi o zredukowanej liczbie anten.
EN
The paper concerns systems with a so-called Butler matrix used for an instantaneous direction finding of radiation sources or targets iIIuminated by microwave signals. There are presented the results of computer simulations of systems with the 8 x 8 Butler matrix connected to planar and cylindrical antenna arrays. It has been taken into consideration the complete planar antenna array and planar array with reduced number of antennas.
PL
Systemy namiaru źródeł promieniowania elektromagnetycznego używane są do wykrywania i pomiaru parametrów sygnałów promieniowanych przez różne urządzenia. Wykorzystują one często monoimpulsowe sposoby pracy. Zbudowane są z dookólnej sieci antenowej oraz układu formowania wiązki antenowej. W artykule przedstawiono układ formowania złożony z sześciu sprzęgaczy kwadraturowych i dwóch prowadnic falowych. Ponadto zamieszczono omówione metody i wynik analizy teoretycznej wraz z wynikami pomiarów modelu pracującego w pasmie 2-4GHz.
EN
Receivers are main compenents of communication, detecting and warning systems. They are used to detect and measure parameters of signals radiated by different power sources. They contain antenna arrays and beam forming networks. Analysis of phase shifts between signals at corresponding outputs permits to estimate the direction of source of radiation. So constructed circuit makes it possible to measure any direction of incoming signals without movement of antennas and observes all 360° or part of space in azimuth. The antenna array can be composed of 4, 8, 16, 32 etc. antennas. Four antennas receiving system is the simplest arrangement, in which signal forming circuit can be used. The paper introduces a new two design of signal forming circuit composed of quadrate couplers and phase shifters. The method and results of theoretical analysis as well asresults of measurements in the range of 2-4GHz are also presented.
PL
Przedstawiono wybrane zastosowania mikrofal we współczesnej technice wojskowej i w medycynie, a w szczególności do diagnozowania ognisk rakowych.
EN
The paper presents some informations about applications of microwaves signals in modern military equipment and for cancer's diagnostic.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.