Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Acta Mechanica et Automatica

2 2024

Powiadomienia systemowe

Sesja wygasła!

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Novel pla composites modified with steel fibres and (3-thiopropyl) polysilsesquioxane derivatives

Pakuła Daria, Sztorch Bogna, Romańczuk-Ruszuk Eliza, Marciniec Bogdan, Przekop Robert E.

Acta Mechanica et Automatica

2024

Vol. 18, no. 4

707--713

In recent years, a significant increase in the development of new composite materials with desirable mechanical, thermal or surface properties has been observed. One of the popular polymers on the market is polylactide. This article explores how to modify the polymer using steel fibres and organosilicon compounds (SSQ-SH, SSQ-SH-OCT, and SSQ-SH-OFP) to enhance its properties. Test samples were obtained by injection molding with varying concentrations of 0.5%, 1%, 1.5%, 2.5%, and 5% of steel fibres. Mechanical tests, including tensile strength, elongation at break, and impact strength, were conducted, along with an analysis of the contact angle. The modified samples showed higher impact strength values, with the PLA /steel fibres /SSQ-SH sample seeing an increase of 12%. The addition of modifiers with fluoroalkyl groups led to a contact angle increase of 8.5% compared to neat PLA. Thermal tests (TGA) were also carried out to determine the influence of fibres and organosilicon compounds on decomposition.

Mechanical properties of 3D printed pla scaffolds for bone regeneration

Kundreckaitė Paula, Šešok Andžela, Stonkus Rimantas, Gaidulis Gediminas, Romańczuk-Ruszuk Eliza, Pauk Jolanta

Acta Mechanica et Automatica

2024

Vol. 18, no. 4

682--689

The growing interest in biodegradable scaffolds for bone regeneration created a need to investigate new materials suitable for scaffold formation. Poly(lactic acid) (PLA) is a polymer commonly used in biomedical engineering, e.g. in tissue engineering as a biodegradable material. However, the mechanical behavior of PLA along its degradation time is still not explored well. For this reason, the mechanical properties of PLA scaffolds affected by incubation in physiological medium needs to be investigated to show the potential of PLA to be used as a material for biodegradable scaffold formation. The purpose of this research is to determine the mechanical properties of PLA scaffolds before and after incubation, and to apply constitutive material models for further behavior prediction. Two sets of PLA scaffolds were printed by the 3D printer “Prusa i3 MK3S” and sterilized by ultraviolet light and ethanol solution. The first set of specimens was incubated in DMEM (Dulbecco’s Modified Eagle Medium) for 60, 120, and 180 days maintaining 36.5 °C temperature. The mechanical properties of the scaffolds were determined after performing the compression test in the “Mecmesin MultiTest 2.5-i” testing stand with a force applied at two different speed modes. The obtained data was curve fitted with the hyperelastic material models for a model suitability study. The second set of specimens was incubated in PBS (Phosphate Buffered Saline) for 20 weeks and used in a polymer degradation study. The obtained results show that the mechanical properties of PLA scaffolds do not decrease during incubation in physiological medium for a predicted new bone tissue formation period, though hydrolysis starts at the very beginning and increases with time. PLA as a material seems to be suitable for the use in bone tissue engineering as it allows to form biocompatible and biodegradable scaffolds with high mechanical strength, required for effective tissue formation.