Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 International Journal of Electronics and Telecommunications

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Start Acceleration of the Space GPS Receiver

Kovář Pavel

International Journal of Electronics and Telecommunications

2020

Vol. 66, No. 4

745--752

The cold start of the space GPS receiver, i.e. the start without any information about the receiver position, satellite constellation, and time, is complicated by a large Doppler shift of a navigation signal caused by the satellite movement on the Earth orbit. That increases about five times the search space of the navigation signals compared to the standard GPS receiver. The paper investigates a method of the acceleration of the GPS receiver cold start time designed for the pico- and femto-satellites. The proposed method is based on a combination of the paralel search in Doppler frequency and PRN codes and the serial search in code phase delay. It can shorten the cold start time of the GPS receiver operating on LEO orbit from about 300 to 60 seconds while keeping the simplicity of FPGA signal processor and low power consumption. The developed algorithm was successfully implemented and tested in the piNAV GPS receiver. The Energy required for the obtaining of the position fix was reduced five times from 36 on to 7.7 Joules. This improvement enables applications of such receiver for the position determination in smaller satellites like Pocket Cube or femto-satellites with a lower energy budget than the Cube Satellite.

Study of the GNSS Jamming in Real Environment

Morong Tomáš, Puričer Pavel, Kovář Pavel

International Journal of Electronics and Telecommunications

2019

Vol. 65, No. 1

65--70

GNSS systems are susceptible to radio interference despite then operating in a spread spectrum. The commerce jammers power up to 2 watts that can block the receiver function at a distance of up to 15 kilometers in free space. Two original methods for GNSS receiver testing were developed. The first method is based on the usage of a GNSS simulator for generation of the satellite signals and a vector signal RF generator for generating different types of interference signals. The second software radio method is based on a software GNSS simulator and a signal processing in Matlab. The receivers were tested for narrowband CW interference, FM modulated signal and chirp jamming signals, and scenarios. The signal to noise ratio usually drops down to 27 dBc-Hz while the jamming to signal ratio is different for different types of interference. The chirp signal is very effective. The jammer signal is well propagated in free space while in the real mobile urban and suburban environment it is usually strongly attenuated.