Wyniki wyszukiwania - BazTech

1

Casting Quality Improvement by Gating System Optimization

Bruna M., Galčík M.

Archives of Foundry Engineering

|

2021

|

Vol. 21, iss. 1

132--136

EN

One of the main reason for decreased internal homogeneity of aluminium alloy castings is reoxidation. The resulting products of reoxidation are doubled oxides, so called "bifilms". Submitted paper deals with optimization of gating system design in order to reduce reoxidation processes taking place in mold cavity. Experimental work compares and evaluates three gating systems designs based on non-pressurized and naturally pressurized principles. Unconventional spin trap extension of runner was used in third design. Among the evaluated aspects were: mechanical properties, hot tearing index, visual inspection of average porosity amount, numerical simulation of velocity, turbulence and oxide amount. Paper aim is also to clarify the reoxidation phenomenon by visualization with the aid of ProCAST numerical simulation software. Results of mechanical properties and hot tear index clearly confirmed the positive effect of the naturally pressurized gating system with applied element for velocity reduction.

2

Effect of Filter Thickness on Reoxidation and Mechanical Properties of Aluminium Alloy AlSi7Mg0.3

Bruna M., Remišová A., Sládek A.

Archives of Metallurgy and Materials

|

2019

|

Vol. 64, iss. 3

1100--1106

EN

The melt cleaning is an important aspect in the production of high-quality aluminum castings. Specifically inclusions within the melt and an excessively high hydrogen content lead to defects and undesired porosity in the castings. Although it is possible to reduce the amount of hydrogen and oxidic inclusions by purge gas treatment and the use of melting salts, it is impossible toremove oxides (bifilms) created during filling of gating system. Paper deals with the effects of melt quality and the placement of a filter in the filling system on Al-7%Si-Mg alloy mechanical properties. Three different filters were used: (a) rectangular ceramic pressed filter with 3 mm thickness (b) cubical pressed ceramic filter with thickness 10 mm (c) cubical pressed ceramic filter with thickness 22 mm. The results showed that the highest tensile strength values were obtained from the filter with thickness of 22 mm. Numerical simulation analysis of the filling process showed that velocity reduction by filter is the major phenomenon affecting the mechanical properties. Another evaluated aspect during experiments was capability of filters to retain old bifilms. For this purpose multiply remelted alloy was prepared and analyzed. Results showed that filter efficiency increases with decreasing melt quality as a result of possibility to retain "old” bifilms better than small and thin "new” bifilms.

3

Effect of Strontium Inoculation on Hot Tearing in Aluminium Alloys

Bolibruchová D., Bruna M., Pastirčák R., Major-Gabryś K.

Archives of Metallurgy and Materials

|

2018

|

Vol. 63, iss. 4

1837--1842

EN

Main aim of submitted work is evaluation and experimental verification of inoculation effect on Al alloys hot-tear sensitivity. Submitted work consists of two parts. The first part introduces the reader to the hot tearing in general and provides theoretical analysis of hot tearing phenomenon. The second part describes strontium effect on hot tearing susceptibility, and gives the results on hot tearing for various aluminium alloys. During the test, the effect of alloy chemical composition on hot tearing susceptibility was also analyzed. Two different Al-based alloys were examined. Conclusions deals with effect of strontium on hot tearing susceptibility and confirms that main objective was achieved.

4

Reoxidation Processes Prediction in Gating System by Numerical Simulation for Aluminium Alloys

Bruna M., Bolibruchova D., Pastričák R.

Archives of Foundry Engineering

|

2017

|

Vol. 17, iss. 3

23--26

EN

Pouring of liquid aluminium is typically accompanied by disturbance of the free surface. During these disturbances, the free surface oxide films can be entrained in the bulk of liquid, also pockets of air can be accidentally trapped in this oxide films. The resultant scattering of porosity in castings seems nearly always to originate from the pockets of entrained air in oxide films. Latest version of ProCast software allows to identify the amount of oxides formed at the free surface and where they are most likely to end-up in casts. During a filling calculation, ProCast can calculate different indicators which allow to better quantify the filling pattern. The fluid front tracking indicator “ Free surface time exposure” has the units [cm2s]. At each point of the free surface, the free surface area is multiplied by the time. This value is cumulated with the value of the previous timestep. In addition, this value is transported with the free surface and with the fluid flow. Experiments to validate this new functions were executed.

5

Filtration of aluminum alloys and its influence on mechanical properties and shape of eutectical silicium

Bruna M., Bolibruchova D., Kantorik R.

Archives of Foundry Engineering

|

2008

|

Vol. 8, iss. 2

13-16

EN

Filtration during casting of high quality aluminum alloys belongs to main refining methods. Even when there are many years of experiences and experimental works on this subject, there are still some specific anomalies. While using ceramic filtration media during casting of aluminum alloys, almost in all experiments occurred increase of strength limit and atypical increase of extension. This anomaly was not explained with classical metallurgical methods, black-white contrast after surface etching neither with color surface etching. For that reason was used deep etching on REM. By using pressed ceramic filters, by studying morphology eutectical silicon was observed modification morphology of eutectical silicon, this explains increase extension after filtration. Pressed ceramic filters were used on experimental works. Casting was executed on hardenable alloy AlSi10MgMn.