Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 2015

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Preparation Of Fine Grained SiC At Reduced Temperature By Two-Step Sintering

Kim K.-W., Oh K.-S., Lee H., Kim B. S., Chung T.-J.

Archives of Metallurgy and Materials

2015

Vol. 60, iss. 2B

1539--1542

Two-step sintering route was applied for the densification SiC by promoting the role of liquid phase. The specimen contained 8 vol% of liquid phase composed of Al2O3 and Y2O3. The heating schedule consisted with initial rapid heating to 2000°C and immediate quenching to 1700 or 1750°C. By heating at elevated temperature, even distribution of the liquid phase was intended. The heat treatment at reduced temperature was to suppress the evaporative loss of the liquid and to secure the time for densification. The two-step sintering effectively suppressed loss of mass and coarsening. The resultant SiC was thus dense and was composed of fine grains exhibiting hardness of 2321 kgf/mm2.

Influence of Loading Time of a Load Plate and Sample Size on the Measurement of Physical Properties of Resilient Materials

Kim K.-W., Yeon J.-O., Yang K.-S., Kim M.-J.

Archives of Acoustics

2015

Vol. 40, No. 2

159--167

This study investigates several factors that have not been specified in the standard for dynamic stiffness, compressibility, and long-term deformation; these factors can be used to evaluate the acoustic and physical performances of resilient materials. The study is intended to provide basic data for deriving the factors that need to be additionally reviewed through the standards. Since magnitude of dynamic stiffness changes with an increase in loading time, it is necessary to examine the setting of the loading time for a load plate under test conditions. Samples of size 300×300 mm, rather than 200×200 mm, yielded more reliable results for compressibility measurement. Since the test to infer long-term deformation of resilient materials after a period of 10 years in some samples showed variation characteristics different from those specified in the standards, it is recommended that the test method should be reviewed through ongoing research.