Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 3

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The performance of long-wave infrared (LWIR) x = 0.22 HgCdTe avalanche photodiodes (APDs) was presented. The dark currentvoltage characteristics at temperatures 200 K, 230 K, and 300 K were measured and numerically simulated. Theoretical modeling was performed by the numerical Apsys platform (Crosslight). The effects of the tunneling currents and impact ionization in HgCdTe APDs were calculated. Dark currents exhibit peculiar features which were observed experimentally. The proper agreement between the theoretical and experimental characteristics allowed the determination that the material parameters of the absorber were reached. The effect of the multiplication layer profile on the detector characteristics was observed but was found to be insignificant.
EN
This paper presents examples of infrared detectors with mercury cadmium telluride elaborated at the Institute of Applied Physics, Military University of Technology and VIGO Photonics S.A. Fully doped HgCdTe epilayers were grown with the metal organic chemical vapour deposition technique which provides a wide range of material composition covering the entire infrared range from 1.5 μm to 14 μm. Fundamental issues concerning the design of individual areas of the heterostructure including: the absorber, contacts, and transient layers with respect to their thickness, doping and composition were discussed. An example of determining the gain is also given pointing to the potential application of the obtained devices in avalanche photodiode detectors that can amplify weak optical signals. Selected examples of the analysis of current-voltage and spectral characteristics are shown. Multiple detectors based on a connection in series of small individual structures are also presented as a solution to overcome inherent problems of low resistance of LWIR photodiodes. The HgCdTe detectors were compared with detectors from III-V materials. The detectors based on InAs/InAsSb superlattice materials achieve very comparable parameters and, in some respects, they are even superior to those with mercury cadmium telluride.
EN
Accurate determination of material parameters, such as carrier lifetimes and defect activation energy, is a significant problem in the technology of infrared detectors. Among many different techniques, using the time resolved photoluminescence spectroscopy allows to determine the narrow energy gap materials, as well as their time dynamics. In this technique, it is possible to observe time dynamics of all processes in the measured sample as in a streak camera. In this article, the signal processing for the above technique for Hg1-xCdxTe with a composition x of about 0.3 which plays an extremely important role in the mid-infrared is presented. Machine learning algorithms based on the independent components analysis were used to determine components of the analyzed data series. Two different filtering techniques were investigated. In the article, it is shown how to reduce noise using the independent components analysis and what are the advantages, as well as disadvantages, of selected methods of the independent components analysis filtering. The proposed method might allow to distinguish, based on the analysis of photoluminescence spectra, the location of typical defect levels in HgCdTe described in the literature.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.