Wyniki wyszukiwania - BazTech

1

Szacowanie odkształceń skurczowych w fibrobetonie w świetle wybranych norm

Bacharz Magdalena, Bacharz Kamil, Raczkiewicz Wioletta

Inżynieria i Budownictwo

|

2022

|

R. 78, nr 11-12

558--562

PL

W pracy przedstawiono próbę odkształceń skurczowych betonu z dodatkiem włókien stalowych i propylenowych na bazie wybranych norm. Przyczyną podjęcia tego tematu jest brak przepisów normowych pozwalających na prognozę skurczu w fibrobetonie. Obliczone wartości odkształceń skurczowych porównano z wartościami doświadczalnymi i ukazano możliwość ich szacowania w fibrobetonie, bazując na wybranych podejściach normowych.

EN

The paper presents a study of shrinkage deformation of concrete with the addition of steel and propylene fibers based on selected standards. The reason for taking up this topic is the lack of normative standards that would allow predicting the shrinkage of fiber concrete. The calculated values of shrinkage deformations were compared with experimental values and the possibility of their estimation in fiber concrete based on selected standard approaches was shown.

2

Influence of maturing conditions of steel-fibre reinforced concrete on its selected parameters

Czajkowska Agnieszka, Raczkiewicz Wioletta, Bacharz Magdalena, Bacharz Kamil

Budownictwo o Zoptymalizowanym Potencjale Energetycznym

|

2020

|

Vol. 9 Nr 1

47--54

EN

In the article the impact of varying humidity conditions on selected strength properties of hardened steel fibre-reinforced concrete (such as Young’s modulus and the compressive strength of concrete) were analysed. The analysis shows that the value of the Young’s modulus of concrete cured under 100% humidity conditions is the highest; 35% higher compared to concrete hardening in the laboratory hall and about 18% higher than modulus measured in the concrete samples maturing in the chamber. A much higher compressive strength of approx. 25% was observed in samples hardening under 100% humidity conditions than in the other two environments. It was also observed that the non-uniform distribution of samples in the chamber and opening and closing the chamber during sample maturation had an impact on the dispersion of the results and due to the coefficient of variation, results can be even worse than in free-maturing samples.

3

Experimental verication of a numerical modelof RC beam with CFRP rope strengthening

Szczecina Michał, Tworzewski Paweł, Bacharz Kamil

Computer Assisted Methods in Engineering and Science

|

2019

|

vol. 26, no. 3-4

137-151

EN

This paper presents results of experimental tests and numerical analysis of reinforced concrete (RC)beams containing an additional carbon fibre rope strengthening. Two single-span RC beam specimenswith classical reinforcing bars and stirrups and one carbon fibre rope as near-surface mounted (NSM)strengthening were tested in a four-point bending test. The paper presents and compares the resultsregistered by the ARAMIS system during the test of two beams with carbon fibre rope under monotonicload with the results obtained in finite element analysis with Abaqus software using the concrete damagedplasticity model for concrete.