Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Journal of Ecological Engineering

Powiadomienia systemowe

Sesja wygasła!

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Use of Metal Oxide-Modified Aerated Concrete for Cleaning Flue Gases from Carbon Monoxide

Ivanenko Olena, Gomelya Nikolai, Shabliy Tetyana, Trypolskyi Andrii, Nosachova Yuliia, Leleka Serhii, Trus Inna, Strizhak Peter

Journal of Ecological Engineering

2021

Vol. 22, nr 5

104--113

The necessity of development of technical solutions that will allow to reduce carbon monoxide emissions of flue gases of industrial productions is substantiated. It is shown that the most rational design solution to the problem of carbon monoxide pollution during the firing of electrode blanks is the use of aerated concrete blocks with a catalyst, which can be quickly and conveniently located directly on the carbon material of the “green” electrodes pouring in the subfloor space of the firing furnaces. Modified by oxides of Mn4+, Fe2+, Fe3+, Cu2+, Cr3+ -catalysts based on aerated concrete were obtained. It is shown that in an empty reactor in the temperature range 200–400 °С the degree of conversion of carbon monoxide in the absence of a catalyst is zero. It is established that on the investigated catalysts based on aerated concrete 100% oxidation of carbon monoxide is achieved at a temperature of 390 °C in the case of using a mixture of catalyst powders 30% CuO + 70% MnO2, 40% CuO + 60% MnO2, 50% Fe (FexCr1-x) 2O4 + 50% MnO2; 50% Fe3O4 + 50 % MnO2. It is determined that the addition of ferrite catalyst powder in aerated concrete in a mixture or without manganese dioxide does not critically affect the mechanical properties of the products.

Assessment of the Effect of Oxygen and Carbon Dioxide Concentrations on Gas Evolution During Heat Treatment of Thermoanthracite Carbon Material

Panov Yevgen, Gomelia Nikolai, Ivanenko Olena, Vahin Andrii, Leleka Serhii

Journal of Ecological Engineering

2020

Vol. 21, nr 2

139--149

The processes of the interaction of carbon material (thermoanthracite pouring) with a gas-air mixture in a heat chamber were studied while heating to 800–850°C. The influence of temperature, oxygen and carbon dioxide concentration on the formation efficiency of carbon monoxide, carbon dioxide, hydrogen and methane was determined. A pilot plant was created, which provided heating of the carbon material at the indicated temperatures and regulating the supply of air and carbon dioxide. It was found that a noticeable oxidation of the carbon material in the heat chamber in the presence of oxygen or carbon dioxide occurs at the temperatures above 500°C. Significant concentrations of carbon monoxide were formed at temperatures of 600–800°C. It was shown that when using gas mixtures with an oxygen content of 7–21% minimum concentrations of carbon monoxide are formed at an oxygen content of 14%. At temperatures above 500°C, the formation of hydrogen and methane in gas flows was noted. The methane yield increased with the decreasing oxygen content.