Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

A pre-protection method for a pipe-jacking channel over shield tunnels

Cui Yunliang, Yang Xukun, Wang Xinquan, Diao Hongguo, Li Xiao, Gao Yuanyuan

Bulletin of the Polish Academy of Sciences. Technical Sciences

2024

Vol. 72, nr 2

art. no. e148443

With the improvement of the planning level of underground space, the location of the planned under-crossing tunnel can be known in advance when constructing the upper-span tunnel. Therefore, pre-protection measures can be taken in advance during the construction of the upper-span tunnel. A new pre-protection method of a pipe-jacking channel was proposed to reduce the adverse effects of under-crossing shield tunnels. Numerical simulations of different pre-protection schemes were carried out using the finite element method to analyze its deformation control effect. The simulation results show that the deformation control effect of the gantry reinforcement scheme is the most significant. It is shown that the displacement of the pipe-jacking channel is more significantly suppressed with pre-protection measures than without preventive protection measures. The vertical displacement curve of the pipe-jacking channel exhibits a “W” shape after the construction of the double-lane shield underpass. By comparing the three different working conditions, it is found that the maximum vertical displacement and surface settlement of the pipe-jacking channel greatly reduced the gantry reinforcement pre-protection. Compared with Case 3, the effect of the pre-protection measures adopted in Case 2 was less obvious, which indicated that the form of the pre-protection had an important influence on controlling the deformation of the pipe-jacking channel.

Experimental and numerical study on the classification of a cyclonic field in a flotation column

Li Xiaoheng, Li Xiao, Yan Xiaokang, Wang Lijun, Zhang Haijun

Physicochemical Problems of Mineral Processing

2020

Vol. 56, iss. 3

421--431

The cyclonic-static micro-bubble flotation column (FCSMC) performs well in fine mineral flotation. Compared to traditional flotation columns, its design innovatively introduces a cyclonic structure. The separation of middling and tailing occurs in the cyclonic flow field induced by a cyclonic reversal cone. In this study, the particle size distribution analysis and computational fluid dynamics (CFD) simulations were conducted to reveal the particle distribution law and the classification mechanism in cyclonic flow fields under different circulation pressures. The results showed that particle size showed the same distribution tendency as tangential velocity in the radial direction: both increase from the center and decrease around the wall. As circulation flux increased, the tangential velocity increased, and the particle size differences in the radial direction also increased. The position of the largest particles will move to outside as the largest value of tangential velocity migrates the outward in the radial direction. According to the particle size distribution of the feed, it can be adjusted to the flow field to change the particle distribution, thereby improving the efficiency of separation. This study has an important guiding significance for column design and adjustment of the operating parameters of the flotation process.