Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Polish Maritime Research

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

A numerical and experimental study of marine hydrogen–natural gas–diesel tri–fuel engines

Zhao Rui, Xu Leping, Su Xiangwen, Feng Shiquan, Li Changxiong, Tan Qinming, Wang Zhongcheng

Polish Maritime Research

2020

nr 4

80--90

Maritime shipping is a key component of the global economy, representing 80–90% of international trade. To deal with the energy crisis and marine environmental pollution, hydrogen-natural gas-diesel tri-fuel engines have become an attractive option for use in the maritime industry. In this study, numerical simulations and experimental tests were used to evaluate the effects of different hydrogen ratios on the combustion and emissions from these engines. The results show that, in terms of combustion performance, as the hydrogen proportion increases, the combustion ignition delay time in the cylinder decreases and the laminar flame speed increases. The pressure and temperature in the cylinder increase and the temperature field distribution expands more rapidly with a higher hydrogen ratio. This means that the tri-fuel engine (H2 +CH4 +Diesel) has a faster response and better power performance than the dual-fuel engine (CH4 +Diesel). In terms of emission performance, as the hydrogen proportion increases, the NO emissions increase, and CO and CO2 emissions decrease. If factors such as methane escape into the atmosphere from the engine are considered, the contribution of marine tri-fuel engines to reducing ship exhaust emissions will be even more significant. Therefore, this study shows that marine hydrogen-natural gas-diesel tri-fuel engines have significant application and research prospects.

Combustion and emissions investigation on low-speed two-stroke marine diesel engine with low sulfur diesel fuel

Yang Zhiyuan, Tan Qinming, Geng Peng

Polish Maritime Research

2019

nr 1

153--161

With the implementation and expansion of international sulfur emission control areas, effectively promoted the marine low sulfur diesel fuel (MLSDF) used in marine diesel engines. In this study, a large low-speed, two-stroke, cross-head, common rail, electronic fuel injection marine diesel engine (B&W 6S35ME-B9) was used for the study. According to diesel engine’s propulsion characteristics, experiments were launched respectively at 25%, 50%, 75%, 100% load working conditions with marine low sulfur diesel fuel to analyze the fuel consumption, combustion characteristics and emissions (NOx, CO2 , CO, HC) characteristics. The results showed that: Marine diesel engine usually took fuel injection after top dead center to ensure their safety control NOx emission. From 25% to 75% load working condition, engine’s combustion timing gradually moved forward and the inflection points of pressure curve after top dead center also followed forward. While it is necessary to control pressure and reduce NOx emission by delaying fuel injection timing at 100% load. Engine’s in-cylinder pressure, temperature, and cumulative heat release were increased with load increasing. Engine’s CO2 and HC emissions were significantly reduced from 25% to 75% load, while they were increased slightly at 100% load. Moreover, the fuel consumption rate had a similar variation and the lowest was only 178 g/kW·h at 75% load of the test engine with MLSDF. HC or CO emissions at four tests’ working conditions were below 1.23 g/kW·h and the maximum difference was 0.2 or 0.4 g/kW·h respectively, which meant that combustion efficiency of the test engine with MLSDF is good. Although the proportion of NOx in exhaust gas increased with engine’s load increasing, but NOx emissions were always between 12.5 and 13.0 g/kW·h, which was less than 14.4 g/kW·h. Thus, the test engine had good emissions performance with MLSDF, which could meet current emission requirements of the International Maritime Organization.