Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Thermodynamics

2 2024

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Experimental investigations of CI engine performance using ternary blends of n-butanol/biodiesel/diesel and n-octanol/biodiesel/diesel

Singh Ashish Kumar, Pali Harveer Singh, Khan Mohammad Mohsin

Archives of Thermodynamics

2024

Vol. 45, no 1

109--118

This study explored the ternary blends of biodiesel-diesel-n-butanol and biodiesel-diesel-n-octanol on common rail direct injec-tion (CRDI) diesel engines. The compositions of fuels, which varied from 0% to 100%, were altered by up to 5%. On the basis of their properties, these blends were chosen, with various concentrations of alcohol at 5% and 10%, 5% diesel, and the remainder being biodiesel. Two ternary fuel blends of waste cooking oil biodiesel (90–85%), diesel (5%), and butanol (5–10%), namely BD90D5B5 and BD85D5B10, and subsequently, another two ternary similar blends of waste cooking oil biodiesel (90–85%), diesel (5%), and octanol (5–10%), namely BD90D5O5 and BD85D5O10, were used to conduct the experiments. The experiments were done with varying injection pressure from 17° to 29° crank angle (CA) before top dead centre (bTDC). The optimum con-dition for the blends is achieved at 26°CA bTDC for 80% loading. So, the engine trials were conducted on 26°CA bTDC to attain the results. The BD90D5O10 blend achieved the lowest brake specific fuel consumption (BSFC) reading of 0.308 kg/kWh while operating at full load. The maximum brake thermal efficiency (BTE) was 31.46% for BD90D5B5. The maximum heat release rate (HRR) achieved with BD85D5O5 fuel blend was 58.54 J/°CA. The quantity of carbon monoxide that BD85D5B10 created was the lowest (25.86 g/kWh). BD85D5B10 had a minimal unburned hydrocarbon emission of 0.157 g/kWh while operating at full load. Oxides of nitrogen (NOx) were emitted in the maximum quantity by BD85D5O10, which was equal to 6.01 g/kWh. This study establishes the viability of blends of biodiesel and alcohol as an alternative for petro-diesel in the future to meet the growing global energy demand.

Allometry of nanoparticles in diesel-biodiesel blends for CI engine performance, combustion and emissions

Ahmed Mohd Mujtaba, Pali Harveer Singh, Khan Mohammad Mohsin

Archives of Thermodynamics

2024

Vol. 45, no 1

99--108

Most countries in the world are facing two major challenges, one is the increase in the demand for energy consumption difficult to fulfill because of limited fossil fuel, and the second is the emission norms specified by many countries. Various methods are adopted to reduce emissions from engines but that leads to sacrificing the performance of CI engines. To eradicate this problem in the present study, the nanoparticles like (TiO2) are used with different particle sizes 1030 nm, 3050 nm and 5070 nm induced in B20 (20% biodiesel and 80% diesel) with the constant volume fraction of 100 ppm, and utilized in the diesel engine without any modifications. The results showed that the incorporation of TiO2 nanoparticles improves the combustion of hydrocarbons and reduces the emissions of CO, unburned hydrocarbon concentration, NOx and soot. Moreover, among three sizes of the nanoparticles, those with size 3050 nm showed interesting results with the reduction in brake-specific energy consumption, NOx, smoke and HC by 2.9%, 16.2%, 35% and 10%, respectively, compared to other blends used in the study, and hence the blend with the nanoparticle of size 3050 nm is expected to be a more promising fuel for commercial application in CI engines.