Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Foundry Engineering

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Comparison of Tensile Properties of Nb Grain Refined A206 Alloy by Gravity and Tilt Casting

Palamutcu Nuri, Dizdar Kerem Can, Sahin Hayati, Dispinar Derya

Archives of Foundry Engineering

2023

Vol. 23, iss. 4

49--53

Turbulent filling of a mould is one of the ways to introduce extrinsic defects into the cast part that could deteriorate many properties of any casting. The turbulence can be easily eliminated by counter gravity casting. In gravity casting, tapered downsprue, tapered runner is needed such that the mould cavity is filled counter-gravity from the bottom which is the only best way to eliminate turbulence during filling. Tilt casting method also exists which has the potential to quiescently transfer the liquid into the mould cavity. In this work, gravity and tilt casting methods were used to evaluate the tensile properties of Nb grain refined 206 alloy. Three different Nb contents were investigated: 0.025, 0.05 and 0.1 wt% ratios and it was found that 0.05 wt% revealed the highest tensile properties. On the other hand, when the intrusion of surface folded oxides was eliminated during filling, it was found that mechanical properties were increased significantly, and particularly, the toughness was increased by two folds when tilt casting was applied compared to gravity casting.

Mechanical Property Comparison of Al11Si Wheels Grain Refined by Ti, Nb and MTS

Aydogan F., Dizdar Kerem Can, Sahin Hayati, Mentese E., Dispinar Derya

Archives of Foundry Engineering

2022

Vol. 22, iss. 4

14--18

In this work, 25 wheels were cast with three different grain refiners: Al5Ti1B, Al3Nb1B and MTS 1582. Samples were machined from the wheels to check the mechanical properties. It was found that Nb grain refinement had the lowest grain size (260 mm) and highest tensile properties (yield strength of 119-124 MPa and ultimate tensile strength of 190-209 MPa). Al5Ti1B and MTS 1582 revealed quite similar results (110 MPa yield and 198 MPa ultimate tensile strength). The fading of the grain refining effect of Al5TiB1 master alloy was observed in both Nb and Ti added castings whereas during the investigated time interval, the fading was not observed when MTS 1582 was used.