Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 2018

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Control of the weld quality using welding parameters in a robotic welding process

Park M.-H., Jin B.-J., Yun T.-J., Son J.-S., Kim C.-G., Kim I. S.

Journal of Achievements in Materials and Manufacturing Engineering

2018

Vol. 87, nr 1

32--40

Purpose: Since the welding automations have widely been required for industries and engineering, the development of the predicted model has become more important for the increased demands for the automatic welding systems where a poor welding quality becomes apparent if the welding parameters are not controlled. The automated welding system must be modelling and controlling the changes in weld characteristics and produced the output that is in some way related to the change being detected as welding quality. To be acceptable a weld quality must be positioned accurately with respect to the joints, have good appearance with sufficient penetration and reduce low porosity and inclusion content. Design/methodology/approach: To achieve the objectives, two intelligent models involving the use of a neural network algorithm in arc welding process with the help of a numerical analysis program MATLAB have been developed. Findings: The results represented that welding quality was fully capable of quantifying and qualifying the welding faults. Research limitations/implications: Welding parameters in the arc welding process should be well established and categorized for development of the automatic welding system. Furthermore, typical characteristics of welding quality are the bead geometry, composition, microstructure and appearance. However, an intelligent algorithm that predicts the optimal bead geometry and accomplishes the desired mechanical properties of the weldment in the robotic GMA (Gas Metal Arc) welding should be required. The developed algorithm should expand a wide range of material thicknesses and be applicable in all welding position for arc welding process. Furthermore, the model must be available in the form of mathematical equations for the automatic welding system. Practical implications: The neural network models which called BP (Back Propagation) and LM (Levenberg-Marquardt) neural networks to predict optimal welding parameters on the required bead reinforcement area in lab joint in the robotic GMA welding process have been developed. Experimental results have been employed to find the optimal algorithm to predict bead reinforcement area by BP and LM neural networks in lab joint in the robotic GMA welding. The developed intelligent models can be estimated the optimal welding parameters on the desired bead reinforcement area and weld criteria, establish guidelines and criteria for the most effective joint design for the robotic arc welding process. Originality/value: In this study, intelligent models, which employed the neural network algorithms, one of AI (Artificial Intelligence) technologies have been developed to study the effects of welding parameters on bead reinforcement area and to predict the optimal bead reinforcement area for lab joint in the robotic GMA welding process. BP (Back Propagation) and LM (Levenberg-Marquardt) neural network algorithm have been used to develop the intelligent model.

A study on welding quality for the automatic vertical-position welding process based on Mahalanobis Distance method

Jin B.-J., Park M.-H., Yun T.-J., Shim J.-Y., Kang B.-Y., Kim I.-S.

Archives of Materials Science and Engineering

2018

Vol. 91, nr 1

31--40

Purpose: The welding quality and reducing production cost could be achieved by developing the automatic on-line welding quality monitoring system. However, investigation of welding fault to quantify the welding quality on the horizontal-position welding has been concentrated. Therefore, MD (Mahalanobis Distance) method on the vertical-position welding process by analysing the transform arc voltage and welding current gained from the on-line monitoring system has been applied. Design/methodology/approach: The transformed welding current and arc voltage data were taken from the experiment whereby the data number was 2500 data/s. The prediction of Contact Tip to Work Distance (CTWD) to gain best welding quality using the waveform variations were then taken from the experimental results. MD was employed to quantify the welding quality by analysing the transformed arc voltage and welding current. Finally, the optimal CTWD setting has verified the developed algorithms through additional experiments. Two kinds of experiments has been carried out by changing welding parameters artificially to verify the sensitivity and feasibility of WQ (Welding Quality) based on the concepts of MD and normal distribution. Findings: The results represented that WQ was fully capable of quantifying and qualifying the welding faults for automatic vertical-position welding process. Research limitations/implications: The arc welding process on the vertical-position compared to a horizontal-position welding is much more difficult because the metal transfer is influenced by the gravity force. To solve the problem, a new algorithm to monitor and control the welding fault during the arc welding process has been developed. Furthermore, optimization of welding parameters for the vertical-position welding process was really difficult to use the developed algorithms because they are only useful in selecting stored data and not for evaluating the effect of the variation of welding parameters on the weld ability. Practical implications: The developed algorithm could be achieved the highest welding quality at 15mm CTWD setting which the welding quality is 99.50% for the start section and 99.68% at the middle section. Originality/value: This paper proposed a new algorithm which employed the concepts of MD (Mahalanobis Distance) and normal distribution to describe a good quality welding.