Wyniki wyszukiwania - BazTech

1

Static instability of an inverted plate in channel flow: state-space representation and solution approximation

Li P., Zhang D., Cui J., Yin H., Yang Y.

Archives of Mechanics

|

2023

|

Vol. 75, nr 6

695--727

EN

Plate-like structures in channel flow are commonly found in engineering. This paper reports a theoretical study on the static aeroelastic instability of an inverted cantilevered plate in an inviscid channel flow through the state space. This study begins with the kernel function of the flow potential determined in the Fourier domain with the help of the mirror image method. Then, the instability equation is derived from the operator theory and transformed in the state space. Finally, with Glauert’s expansion, model functions, and error functions, the instability problem of such a plate has been modeled as a mathematical function approximation problem and solved by the least squares method. The derived instability equation is considered at the continuum level of description, and no approximation appears at the first equation level. The convergence and reliability of the proposed modeling and its solutions approximation are entirely tested, and it can successfully predict the instability boundary, behavior, and the channel effect. Numerical results show that the decreased channel height and asymmetric plate placement in the channel significantly decrease the critical flow velocity. The plate instability modes are close to the plate’s first natural ones and not sensitive to the channel parameters. This conclusion allows further theoretical exploration of a semi-analytical approximation of the instability boundary from the obtained instability equation. The current modeling strategy in a continuum sense may provide a new idea and essential reference for other instability problems.

2

A numerical approach in applying panel method for the added mass of a group of sections in fluids

Zhang D., Li P., Wang Q., Yang Y.

Archives of Mechanics

|

2023

|

Vol. 75, nr 1-2

151--168

EN

This paper firstly expands an efficient numerical methodology developed from the source panel method to the added mass calculation of long column systems in fluid. Structures submerged in fluid are considered as two-dimensional and are discretized into a number of source panels. The influence coefficient matrices and the potential function are then calculated and the fluid forces are calculated by the unsteady Bernoulli equation. Finally, we utilize this present method to calculate the mass coefficients of some typical problems, which effectively verifies its feasibility and accuracy. This method takes into account both applicability and computational efficiency. On the one hand, in contrast to the analytical method which is only applicable to specific cross-sections, this method is applicable to arbitrary boundaries with C0 continuity in mathematics. On the other hand, this method requires less mesh and computation than commercial software. This paper extends the application of the source panel method which is widely used in aerodynamics to provide a reference for added mass calculation problems in engineering.

3

Life prediction for LY12CZ notched plate based on the continuum damage mechanics and the genetic algorithm and radial basis function method

Gao J., Li P.

Journal of Theoretical and Applied Mechanics

|

2018

|

Vol. 56 nr 4

1109--1122

EN

In this paper, a new method based on the Continuum Damage Mechanics (CDM) and the Genetic Algorithm and Radial Basis Function neural network method (GARBF) is proposed to predict fatigue life of LY12CZ notched plate. Firstly, the multiaxial fatigue damage evolution equation is derived, and the fatigue life of the notched specimen is predicted based on the CDM method. Secondly, the RBF method is introduced to modify the relative deviation between the theoretical result and actual life. According to the drawbacks of the RBF method, the GA is adopted to optimize network parameters to effectively improve the model quality and reduce the training error. Then, the verification test indicates that the combined method of CDM and GARBF is able to reduce the average relative error of the results of fatigue life prediction to about 7%, which shows that the new method to predict the fatigue life is more reliable. At last, compared with the predicted results of the traditional Back Propagation (BP) neural network, the GARBF model proposed in this paper has a better optimization effect and the result is more stable. This research provides a feasible way to predict the fatigue lives of the notched plate based on the CDM and GARBF method.

4

Experimental investigation on effects of machining parameters on the performance of Ti-6Al-4V micro rotary parts fabricated by LS-WEDT

Sun Y., Gong Y., Cai M., Ma X., Li P.

Archives of Civil and Mechanical Engineering

|

2018

|

Vol. 18, no. 2

385--400

EN

The low speed wire electrical discharge turning (LS-WEDT) is firstly proposed to fabricate the Ti-6Al-4V micro rotary workpiece in this study. The surface quality, sub-surface damages and machining efficiency of LS-WEDT process are discussed. The single factor experiments and orthogonal experiments are respectively conducted to analyze effects of speed parameters and peak current on surface roughness (Ra), material removal rate (MRR), surface morphology and the white layer of the TC4 micro rotary workpiece machined by LS-WEDT. Experimental results indicated that the most important factors affecting the Ra and MRR in LS-WEDT respectively are the peak current and feeding speed, and the rotating speed and feeding speed have significant interactive effect on Ra and MRR. Besides, the low feeding speed can cause surface burning and the high rotating speed will elongate craters. Furthermore, the surface oxidation of TC4 workpiece machined by LS-WEDT is far more serious than the surface alloying and Ti3O and Ti6O can be detected on the machined surface. Moreover, the serrated white layer can be observed and gradually becomes continuous and thin with the decrease of peak current. Finally, large amounts of oxygen and less copper elements can be detected on the top of the white layer and longitudinal cracks.

5

Simultaneous determination of eight kinds of gingerols in zingiberis rhizome collected from different areas of China

Wang Y., Chen J., Li Y., Li P., Iqbal J., Chen Y., Ma Y., Zhang C.

Acta Chromatographica

|

2018

|

Vol. 30, no. 3

164--168

EN

A reliable and rapid high-performance liquid chromatography coupled with diode array detector method (HPLC–DAD) was established and validated to determine eight gingerol simultaneously in the rhizomes of Zingiber offcinale Rosc. The separation of eight compounds (4-hydroxy-3-methoxy-benzenebutanol,3,5-dihydroxy-1-(4-hydroxy-3-methoxyphenyl) decane, 3,5-dihydroxy-1-(3,4-dimethoxyphenyl) decane, 6-gingerol, 8-gingerol, 6-shogaol, 5-hydroxy-1-(4-hydroxy-3-methoxyphenyl)-1,4-decadien-3-one, and 10-gingerol) were performed on an Agilent TC(2) C18 (250 mm × 4.6 mm, 5 μm) at 30 °C using acetonitrile (A) and 1% formic acid aqueous solution (B) as the mobile phase with gradient elution (0–10 min, 20%–35% A; 10–28 min, 35%–55% A; 28–35 min, 55%–60% A; 35–55 min, 60%–70% A; 55.01–60 min, 100%–100% A). The detection wavelength was set at 280 nm, and the flow rate was 0.8 mL/min. Validation of the analytical method was performed by linearity, precision, and accuracy test. All compounds were quantified with good linear calibration curves (coefficient of determination R2, >0.9999). The method showed good precision with overall coefficients of variation between 0.56% and 0.84%. The range of recovery was from 95.50% to 104.14% for the analytes. This method was successfully applied to quantify eight gingerols in Z. offcinale Rosc from different regions in China, so it can provide quality assessment for this medicine.

6

A simple HPLC method for the determination of butorphanol tartrate and ondansetron hydrochloride in patient-controlled analgesia solution

Fang B., Wang L., Chen F., Li P., Shi X.

Acta Chromatographica

|

2018

|

Vol. 30, no. 1

43--46

EN

A simple and rapid high-performance liquid chromatographic (HPLC) method was established for simultaneous determination of butorphanol tartrate and ondansetron hydrochloride in analgesic mixture samples used for patient-controlled analgesia (PCA). The separation of butorphanol tartrate and ondansetron hydrochloride in PCA solution was carried out on phenomenex C18 column (4.6 mm × 150 mm, 5 μm) using 50 mM sodium acetate (pH 4.0) buffer and acetonitrile (72:28, v/v). Flow rate was 1.0 mL min−1 with a column temperature of 30 °C, and detection wavelength was carried out at 280 nm and 306 nm. Validation of the method was made in terms of specificity, linearity, accuracy, and intra- and inter-day precision, as well as quantification and detection limits. The developed method was successfully used to evaluate the chemical stability of butorphanol tartrate and ondansetron hydrochloride in analgesic mixtures at the usual concentration used for PCA.

7

Pathological Brain Detection via Wavelet Packet Tsallis Entropy and Real-Coded Biogeography-based Optimization

Wang S., Li P., Chen P., Phillips P., Liu G., Du S., Zhang Y.

Fundamenta Informaticae

|

2017

|

Vol. 151, nr 1/4

275--291

EN

(Aim) In order to detect pathological brains in a more efficient way, (Method) we proposed a novel system of pathological brain detection (PBD) that combined wavelet packet Tsallis entropy (WPTE), feedforward neural network (FNN), and real-coded biogeography-based optimization (RCBBO). (Results) The experiments showed the proposed WPTE + FNN + RCBBO approach yielded an average accuracy of 99.49% over a 255-image dataset. (Conclusions) The WPTE + FNN + RCBBO performed better than 10 state-of-the-art approaches.

8

Dynamic response of a base-isolated concrete rectangular liquid-storage structure under large amplitude sloshing

Cheng X., Li D., Li P., Zhang X., Li G.

Archives of Civil Engineering

|

2017

|

Vol. 63, nr 1

33--45

EN

Considering concrete nonlinearity, the wave height limit between small and large amplitude sloshing is defined based on the Bernoulli equation. Based on Navier-Stokes equations, the mathematical model of large amplitude sloshing is established for a Concrete Rectangle Liquid-Storage Structure (CRLSS). The results show that the seismic response of a CRLSS increases with the increase of seismic intensity. Under different seismic fortification intensities, the change in trend of wave height, wallboard displacement, and stress are the same, but the amplitudes are not. The areas of stress concentration appear mainly at the connections between the wallboards, and the connections between the wallboard and the bottom.

PL

Gdy amplituda chlupotania cieczy jest zbliżona do częstotliwości drgań struktury magazynowania substancji ciekłych (CRLSS), wówczas osiągamy rezonans i możemy zaobserwować silne zjawisko nieliniowe. Szkoda jest znacznie większa niż chlupotanie o małej amplitudzie. Obecnie brak jest odpowiedniego raportu na temat badań dynamicznej odpowiedzi struktury magazynowania substancji ciekłych z wykorzystaniem betonu izolacyjnego (CRLSS) z chlupotaniem o dużej amplitudzie, a wpływ materiałów betonowych nie jest brany pod uwagę. W związku z tym, w niniejszej pracy, w oparciu o równanie Bernoulliego, otrzymano ograniczone wysokości fali o dużej amplitudzie chlupotania oraz małej amplitudzie chlupotania. Na podstawie równań Naviera-Stokesa ustanowiono matematyczny model chlupotania o dużej amplitudzie i zbadano odpowiedź sejsmiczną CRLSS podczas chlupotania o dużej amplitudzie. Rozważając równanie Bernoulliego i zadowalający stan, chlupotanie substancji ciekłej jest liniowe, a nieliniowy kwadratowy człon jest lekceważony. W stałym i płynnym interfejsie, struktura magazynowania substancji ciekłych spełnia warunki ciągłości przemieszczania i równowagi siły oddziaływań. Właściwość mechaniczna gumowego zabezpieczenia izolacyjnego została opisana w oparciu o konstytutywną relacje modelu Mooney-Rivlin.

9

Model of eco-water driving force affecting the evolvement of runoff in the upper Minjiang River Basin

Jin H., Yang W., Li P., Ashraf M. A.

Polish Maritime Research

|

2016

|

S 1

91--96

EN

The amount of eco-water resources reflects the land surface water conservation capability, and the underlying surface condition in the hydrologic cycle. In the upper Minjiang River Basin, the amounts of eco-water resources were retrieved from remotely sensed data during 1992 to 2005. Through regression analysis between the retrieved eco-water data and the climate hydrological data mainly including the temperature, the precipitation, and the runoff in the same period, the model of eco-water driving force affecting the evolvement of runoff was established. The accuracy analysis indicates that the model can well describe the relationship between dry season runoff and its driven factors, the measured data validation proves that the model has high precision and good practicability. The eco-water remote sensing inversion provides a valid method to quantify the land surface water conservation capability, and suggests an interesting approach for the driving function quantitative researches of underlying surface factor in the hydrologic cycle.

10

Sensitive detection of acetylene by second derivative spectra with tunable diode laser absorption spectroscopy

Deng H., Sun J., Li P., Liu Y., Yu B., Li J.

Optica Applicata

|

2016

|

Vol. 46, nr 3

353--363

EN

A tunable diode laser absorption spectrometer was developed for trace acetylene gas analysis, the system performance was evaluated by combing an appropriate digital signal processing methods, i.e., Savitzky–Golay smoothing and differentiation algorithm. The calculation of the derivative spectra by this method is accompanied by simultaneous data smoothing. Based on the 2nd deriv- ative spectra detection method, the Allan variance technique indicates a C2H2 detection limit of 1.7ppm for 1-s averaging time, and a minimum noise level of 62ppb (parts per billion), at the optimum integration time of ~60s. The calculated 2nd derivative spectra with better resolution, lower detection limits, save signal processing time, and improve the ability to distinguish unresolved spectral signals.

11

An investigation of mechanical properties of recycled coarse aggregate concrete

Deng X. H., Lu Z. L., Li P., Xu T.

Archives of Civil Engineering

|

2016

|

Vol. 62, nr 4/II

19--34

EN

Recycling construction and demolition waste not only reduces project costs; and saves natural resources, but also solves the environmental threat caused by construction waste disposal. In this paper, C25 waste road concrete is used as an experimental material, the uniaxial compression strength and tensile splitting strength of C25 RAC whose coarse aggregate replacement rate is 0%, 25%, 50%, 75%, and 100% are tested under the condition that the water-to-cement ratio is 0.47, 0.55 and 0.61. The results show: (1) the uniaxial compression strength and tensile splitting strength decrease with the increase of RAC; (2) for concrete with the same water-to-cement ratio, when the coarse aggregate replacement rate changes from 0% to 50%, the uniaxial compression strength and tensile splitting strength of RAC changes slightly. When the coarse aggregate replacement rate changes from 50% to 100%, the uniaxial compression strength and tensile splitting strength of RAC decreases rapidly.

PL

Recykling odpadów budowlanych oraz materiałów pochodzących z rozbiórek nie tylko zmniejsza koszty projektu i oszczędza zasoby naturalne, ale również zażegnuje zagrożenie dla środowiska spowodowane przez składowanie odpadów budowlanych. Szczególnie w odniesieniu do właściwości mechanicznych betonu z kruszywa gruboziarnistego poddanego recyklingowi, odpady betonu drogowego C25 są używane jako materiał eksperymentalny, pod warunkiem że stosunek wody do cementu wynosi 0,47, 0,55 i 0,61 oraz są przygotowane próbki betonu o wskaźniku zamiany betonu z kruszywa gruboziarnistego poddawanego recyklingowi wynoszącym 25%, 50%, 75% i 100% betonu z naturalnego kruszywa gruboziarnistego. Próbka to sześcian o wymiarach 150 × 150 × 150 mm. Przygotowaliśmy 6 próbek dla każdego wskaźnika zamiany betonu z kruszywa gruboziarnistego poddawanego recyklingowi. Przygotowano łącznie 90 próbek betonu. Próbki zostały usunięte 24 godziny po ustawieniu oraz były utwardzane w temperaturze 20°C i wilgotności 90% przez 28 dni. Następnie przeprowadzono próby ściskania jednoosiowego oraz wytrzymałości na rozciąganie przez rozłupywanie betonu z kruszywa poddawanego recyklingowi C25.

12

Comprehensive characterization and quantification of phillyrin in the fruits of Forsythia suspensa and its medicinal preparations by liquid chromatography-ion trap mass spectrometry

Chen J., Chen Q., Yu F., Huang H., Li P., Zhu J., He X.

Acta Chromatographica

|

2016

|

Vol. 28, no. 1

145--157

EN

A rapid and sensitive method for the identification and quantification of phillyrin (POG) in Forsythia suspense is described. The phillyrin standard solution was directly infused into the ion trap mass spectrometers (IT-MS) for collecting the MSn spectra. The electrospray ionization (ESI) mass spectral fragmentation pathway of phillyrin was proposed, and the ESI-MSn fragmentation behavior of phillyrin was deduced in detail. The major product ion at m/z 355 belongs to furofuran, which was formed by loss the glucopyranoside (180 Da), and the characteristic fragment ions m/z 473, 395, 337, 309, and 249 were observed. The loss of 18 Da could arise from two different fragmentation pathways, and the observed ion was composed of a mixture of two different structural ions. Quantification of phillyrin was assigned in positive-ion mode at a product ion at m/z 557 → 355 by liquid chromatography-mass spectrometry (LC-MS). The LC-MS method was validated for linearity, sensitivity, accuracy, and precision and then used to determine the content of the phillyrin. Lastly, the LC-MS method was successfully applied to determine phillyrin in real sample F. suspense and three of its medicinal preparations in the positive mode at the first time.

13

Gas seepage equations of the coal seam under the action of moisture and the stress field

Li B., Li P., Sun D. H., Zhang L. L., Wei C. F., Borisyuk Y. A.

Journal of Power Technologies

|

2015

|

Vol. 95, nr 4

250--257

EN

A seepage experiment was conducted in relation to a loaded coal mass with various moisture content and working conditions using self-developed tri-axial gas seepage equipment. A briquette sample was used as the research object. The change in the relationship of coal mass permeability under the combined action of moisture content and effective stress was studied experimentally. The relational function was established between coal mass permeability under this combined action and the seepage equation expressing gas migration in the coal seam. The research showed the following: (1) the moisture content of coal heavily influences effective permeability, as coal mass permeability decreases in a quadratic polynomial relationship with the increase of effective stress at constant moisture content; (2) at constant moisture content in the coal mass, coal mass permeability gradually declines in a negative exponent relationship with the increase of effective stress. Moreover, coal seam gas seepage equations under the combined action of moisture and stress field were put forward based on experimental results, the law of mass conversation and Darcy’slaw.

14

Detection of multilayer cavities by employing RC-DTH air hammer system and cavity auto scanning laser system

Luo Y., Li L., Peng J., Yin K., Li P., Gan X., Zhao L., Su W.

Archives of Mining Sciences

|

2015

|

Vol. 60, no. 4

1041--1052

EN

The subterranean cavities are seriously threatened to construction and mining safety, and it’s important to obtain the exact localization and dimensions of subterranean cavities for the planning of geotechnical and mining activities. Geophysical investigation is an alternative method for cavity detection, but it usually failed for the uncertainly solution of information and data obtained by Geophysical methods. Drilling is considered as the most accurate method for cavity detection. However, the conventional drilling methods can only be used for single cavity detection, and there is no effective solution for multilayer cavities detection have been reported. In this paper, a reverse circulation (RC) down-the-hole (DTH) air hammer system with a special structured drill bit is built and a cavity auto scanning laser system based on laser range finding technique was employed to confirm the localization and dimensions of the cavities. This RC-DTH air hammer system allows drilling through the upper cavities and putting the cavity auto scanning laser system into the cavity area through the central passage of the drill tools to protect the detection system from collapsing of borehole wall. The RC-DTH air hammer system was built, and field tests were conducted in Lanxian County Iron Ore District, which is located in Lv Liang city of Shan Xi province, the northwest of china. Field tests show that employing the RC-DTH air hammer system assisted by the cavity auto scanning laser system is an efficiency method to detect multilayer cavities.

PL

Podziemne wgłębienia i pustki stanowią poważne zagrożenie dla budowli oraz dla działalności górniczej; dlatego też podstawowym zagadnieniem jest ich dokładna lokalizacja i określenie wymiarów. Jest to niezbędne dla planowania prac geotechnicznych i wydobywczych. Badania geofizyczne są alternatywną metodą wykrywania podziemnych zagłębień, zazwyczaj jednak okazują się nieskuteczne ze względu na niepewność rozwiązań oraz danych uzyskiwanych za pomocą metod geofizycznych. Wykonanie odwiertu jest najdokładniejszą metodą wykrywania zagłębień i pustek, jednakże konwencjonalne metody prowadzenia wierceń pozwalają na wykrycie jednego tylko zagłębienia, nie ma też skutecznego rozwiązania kwestii istnienia zagłębień i pustek przechodzących przez liczne warstwy górotworu. W pracy omówiono zastosowanie układu młota pneumatycznego wgłębnego z odwrotnym obiegiem płuczki, wyposażonego w odpowiednie urządzenie wiertnicze, oraz układu skanera laserowego wykorzystującego technikę dalmierza do potwierdzania lokalizacji pustek i ich wymiarów. Prezentowany młot umożliwia dokonanie odwiertu w zagłębieniach i pustkach znajdujących się w warstwach wierzchnich, następnie w zagłębieniu tym umieszczane jest laserowe urządzenie skanujące powierzchnię komory wprowadzane poprzez główny kanał w urządzeniu wiertniczym, tak by zabezpieczyć skaner na wypadek osunięcia się ścian otworu. Układ składający się z młota pneumatycznego zbudowano i przetestowano w warunkach polowych w zagłębiu miedziowym w okręgu Lanxian, w pobliżu miasta LV Liang w prowincji Shan Xi, w północno-zachodnich Chinach. Badania przeprowadzone w terenie wykazały, że zastosowanie układu złożonego z młota pneumatycznego wgłębnego RC-DTH wraz z laserowym skanerem jest skuteczną metodą wykrywania pustek przechodzących przez liczne warstwy.

15

Improved SPE-UPLC-UV-based method for the simultaneous determination of triclocarban and triclosan in wastewater

Li P., Liu X., Wang X.

Acta Chromatographica

|

2015

|

Vol. 27, no. 2

255--266

EN

Triclocarban (TCC) and triclosan (TCS) are used in a wide range of household and personal care products and have been the most frequently detected organic pollutants in both wastewater and surface water. This paper presented a rapid analytical method for simultaneous determination of TCC and TCS in wastewater. The method involves the extraction and cleanup of the target compounds by using silicon dioxide/polystyrene composite microspheres solid-phase extraction and detection with ultra-high-pressure liquid chromatography. Under the optimized conditions, the limits of detection were 0.028 μg/L and 0.040 μg/L for TCC and TCS, respectively. Under the concentrations of the spiking level ranging from 0.100 μg/L to 2.000 μg/L, the spiked recoveries of TCC and TCS in wastewater samples achieved in the range of 89.5–102.8% with RSD below 6.3% for TCC and 95.5–103.6% with RSD below 6.9% for TCS. This method was successfully used in monitoring the water samples from three traditional wastewater treatment plants.

16

Nonlinear motion law of coalbed gas seepage under the combined effects of stress field and temperature field

Li B., Wei J., Li P., Wang K., Borisyuk Y. A.

Journal of Power Technologies

|

2014

|

Vol. 94, nr 2

106--113

EN

The shrinkage and swelling of the coal matrix due to the effects of temperature were investigated through the performance by Henan Province Key Lab of Gas Geology & Gas Control of a permeability test of loaded coal under various temperature and working conditions using its own seepage equipment for thermo-fluid-solid-mechanical coupling of methane-containing coal. The variation of coal permeability under the combined effects of stress and temperature was investigated, and the gas motion law in the coal samples was tested. The variation equations of coal permeability under the combined effects of stress and temperature, as well as the motion equations describing the nonlinear gas seepage law in coal seams were established. The established equations were proved to fit well with the experimental data, which demonstrated that the motion equations and the research methods were both reasonable. Study on the seepage nonlinear motion law of gas in the coal seam is great significance to mineral gas extraction.

17

Application of struvite process for nutrient recovery from anaerobic digesters of livestock wastewater

Zhang T., Fang C., Li P., Jiang R.

Environment Protection Engineering

|

2014

|

Vol. 40, nr 3

29--42

EN

Process of struvite (Mg4NH4PO4·6H2O) precipitation is a promising method for phosphorus recycling. The use of cheap magnesium ore for precipitation struvite as phosphate recovery has been examined. The optimal conditions for precipitation are pH 9.0 and Mg2+: NH4 +: PO4 -3 molar ratio 1.1:30.7:1. Linear correlation of experimental data is in qualitative agreement with modelling calculation. Surface characterization analysis demonstrates that struvite is the dominant component of precipitate. Fertility value tests show that struvite precipitate could be available as slow-release fertilizer.

18

Phosphate recovery from animal manure wastewater by struvite crystallization and CO2 degasification reactor

Zhang T., Li P., Fang C., Jiang R.

Ecological Chemistry and Engineering. S

|

2014

|

Vol. 21, nr 1

89--99

EN

The problem of phosphorus discharge is related to environmental protection and food security. Struvite crystallization is a useful technology for phosphate recovery from wastewater. In the research, struvite crystallization process with CO2 degasification continuous U-shape reactor (CUSR) was application for phosphate recovery from animal manure wastewater. The result indicated PO43--P recovery ratio could achieve 47-53% without magnesium addition when CUSR hydraulic retention time controlled at 60 min. With extra magnesium addition, PO43--P recovery ratio could significant achieve 80-86% at magnesium addition amount 57.5 mg/dm3. PHREEQC modeling predictions trend of struvite crystallization was close to CUSR experimental results. The modeling calculation can provide a theoretical guide for operational parameters design. For seeding technology, high phosphate recovery efficiency was obtained and preformed struvite was the most effective seeding material. Surface characterization analysis demonstrated the dominant composition of chemical solids was struvite. Water extraction analysis indicated chemical solids recovery from animal manure wastewater could release PO43--P slowly and be available as slow-release fertilizer.

PL

Problem uwalniania fosforu jest związany z ochroną środowiska i bezpieczeństwem żywności. Krystalizacja struwitu jest przydatną technologią odzysku fosforanów ze ścieków. W opisanych badaniach proces krystalizacji struwitu zastosowano do odzyskiwania fosforanów z gnojowicy, do tego celu wykorzystano reaktor ciągłego odgazowywania CO2 w kształcie litery U (CUSR). Wyniki wskazują, że wskaźnik odzysku PO43- może osiągnąć 47-53% P bez dodatku magnezu, gdy kontrolowany, hydrauliczny czas retencji CUSR wynosi 60 min. Po wprowadzeniu magnezu w ilości 57,5 mg/dm3 wskaźnik odzysku PO43- może osiągnąć 80-86% P. Przewidywania modelu PHREEQC dotyczące krystalizacji struwitu był bliskie wynikom doświadczalnym CUSR. Obliczenia teoretyczne z wykorzystaniem modelu mogą stanowić wskazówkę do ustalania rzeczywistych parametrów eksploatacyjnych. Struwit otrzymany z gnojowicy może mieć zastosowanie w nasiennictwie. Analiza ekstrakcyjna wykazała, że materiał ten może powoli uwalniać PO43-P i dzięki temu znajduje zastosowanie jako nawóz.

19

SNTClus: A Novel Service Clustering Algorithm based on Network Analysis and Service Tags

Li P., Wen J., Li X.

Przegląd Elektrotechniczny

|

2013

|

R. 89, nr 1b

208--210

EN

The conventional service clustering methods are based on analysis of service functional and non-functional properties but ignore the hidden relations behind services contexts. In this paper, we propose a new service clustering algorithm SNTClus which based on heterogeneous service network analysis and service tags, after service ranking and clustering processes, services are clustered and ranked concurrently and K ranked service clusters are returned as output of clustering. The experiments show the feasibility and the accuracy of our method.

PL

W artykule zaproponowano nowy algorytm klasteryzacji usług SNTCIus, oparty na analizie heterogenicznej usług sieciowych i etykiet. W pierwszej fazie dokonuje on oceny usług i procesu klasteryzacji, po czym usługi i klastry są jednocześnie kategoryzowane. Jako wynik otrzymywane są klastry kategorii K.

20

On a system of rational difference equations ...[wzór]

Liu K., Li P., Zhong W

Fasciculi Mathematici

|

2013

|

Nr 51

105--114

EN

In this paper, we are concerned with a three- dimensional system of rational difference equations. We present solutions of the system in an explicit way and obtain the asymptotical behavior of solutions according to initial values. We also give sufficient conditions of existing four-period solutions.