Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 3

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Analysis of the features of application of vibration diagnostic methods of induction motors of transportation infrastructure using mathematical modeling

Gubarevych Oleg, Gerlici Juraj, Gorobchenko Oleksandr, Kravchenko Kateryna, Zaika Denys

Diagnostyka

2023

Vol. 24, No. 1

art. no. 2023111

In the work, studies were carried out on the use of vibration diagnostic methods for monitoring the state of induction motors with a squirrel-cage rotor, operated in electric drives of transport equipment. The most common and difficult-todiagnose damage to an induction motor is turn-to-turn short circuits in the stator winding, which require timely determination and establishment of the degree of damage to prevent an emergency shutdown of the equipment. The main purpose of the study is to establish the most effective areas of application of vibration diagnostic methods in determining the technical condition of the stator of induction motors under load. The experiments were carried out using simulation modeling for cases of turn-to-turn short circuits in one and two phases simultaneously, as well as with the influence of a low-quality supply voltage system on vibration parameters. The results of the work are relevant for further improvement of systems for diagnostic control of drives of transport equipment to increase the efficiency and reliability of their work.

Modeling and simulation of a control system of wheels of wheelset

Chudzikiewicz Andrzej, Gerlici Juraj, Sowińska Magdalena, Stelmach Anna, Wawrzyński Wojciech

Archives of Transport

2020

Vol. 55, iss. 3

73--83

Modern light rail vehicles, such as a tram or rail bus, due to the need to provide mobility for the elderly or disabled people and the requirements of operators operating passenger rail transport or transport in urban areas must have a 100% low floor. Structurally, this is associated with the use of wheelset with independently rotating wheels (IRW) in such vehicles. It is also possible to use a bogie structure without the use of a wheelset axle by mounting the wheels directly in the side parts of the bogie frame. This construction is more complex and will not be discussed in this article. Bearing in mind the dynamic behavior of such vehicles during operation (lateral stability, profile wear) in various driving conditions (curve traffic, crossovers) and taking into account operating costs, it becomes necessary to install wheel rotation control systems to maintain center movement mass of the wheelset around the centerline of the track. The subject of the article will be considerations on modeling and simulation of rail vehicle bogie motion with IRW sets including the wheel control system. Nominal and mathematical models of the analyzed vehicle will be presented, as well as a controlled strategy based on the comparison of the angular velocities of the wheels of the wheelset A review of works on solutions of such systems will be presented, and a control concept will be proposed. The summary contains conclusions regarding the possibility of practical use of the proposed method of steering wheels of a wheelset in the case of independently rotating wheels.

Estimation of sand electrification influence on locomotive wheel/ rail adhesion processes

Gorbunov Mykola, Kravchenko Kateryna, Bureika Gintautas, Gerlici Juraj, Nozhenko Olena, Vaičiūnas Gediminas, Bučinskas Vytautas, Steišūnas Stasys

Eksploatacja i Niezawodność

2019

Vol. 21, no. 3

460--467

The article describes a method of increasing the adhesion of the wheel to the rail based on the preliminary electrification of the abrasive-air mixture before its feed into a contact. A simulation model of the movement of sand in the system “injecting nozzle of a sandbox - a rail” is presented. The effectiveness of the proposed method to improve adhesion is confirmed experimentally. The results of experiments carried out on a friction machine, which characterize the change in friction ratio depending on the temperature with different methods of sand supply, are presented. The reduction in the consumption of sand caused by its electrification and the supply of a rational amount of abrasive substance into the contact of the wheel with the rail is estimated.

W artykule opisano metodę zwiększania przyczepności koła pociągu do szyny polegającą na wstępnej elektryzacji mieszaniny powietrza i substancji ściernej przed jej podaniem pod koła w punkcie styku koła z szyną. Przedstawiono symulacyjny model ruchu piasku w układzie "dysza wtryskowa piasecznicy-szyna". Skuteczność proponowanej metody poprawy przyczepności badano doświadczalnie. Przedstawiono wyniki eksperymentów przeprowadzonych na maszynie ściernej, które pokazują zmiany współczynnika tarcia w zależności od temperatury przy różnych metodach podawania piasku. Oszacowano jaki wpływ na stopień zmniejszenia zużycia piasku wywiera jego wcześniejsza elektryzacja oraz racjonalne dozowanie.