Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 7

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available Badanie wzbogacania depozytów mułów węglowych
PL
W artykule przedstawiono wyniki badań nad wzbogacaniem mułów węglowych zdeponowanych w osadnikach ziemnych. Badania przeprowadzono w skali laboratoryjnej oraz półtechnicznej. W analizie wykorzystano trzy metody: metodę wzbogacania w polu siły odśrodkowej, w hydrocyklonie klasyfikuj?co-zag?szczajacym i klasyfikatorze odśrodkowym, metodę wzbogacania strumieniowego we wzbogacalniku zwojowym typu Reichert LD4 oraz metodę fizykochemiczną- flotację. W każdej metodzie uzyskano istotnie różne efekty. Najlepsze wyniki wzbogacania uzyskano stosując metodę flotacji. Uzyskane wychody koncentratu wyniosły średnio około 64%. Wartość opałowa koncentratu wyniosła około 25 000 kJ/kg, a zawartość popiołu około 22%. W badaniach flotacyjnych stwierdzono stosunkowo wysoki poziom zawartości popiołu w odpadach. Badania wykazały także, że flotacji nie można zastosować do wszystkich badanych materiałów. Zdecydowanie mniej korzystne wyniki uzyskano wzbogacając muły w klasyfikatorze odśrodkowym i wzbogacalniku zwojowym typu Reichert LD4. Z materiału podawanego na te urządzenia wydzielono w hydrocyklonie ziarna poniżej 0,1 mm. (Średni wychód koncentratu w procesie wzbogacania wyniósł dla spirali Reicherta około 25%, a dla klasyfikatora odśrodkowego oko?o 22%. Uzyskane wartości opałowe koncentratów wyniosły odpowiednio 22 687 i 22 846 kJ/kg. Zawartość popiołu w koncentratach wyniosła około 25 i 22%. Stwierdzono również stosunkowo niską zawartość popiołu w odpadach, wyniosła ona średnio oko?o 48 i 58%. Badania wykonano w ramach projektu rozwojowego Nr N R09 0006 06/2009 pt: "Identyfikacja potencja?u energetycznego depozytów mułów węglowych w bilansie paliwowym kraju oraz strategia rozwoju technologicznego w zakresie ich wykorzystania". Projekt ten realizowany jest przez Instytut Mechanizacji Budownictwa i Górnictwa Skalnego we współpracy z Katedr? Przeróbki Kopalin i Utylizacji Odpadów Politechniki Śląskiej od sierpnia 2009 roku.
EN
This paper presents the results of slime coal beneficiation tests using coal deposited at a deposit pond. The investigation was performed on a laboratory and semi-technical scale. Three different separation methods were tested: centrifugal separation method using a hydrocyclone classifier- -separator and centrifugal separator, wet gravity separation method using a Reichert spiral separator LD4, and a physicochemical method – flotation. The applied methods revealed significant changes in yields. It was observed that the best results were obtained with flotation. The concentration yield was, on average, 64 %. The calorific value of this concentrate was estimated at 25,000 kJ/kg and ash content of 22%. In the case of flotation, high ash content was observed in waste. Nevertheless, flotation tests showed that the flotation agents used were not suitable for all tested slurries. Much less favorable results were obtained in the centrifugal separator and Reichert type LD4 spiral separator. With the material used in these types of separators, grain sizes below 0.1 mm were initially separated in hydrocyclones. Average yields observed for the Reichert spiral were 25% and for the centrifugal separator 22%. Calorific values for the concentrate were 22,687 kJ/kg and 22,846 kJ/kg respectively, and ash content 25% and 22% respectively. Low ash content was observed in tailings, amounting to approximately 48% and 58% for the Reichert spiral and centrifugal separators respectively. The research was performed under development project Nr N R09 0006 06/2009 titled: “Identification of energetic potential of coal slurries in the national fuel balance and technological development strategy of their usage”. The project has been implemented by the Institute of Mechanized Construction & Rock Mining in Warsaw in cooperation with the Department of Mineral Processing and Waste Utilization of the Silesian University of Technology since 2009.
PL
W opracowaniu przedstawiono wyniki badań wybranych właściwości fizycznych, chemicznych i energetycznych mułów węgla energetycznego i koksowego z dwudziestu depozytowych stawów osadowych. Zaprezentowane wyniki to oznaczenia składu chemicznego oraz zawartości wilgoci, części lotnych, siarki i wartości opałowej w różnych stanach. Podano też wyniki badań właściwości mułów w klasie ziarnowej poniżej 0,1 mm. Uzyskane w badaniach wyniki oznaczeń wybranych podstawowych parametrów składu chemicznego wykazały, ze muły mają skład chemiczny typowy dla odpadów drobnoziarnistych tego rodzaju. Odstępstwem od znanych z literatury wartości jest bardzo niska zawartość Al2O3 i TiO2 . Średnia wartość opałowa w stanie analitycznym w mułach zdeponowanych w poszczególnych osadnikach waha się w granicach od 9265 do 23 293 kJ/kg. Średnia zawartość popiołu w stanie analitycznym waha się w granicach od 26,98 do 63,96%, Średnia zawartość siarki całkowitej w stanie analitycznym waha się w granicach od 0,57 do 2,98%, średnia zawartość wilgoci przemijającej w odpadach mieści się w granicach od 11,69 do 34,48%, a średnia zawartość części lotnych w stanie analitycznym w odpadach zawiera się w granicach od 14,29 do 28,50%. Analiza granulometryczna mułów węglowych wykazała, że średni wychód klasy ziarnowej poniżej 0,1 mm dla wszystkich osadników wynosi 62,27%. średnia wartość opałowa w stanie analitycznym w mułach zdeponowanych w poszczególnych osadnikach w klasie ziarnowej poniżej 0,1 mm jest dość wysoka i wynosi 12 078 kJ/kg. Klasa ta charakteryzuje się wyższą zawartością popiołu i siarki. Zaprezentowane wyniki wskazują na znaczne zróznicowanie jakości mułów zdeponowanych w poszczególnych osadnikach. Badania wykonano w ramach projektu rozwojowego Nr N R09 0006 06/2009 pt: „Identyfikacja potencja3u energetycznego depozytów mułów weglowych w bilansie paliwowym kraju oraz strategia rozwoju technologicznego w zakresie ich wykorzystania”. Projekt ten realizowany jest przez Instytut Mechanizacji Budownictwa i Górnictwa Skalnego we współpracy z Katedrą Przeróbki Kopalin i Utylizacji Odpadów Politechniki Śląskiej od sierpnia 2009 roku.
EN
This paper presents the results of investigation into the physical, chemical, and energetic properties of steam and coking coal slurries deposited in twenty impoundments. The research includes a determination of chemical composition, moisture content, volatile matter, sulfur, and calorific value at various states. Additionally, the properties of coal slurry of a particle size below 0.1 mm are presented. The determination of the chemical composition revealed that it is typical for such coal tailings with the exception of very low Al2O3 and TiO2 content. The average calorific value in the analytical state of particular impoundments varies from 9,265 to 23,293 kJ/kg. The average ash content in the analytical state at impoundments varies from 26.98% to 63.96%, the average sulfur content in the analytical state varies from 0.57 to 2.98%, the average transient moisture content varies from 11.69 to 34.48%, whereas volatile matter in the analytical state ranges from 14.29 to 28.50%. The average content of the fraction below 0.1 mm for all impoundments is 62.27%. The average calorific value for the fraction below 0.1 mm is relatively high at 12,078 kJ/kg; nevertheless, this fraction has a higher ash and sulfur content. The results presented here indicate considerable variations in the quality of coal slurries deposited in different impoundments which is obvious when taking into account the differing geology of the mines’ coal deposits. At individual impoundments, these differences are smaller as demonstrated by the lower variation in the standard deviation. The research was performed under the development project Nr N R09 0006 06/2009 titled: “Identification of energetic potential of coal slurries in the national fuel balance and technological development strategy of their usage”. The project has been implemented by the Institute of Mechanized Construction & Rock Mining in Warsaw in cooperation with the Department of Mineral Processing and Waste Utilization of the Silesian University of Technology since 2009.
3
EN
The paper presents research results of the possibility to beneficiate coal slurries deposited in 21 impoundments located in the region of Silesia, Poland. Coal slurries of particle size diameter below 1 (0.5) mm were subjected to beneficiation tests with the use of the following methods: centrifugal separator, hydrocyclone, Reichert spiral separator and flotation. Applied methods showed significant differences in obtained results. The most effective method was flotation where yield was on average 64% with concentrate of high calorific value. In case of centrifugal separator and Reichert type spiral average yield was 22% and 25%, respectively. In case of hydrocyclone classifier-separator, a high yield of low quality concentrate was obtained. The study revealed that such impoundments have a high energetic potential which can be effectively used by applying a proper beneficiation technology.
PL
W artykule przedstawiono dwa przykłady wdrożenia przemysłowego metody wibrofluidalnej wykorzystanej dla pozyskiwania koncentratów węgli stosowanych w energetyce oraz niskopopiołowych dla celów specjalnych. Należy podkreślić, że przedstawione schematy i wyniki pracy instalacji przemysłowych obrazują zastosowanie tej metody opartej na konstrukcjach separatorów pierwotnej – mniej doskonałej wersji aniżeli ta, która powstała w późniejszym okresie.
EN
The article presents two examples of industrial implementation of the vibro-fluid method used for winning coal concentrates applied in the power industry and low ash concentrates for special purposes. It should be stressed that the presented schemes and results of work of industrial installations illustrate the application of this method on the basis of constructions of separators of the primary – less perfect version than this one, which arose in the later period.
5
Content available remote Analiza jakości mułów węgla kamiennego zdeponowanych w osadnikach ziemnych
PL
W artykule zostały przedstawione zagadnienia, dotyczące jakości mułów węglowych zdeponowanych na różnej głębokości w stawach osadowych. Zaprezentowano wyniki analizy jakości tych mułów dla pięciu stawów osadowych o głębokości od 4,0 do 7,6 m.
EN
The article presents issues related to quality of coal slurries deposited in various depths of impoundments. Quality assessment analysis of these slurries in five impoundments with depths of 4,0 to 7,6 m were presented.
PL
W artykule przedstawione zostały zagadnienia dotyczące drobnoziarnistych odpadów z procesu wzbogacania węgla kamiennego. Przedstawiono przykładowe wyniki badań drobnoziarnistych odpadów z trzech stawów osadowych mułów węgla energetycznego i jednego osadnika odpadów flotacyjnych węgla koksowego oraz ze zbiornika wodnego. Zaprezentowane wyniki badań pozwoliły na ocenę sposobu wykorzystania tych odpadów. W artykule przedstawiono również cel i założenia projektu rozwojowego pt.: "Identyfikacja potencjału energetycznego depozytów mułów węglowych w bilansie paliwowym kraju oraz strategia rozwoju technologicznego w zakresie ich wykorzystania" realizowanego przez Instytut Mechanizacji Budownictwa i Górnictwa Skalnego Oddział zamiejscowy :Centrum Gospodarki Odpadami" w Katowicach wraz z Katedrą Przeróbki Kopalin i Utylizacji Odpadów Politechniki Śląskiej.
EN
In the article the issues related to fine tailings produced as a result of hard coal beneficiation process are presented. The amount of waste produced as a result of coal extraction, features of fine tailings and mineralogical-petrographic composition are given. Possible methods of fine tailings usage are also presented. Results of research of fine tailings from three coal slurry impoundments of energetic coal, one flotation tailings pond of cocking coal and one water pond are shown. Presented results allow to assess the possibility of tailings usage. It was demonstrated that coal slurries from energetic coal can be used as a fuel for fluidized bed combustion. The results of research show that it is possible to reprocess flotation tailings stored for a long time in a pond using again flotation methods. It is necessary however to choose the right froth agent and its proper concentration in a process. It was also demonstrated that tailings deposited in a water pond have properties that allow their energetic usage. The purpose and assumptions of a new development project "Identification of energetic potential of coal slurries deposits in national fuel balance and strategy of technological development in the range of their usage" carried out by Institute of Mechanized Construction and Rock Mining division "Centre of Waste Disposal" in Katowice in cooperation with Department of Mineral Processing and Waste Disposal of Silesian University of Technology are presented. The purpose of a Project is to assess the possibility of including existing coal slurries deposits into national fuel balance. A project is in accordance with 2006/21/WE Directive of European Parliament and Commision regarding the management of waste from extractive industries and Act from 10th of July 2008 (Dz.U. z 2008 r. Nr 138, poz.865) regarding extractive waste that transposes Directive 2006/21/WE into Polish regulations.
PL
Przedstawiono wyniki badań odsiarczania drobno uziarnionych krajowych węgli energetycznych charakteryzujących się podwyższoną zawartością siarki. Badania oparto na trzech metodach wzbogacania grawitacyjnego - na stole koncentracyjny, w spirali Reichtera i w separatorze wibrofluidalnym.
EN
The paper presents the results of desulphurisation of polish steam coal slimes with higher content of sulphur. Investigations had been realized on three processes of the gravitational coal cleaning - Concentrating Table Reichert Spirals and Vibro-fluidizability Separator.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.