Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Physicochemical Problems of Mineral Processing

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Research on preparation and properties of porous ceramsites sintered with high-ash coal slime

Zhu Dan, Min Fanfei, Lv Wenbao

Physicochemical Problems of Mineral Processing

2023

Vol. 59, iss. 6

art. no. 172665

In order to realize the resource and harmless utilization of high-ash coal slime in coal preparation plants, porous ceramsites were prepared by the high-temperature sintering method with coal slime as raw material. The influences of sintering temperature, sintering time and ash content on the properties of porous ceramsites were studied by experiments, and the phase composition, micro-morphology and pore structure characteristics of ceramsites were analyzed by XRD, SEM and BET. The experimental results showed that with the increase of sintering temperature and sintering time, the amount of molten liquid in ceramsite green bodies increased, the densification degree of ceramsites increased gradually, the bulk density and the apparent density increased gradually, and the water absorption and the apparent porosity decreased gradually. However, with the increase of coal slime ash content, the quantity of pores within ceramsites increased first and then decreased. When the coal slime ash content was 55%, the bulk density of porous ceramsite sample was 0.549g/cm3, the water absorption rate was 64.63%, the specific surface area was 19.40m2/g, the crushing rate and wear rate were 0.14%, with rough surface, porous structure and excellent water absorption performance, which met the optimum performance requirements of porous ceramsites. At the same time, this research also provides a new idea and method for the reuse of high-ash coal slime resource, a by-product of coal washing and dressing.

Effect of ultrasonic pre-treatment on coal slime flotation

Lv Wenbao, Chen Jun, Min Fanfei, Hou Baohong, Liu Chunfu

Physicochemical Problems of Mineral Processing

2020

Vol. 56, iss. 1

173--183

Combined with the characteristics of flotation feed originating from China’s Panyidong Coal Preparation Plant, the ash, zeta potential, X-ray fluorescence spectroscopy and contact angle test were used to study changes in the surface properties of flotation feed under ultrasonic pre-treatment, and its effect on flotation of coal slime. Results show that Preferred pre-treatment process is ultrasonic secondary treatment, ultrasonic secondary pre-treatment can remove most of the high-ash fine mud for instance kaolinite, montmorillonite and quartz in the coal slurry, reduce the surface electronegativity of coal particles, and increase the contact angle of coal particles. Thus, the concentrate ash content decreases to 13%, the recovery rate, yield of flotation concentrate and combustible matter recovery reach 92.6%, 90.9% and 97.6%, respectively.