Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Effect of Cooling Rate on the Precipitation Characteristics of Cast Al-Si-Cu Alloy

Okayasu M., Sahara N., Touda M.

Archives of Foundry Engineering

2021

Vol. 21, iss. 4

55--60

The influence of the cooling rate on the extent of precipitation hardening of cast aluminum alloy (ADC12) was investigated experimentally. This study explored the cooling rate of the solidification of Cu in the α-Al phase to improve the mechanical properties of ADC12 after an aging process (Cu based precipitation hardening). The solid solution of Cu occurred in the α-Al phases during the casting process at cooling rates exceeding 0.03°C/s. This process was replaced with a solid solution process of T6 treatments. The extent of the solid solution varied depending on the cooling rate; with a higher cooling rate, a more extensive solid solution was formed. For the cast ADC12 alloy made at a high cooling rate, high precipitation hardening occurred after low-temperature heating (at 175°C for 20 h), which improved the mechanical properties of the cast Al alloys. However, the low-temperature heating at the higher temperature for a longer time decreased the hardness due to over aging.

Practical method for analysis of orthogonal plates with consideration of specific model of design diagram, boundary conditions and loading

Kipiani G., Kakhidze R., Touda M., Rekhviashvili G., Chorkhauli N.

Zeszyty Naukowe Politechniki Częstochowskiej. Budownictwo

2016

Z. 22 (172)

128-134

Is stated practical method for analysis of orthogonal plates with consideration of specific model of design diagram, boundary conditions and loading. For illustration of offered method are considered specific examples: applied in the center pinning on all four sides plate, when is constant, all four sides of plate are rigidly attached and on them is applied uniformly distributed constant loading.

W artykule przedstawiono metodę analizy ortogonalnych płyt, która ma zastosowanie praktyczne. Metoda projektowania polega na analizie schematu statycznego, warunków brzegowych i obciążeń. W celu zilustrowania metody przedstawiono przykłady obliczeniowe. Pierwszy dotyczy płyty opartej swobodnie na wszystkich czterech krawędziach, obciążonej siłą skupioną pośrodku, natomiast drugi dotyczy płyty zamocowanej sztywno oraz obciążonej obciążeniem równomiernie rozłożonym.