Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 2

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This study investigates the use of a thermopressor to achieve highly dispersed liquid atomization, with a primary focus on its application in enhancing contact cooling systems of the cyclic air for gas turbines. The use of a thermopressor results in a substantial reduction in the average droplet diameter, specifically to less than 25 μm, within the dispersed flow. Due to practically instantaneous evaporation of highly atomized liquid droplets in accelerated superheated air the pressure drop is reduced to minimum. A further increase of the air pressure takes place in diffuser. In its turn, this allows for the compensation of hydraulic pressure losses in the air path, thereby reducing compressive work. Experimental data uncover a significant decrease in the average droplet diameter, with reductions ranging from 20 to 30 µm within the thermopressor due to increased flow turbulence and intense evaporation. The minimum achievable droplet diameter is as low as 15 µm and accompanied by a notable increase in the fraction of small droplets (less than 25 µm) to 40–60%. Furthermore, the droplet distribution becomes more uniform, with the absence of large droplets exceeding 70 µm in diameter. Increasing the water flow during injection has a positive impact on the number of smaller droplets, particularly those around 25 μm, which is advantageous for contact cooling. The use of the thermopressor method for cooling cyclic air provides maximum protection to blade surfaces against drop-impact erosion, primarily due to the larger number of droplets with diameters below 25 μm. These findings underline the potential of a properly configured thermopressor to improve the efficiency of contact cooling systems in gas turbines, resulting in improved performance and reliability in power generation applications. The hydrodynamic principles explored in this study may have wide applications in marine and stationary power plants based on gas and steam turbines, gas and internal combustion engines.
EN
A study of the aerothermopressor operation for air intercooling between the stages of a multistage compressor as part of a modern gas turbine (LMS100 brand from General Electric) was carried out in the article. A calculation method has been developed using numerical modeling for the evaporation of fine water droplets in the air flow. The main characteristics of the two-phase flow at the aerothermopressor outlet have been determined. It has been found that jet apparatus provides efficient atomization of the liquid, and hence, more efficient isothermal compression process in a high-pressure compressor. The aerothermopressor applying allowed to reduce the temperature of the compressed air between the compressor stages to 50-70°C. Such a decrease in temperature under the thermo-gas-dynamic compression conditions allowed to increase the pressure at the aerothermopressor outlet up to 12-28 kPa (4-9%).
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.