Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!
  • Sesja wygasła!

Znaleziono wyników: 18

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The aim of the research was to parameterise the degree of influence of low-temperature plasma on the structure of the electromagnetic spectrum in the visible light range of a selected fluid, which, after being parameterised, will constitute a benchmark marker of the analysed interaction. The scope of the research included the generation of plasma water in a plasma generator, the intensity of which was the differentiating element. The fluid so prepared was subjected to spectral analysis. Subsequently, water of varying interaction degree was used to prepare a medium for microorganisms, the growth of which was monitored by measuring the optical density of the solution. Differences were also observed in the kinetics of microbial growth, which developed in water subjected to cold plasma interaction and in water without this interaction. The measured optical density after a 6-fold exposure and 50-hour incubation was 3.72 McF and was 1.93 McF lower than that of the reference sample (without exposure).
PL
Celem badań było sparametryzowanie stopnia wpływu plazmy niskotemperaturowej na strukturę widma elektromagnetycznego w zakresie światła widzialnego wybranej cieczy, która po sparametryzowaniu będzie stanowiła wyznacznik analizowanej interakcji. Zakres badań obejmował wytworzenie w generatorze plazmy wody, której intensywność była elementem różnicującym. Tak przygotowany płyn został poddany analizie spektralnej. Następnie woda o różnym stopniu interakcji została wykorzystana do przygotowania pożywki dla mikroorganizmów, których wzrost był monitorowany poprzez pomiar gęstości optycznej roztworu. Zaobserwowano również różnice w kinetyce wzrostu mikroorganizmów, które rozwijały się w wodzie poddanej interakcji z zimną plazmą oraz w wodzie bez tej interakcji. Zmierzona gęstość optyczna po 6-krotnym naświetlaniu i 50-godzinnej inkubacji wynosiła 3,72 McF i była o 1,93 McF niższa niż w przypadku próbki referencyjnej (bez naświetlania).
EN
Essential oils have found wide use due to their properties already observed in nature. Because of the new interest in natural products such as essential oils, despite their widespread use and familiarity as fragrances, it is important to better understand their mode of biological action for new applications in medicine, agriculture and the environment. an important goal of modern chemical physics is to gain external control over the dynamics of elementary chemical processes. Manipulating chemical transformations with external electromagnetic fields is at the heart of modular chemistry, chemical stereodynamics and quantum control of molecular dynamics. The aim of this study was to determine the degree of influence of an alternating elecromagnetic field on the structure of the electromagnetic spectrum in the visible light range of selected essential oils. The experiments conducted showed the effect of an alternating electromagnetic field on the electromagnetic spectrum of cedarwood oil. To generate significant changes in the light permeability of the suspension, for both oils, the oils must be subjected to a two-hour exposure to an electromagnetic field of 40 mT
PL
Olejki eteryczne znalazły szerokie zastosowanie ze względu na swoje właściwości zaobserwowane już w naturze. Ze względu na nowe zainteresowanie produktami naturalnymi, takimi jak olejki eteryczne, pomimo ich szerokiego zastosowania i znajomości jako substancji zapachowych, ważne jest, aby lepiej zrozumieć ich sposób działania biologicznego dla nowych zastosowań w medycynie, rolnictwie i środowisku. ważnym celem współczesnej fizyki chemicznej jest uzyskanie zewnętrznej kontroli nad dynamiką elementarnych procesów chemicznych. Manipulowanie przemianami chemicznymi za pomocą zewnętrznych pól elektromagnetycznych stanowi sedno chemii modularnej, stereodynamiki chemicznej oraz kwantowej kontroli dynamiki molekularnej. Celem badań było określenie stopnia oddziaływania zmiennego pola elekromagnetycznego na strukturę widma elektromagnetycznego w zakresie światła widzialnego wybranych olejków eterycznych. Przeprowadzone eksperymenty wykazały wpływ zmiennego pola elektromagnetycznego na widmo elektromagnetyczne olejków z drzew cedrowego. Aby wygenerować istotne zmiany przepuszczalności świetlnej zawiesiny, w przypadku obu olejków należy poddać olejki dwugodzinnej ekspozycji pola elektromagnetycznego o natężeniu 40 mT.
PL
Przetwórstwo oparte na pulsacyjnym polu elektrycznym jest techniką przyjazną dla środowiska, która może być skutecznie stosowana w wielu aplikacjach związanych z przetwarzaniem żywności, takich jak inaktywacja mikroorganizmów czy enzymów, odzyskiwanie związków bioaktywnych, odwadnianie i zamrażanie I wiele innych. Kauczuk naturalny stosowany obecnie w przemyśle pochodzi głównie z przetworzonego mleczka zawierającego lateks, wydzielanego z drzew Hevea brasiliensis, naturalnie występujących w lasach dorzecza Amazonki [3]. Kauczuk naturalny jako unikalny biopolimer o specyficznych właściwościach często nie może być zastąpiony przez alternatywne syntetyczne materiały. Celem badań było określenie wpływu oddziaływania pulsacyjnego pola elektrycznego na proces koagulacji lateksu syntetycznego. Badania zostały przeprowadzone w Laboratorium Eksperymentalnych Technik Badawczych Produktów i Surowców Biologicznych. Zbadano wpływ oddziaływania pulsacyjnego pola elektrycznego o różnych wartościach napięcia elektrycznego i różnej liczbie impulsów elektrycznych na proces koagulacji lateksu syntetycznego. Przeprowadzone badania potwierdzają że oddziaływanie pulsacyjnego pola elektrycznego powoduje proces koagulacji lateksu syntetycznego. Najlepsze efekty procesu koagulacji lateksu syntetycznego, uzyskano po zastosowaniu 400 impulsów oddziaływań PEF oraz 30 kV ustawionego napięcia. Metoda PEF okazała się dobrym zastępstwem tradycyjnej metody koagulacji.
EN
Pulsed electric field-based processing is an environmentally friendly technique that can be used effectively in many food processing applications, such as inactivation of microorganisms or enzymes, recovery of bioactive compounds, dehydration and freezing and many others. Natural rubber used in industry today is mainly derived from processed latex-containing milks secreted from Hevea brasiliensis trees, naturally found in the forests of the Amazon basin [3]. As a unique biopolymer with specific properties, natural rubber often cannot be replaced by alternative synthetic materials. The purpose of this study was to determine the effect of pulsed electric field interaction on the coagulation process of synthetic latex. The research was conducted in the Laboratory of Experimental Research Techniques of Biological Products and Raw Materials. The effect of pulsed electric field interaction with different values of electric voltage and different number of electric pulses on the coagulation process of synthetic latex was studied. The conducted research confirms that the interaction of pulsed electric field causes the coagulation process of synthetic latex. The best results of the coagulation process of synthetic latex, were obtained after the application of 400 pulses of PEF interactions and 30 kV of set voltage. The PEF method proved to be a good substitute for the traditional coagulation method.
EN
The incidence of foodborne infections has increased worldwide over the past few years, with Gram-negative and Gram-positive bacterial pathogens at the epicenter of most reported cases. The aim of this study was to determine the effect of microbial contamination, understood as the abundance of microorganisms per unit of liquid biological substance, on the photon emission rate of the aforementioned substances. Such identification will allow to parametrize the process of microbial multiplication in a given substance by the photon emission rate, which would create a fast and contact-free method of estimating the concerned abundance of microorganisms. It was found that with the increase in the abundance of microorganisms in suspension, the number of photons emitted from it increases and the trend of this increase can be described by a linear function.
PL
Częstość występowania zakażeń przenoszonych na żywność wzrosła na całym świecie w ciągu ostatnich kilku lat, a patogeny bakterii Gram-ujemnych i Gram-dodatnich znajdują się w epicentrum większości zgłaszanych przypadków. Celem badań było określenie wpływu zanieczyszczenia mikrobiologicznego rozumianego jako liczebność mikroorganizmów w jednostce płynnej substancji biologicznej na wielkość emisji fotonowej w/w substancji. Taka identyfikacja pozwoli sparametryzować proces namnażania mikroorganizmów w danej substancji stopniem emisji fotonowej, co stworzyłoby szybką i bezkontaktową metodę szacowania przedmiotowej liczebności mikroorganizmów. Stwierdzono, że wraz ze wzrostem liczebności mikroorganizmów w zawiesinie liczba emitowanych z niej fotonów rośnie a sam trend tego wzrostu można opisać funkcją liniową.
EN
The incidence of foodborne infections has increased worldwide over the past few years, with Gram-negative and Gram-positive bacterial pathogens at the epicenter of most reported cases. The aim of this study was to determine the effect of microbial contamination, understood as the abundance of microorganisms per unit of liquid biological substance, on the photon emission rate of the aforementioned substances. Such identification will allow to parametrize the process of microbial multiplication in a given substance by the photon emission rate, which would create a fast and contact-free method of estimating the concerned abundance of microorganisms. It was found that with the increase in the abundance of microorganisms in suspension, the number of photons emitted from it increases and the trend of this increase can be described by a linear function.
PL
Częstość występowania zakażeń przenoszonych na żywność wzrosła na całym świecie w ciągu ostatnich kilku lat, a patogeny bakterii Gram-ujemnych i Gram-dodatnich znajdują się w epicentrum większości zgłaszanych przypadków. Celem badań było określenie wpływu zanieczyszczenia mikrobiologicznego rozumianego jako liczebność mikroorganizmów w jednostce płynnej substancji biologicznej na wielkość emisji fotonowej w/w substancji. Taka identyfikacja pozwoli sparametryzować proces namnażania mikroorganizmów w danej substancji stopniem emisji fotonowej, co stworzyłoby szybką i bezkontaktową metodę szacowania przedmiotowej liczebności mikroorganizmów. Stwierdzono, że wraz ze wzrostem liczebności mikroorganizmów w zawiesinie liczba emitowanych z niej fotonów rośnie a sam trend tego wzrostu można opisać funkcją liniową.
EN
Currently, there is a significant increase in antibiotic resistance and associated multiresistance among microorganisms. An alternative may be the use of essential oils, which possess bactericidal properties. This paper discusses the effect of electromagnetic stimulation of a plant biologically active substance on the degree of their aseptic efficiency with respect to selected strains of Candida krusei ATCC 14243, Enterococcus faecalis ATCC 29212, Paseudomonas aeruginosa ATCC 278596 and Lactobacillus spp. It was found that the application of electromagnetic stimulation of essential oils affects their characteristics of antiseptic effect. Depending on the applied combination of 40 mT and 80 mT magnetic flux density and stimulation time, a progressive or regressive effect of the electromagnetic field was noted. In the case of 40 mT electromagnetic field irrespective of the stimulation time, a significant decrease in the antimicrobial properties of tea tree oil was noted.
PL
Obecnie odnotowywany jest znaczący wzrost antybiotykoodporności oraz związanej z nią wielooporności wśród drobnoustrojów. Alternatywą może być wykorzystanie olejków eterycznych, posiadających właściwości bakteriobójcze. W artykule omówiono wpływ stymulacji elektromagnetycznej substancji biologicznie czynnej roślin na stopień ich efektywności aseptycznej w odniesieniu do wybranych szczepów Candida krusei ATCC 14243, Enterococcus faecalis ATCC 29212, Paseudomonas aeruginosa ATCC 278596 i Lactobacillus spp. Stwierdzono, że zastosowanie stymulacji elektromagnetycznej olejków eterycznych wpływa na ich charakterystykę oddziaływania antyseptycznego. W zależności od zastosowanej kombinacji indukcji pola magnetycznego 40 mT oraz 80 mT i czasu stymulacji odnotowywano progresywne lub regresywne oddziaływanie pola elektromagnetycznego, a w przypadku oddziaływania pola elektromagnetycznego o indukcji 40 mT bez względu na czas stymulacji odnotowano znaczne zmniejszenie właściwości przeciwdrobnoustrojowych olejku z drzewa herbacianego.
EN
This paper discusses the effect of constant electric field on the geometrical parameters of selected microorganisms. In the experiment different time of exposure of suspension of microorganisms to constant electric field was applied and then the cell area and its diameter were determined. It was found that with increasing stimulation time the diameter and area of the cells relatively decreased in the case of Enterococcus faecalis strain ATCC 29212 as well as Candida krusei strain ATCC 14243. It should be noted, however, that in the case of Enterococcus faecalis ATCC 29212 cells the area and diameter of the cells after stimulation are higher than in the case of untreated cells, while in the case of Candida krusei ATCC 14243 both the area and diameter of the cells after stimulation are lower than in the cells from the control sample.
PL
W artykule omówiono wpływ oddziaływania stałego pola elektrycznego na parametry geometryczne wybranych mikroorganizmów. W doświadczeniu zastosowano zróżnicowany czas ekspozycji zawiesiny mikroorganizmów na oddziaływanie stałego pola elektrycznego a następnie określono powierzchnię komórki oraz jej średnicę. Stwierdzono, że wraz ze wzrostem czasu stymulacji średnica i pole powierzchni komórek względnie zmniejsza się zarówno w przypadku komórek szczepu Enterococcus faecalis ATCC 29212 jak również szczepu drożdżaka Candida krusei ATCC 14243. Należy jednak zaznaczyć, że w przypadku komórek Enterococcus faecalis ATCC 29212 pole powierzchni i średnica komórek po stymulacji jest wyższa niż u komórek nie poddanych takiemu oddziaływaniu, natomiast w przypadku szczepu Candida krusei ATCC 14243 zarówno pole powierzchni jak i średnica komórek po stymulacji jest niższa niż u komórek z próby kontrolnej.
PL
Przeanalizowano wpływ parametrów konstrukcyjnych (liczby zwojów cewek elektromagnesów, grubość i konduktywność osłony komory roboczej) młyna elektromagnetycznego na takie wielkości eksploatacyjne jak indukcja magnetyczna w komorze roboczej, pobierany prąd, straty na prądy wirowe, współczynnik mocy, zastępcza impedancja fazowa. Stwierdzono, że liczba zwojów cewek ma duże znaczenie, przy czym im większa liczba zwojów, tym mniejsze pole w komorze roboczej.
XX
The influence of design parameters (the number of turns of electromagnet coils, the thickness and conductivity of the working chamber enclosure) of the electromagnetic mill on such operational quantities as magnetic induction in the working chamber, current, losses due to eddy currents, power factor, equivalent phase impedance were analyzed. It was found that the number of turns of the coils is of great importance, with the larger the number of turns, the smaller the area in the working chamber.
9
Content available remote The study of electrical properties of components of a winter rape seed mixture
EN
Having conducted the investigation of electrical properties on the example of winter rape (Brassika napus oleifera diennis metzg) and its difficult-to-separate weed – cleavers (Galium aparine), we revealed a significant difference in their dielectric permittivity and the angle of dielectric loss in the wide frequency range. The revealed regularities allowed us to determine the value of the electric charge that can accumulate on the seed material in the separation process, and thus the strength of the electrical interaction between seed and separation surface.
PL
W artykule przedstawiono badania wybranych właściwości elektrycznych, które można wykorzystać do separacji nasion roślin produkcyjnych (Brassika napus oleifera diennis metzg) od nasion roślin niepożądanych (Galium aparine), których parametry geometryczne i masowe są bardzo zbliżone. Odnotowano różnice w przenikalności dielektrycznej oraz oszacowano wartość ładunku elektrycznego, który może gromadzić się w materiale.
PL
Gleba przewodzi prąd przez płynną frakcję (wodę), ciało stałe (minerały ilaste) i mieszane warstwy cząstek i roztworu glebowego. Wiele badań koncentrowało się na określeniu związku między różnymi właściwościami gleby a chwilowym przewodnictwem elektrycznym. Uzyskane wyniki są bardzo zróżnicowane, co wskazuje, że właściwości gleby w kompleksowy sposób wpływają na opór / przewodność gleby. Celem pracy było porównanie map zmienności przestrzennej przewodnictwa elektromagnetycznego i składu granulometrycznego na wybranym polu. Porównanie map przestrzennej zmienności przewodnictwa elektromagnetycznego z mapami składu granulometrycznego wykazało zgodność wyznaczonych obszarów. Aplikacja pomiarów przewodności elektrycznej gleby, przy braku informacji o składzie gleby, pozwala na określenie obszarów o zmiennych warunkach glebowych w nieinwazyjny i szybki sposób, co ma szczególne znaczenie w procesach produkcji rolnej. Uzyskane wartości EC i ER nie są bezpośrednią miarą jednej z właściwości gleby, ale najczęściej są wypadkową połączenie kilku właściwości gleby i ich wszechstronna współzależność.
EN
The soil conducts electricity through the liquid fraction (water), solid (clay minerals) and mixed layers of particles and soil solution. Many studies was focused on determining the relationship between different soil properties and instantaneous electrical conductivity. The results obtained are very diverse, which indicates that soil properties affect the resistance / conductivity of the soil in a complex way. The aim of the study was to compare the maps of the spatial diversity of electromagnetic conductivity and grain size distribution in the selected field. Comparison of maps of spatial variability of electromagnetic conductivity with particle size maps showed compliance of appointed areas. The application of measurements of soil electrical conductivity, in the absence of information on the soil grain composition, allows determination of areas with variable soil conditions in a non-invasive and fast manner, which has particular importance in agricultural production processes. The EC and ER values obtained are not a direct measure of one of the soil properties, but most often they are a resultant of a combination of several soil properties and present their comprehensive interdependence.
PL
W artykule przeanalizowano relacje pomiędzy stymulacją polem elektromagnetycznym substancji bakteryjnej. W doświadczeniu oddzielnie stymulowano bakterie Gram-dodatnie i Gram-ujemne polem elektromagnetycznym o zróżnicowanych parametrach, które wynikały z natężenia pola oraz czasu stymulacji przedmiotowych substancji. Odnotowano, że różnice w budowie oczek komórkowych stanowiących determinanty podziału bakterii na gram-dodatnie i gram-ujemne nie wpływają w sposób zróżnicowany na stymulację polem elektromagnetycznym bez względu na analizowany w doświadczeniu czas stymulacji i wielkość natężenia pola elektromagnetycznego oraz wynikającej z w/w wartości dawki ekspozycyjnej.
EN
The article analyzes the relationships between stimulation of the alternating electromagnetic field of a bacterial substance. In the experiment, Gram-positive and Gram-negative bacteria were separately stimulated by electromagnetic field of various parameters, which resulted from the field strength and stimulation time. It has been noted that differences in the structure of cells constituting determinants of bacterial division into Gram-positive and Gram-negative do not affect the stimulation of the electromagnetic field in a differentiated way. These differences have no effect regardless of the stimulation time and induction of the electromagnetic field analyzed in the experiment, as well as the exposure dose resulting from the above.
EN
The aim of the thesis was to create a web application using the information system to facilitate the creation of documentation and record management on the selected farm. In this work we focused on development of web application with support of information system AgroCont, from ISAT, s.r.o. in farm Dolný Lopašov. The ASP.NET technology was chosen for the development of the web application. In this work we described the components of the chosen technology (eg Visual Basic .NET, HTML, JavaScript, AJAX, SQL etc.) and also the steps of the life cycle of the web application creation. We have created three core modules that are focused on recording worksheets, agronomic documentation and managing individual records. Using the web application, it is possible to use these modules on all platforms anywhere (eg Android, IOS, Windows, etc.), only through a web browser and internet connection. All created records are linked to the AgroCont information system and can be further used eg. for wage creation or as a basis for in-house analyzes.
PL
Celem badań było stworzenie aplikacji internetowej z wykorzystaniem systemu informatycznego ułatwiającego tworzenie dokumentacji i zarządzanie dla przedsiębiorstwa rolnego. Aplikacja internetowa została wytworzona w technologii ASP.NET przy wsparciu systemu informatycznego AgroCont, z ISAT, s.r.o. i zastosowana w gospodarstwie Dolný Lopašov. W artykule opisano komponenty wybranej technologii (np. Visual Basic .NET, HTML, JavaScript, AJAX, SQL itp.) oraz trzy podstawowe moduły, które koncentrują się na rejestrowaniu arkuszy roboczych, dokumentacji agronomicznej i zarządzaniu poszczególnymi rekordami. Aplikacja internetowa pracuje na wszystkich platformach w dowolnym miejscu (np. Android, IOS, Windows itp.), które maja połączenie internetowe. Wszystkie utworzone rekordy są powiązane z systemem informacyjnym AgroCont i mogą być dalej wykorzystywane np. do tworzenia płac lub jako podstawa wewnętrznych analiz.
PL
Celem badań było porównanie wyników pomiarów przewodności elektrycznej wykonanej na 2 polach charakteryzujących się różnymi warunkami mikroklimatycznymi. Pole oznaczone symbolem P1 znajduje się na Nizinie Śląskiej w południowej części województwa opolskiego. Natomiast pole oznaczone symbolem P2 znajduje się u wylotu Doliny Będkowskiej w Rowie Krzeszowickim w województwie małopolskim. Odległość w linii prostej pomiędzy tymi polami wynosi 125 km. Porównanie pomiarów przewodności elektromagnetycznej na 2 polach wykazało podobną zmienność zarówno w przypadku analizy danych punktowych jak również w przypadku wykonania analiz przestrzennych. Stwierdzono istotny wpływ wilgotności gleby na rozkład zmienności zróżnicowania przestrzennego przewodności elektrycznej gleby.
EN
The aim of the research was to compare the results of electrical conductivity measurements carried out on two fields characterized by different microclimatic conditions. The field marked with P1 is located on the Silesian Lowland in the southern part of the Opole province. The field marked with the symbol P2 is located at the outlet of the Będkowska Valley in the Krzeszowicki Gulch in the Małopolska province. The distance in a straight line between these fields is 125 km. The comparison of electromagnetic conductivity measurements in two fields showed similar variability both in the case of point data analysis as well as in the case of spatial analysis. A significant effect of soil moisture on values on the distribution of variation in the spatial diversity of soil electrical conductivity was found.
PL
W artykule przedstawiono możliwości identyfikacji i parametryzacji oliwy wykorzystując zjawisko ultrasłabej luminescencji wtórnej. Badania przeprowadzono na produktach pięciu firm posiadających w swojej ofercie oliwę z oliwek, których podstawowe parametry były znane. Odnotowano różnice w liczbie emitowanych fotonów pomiędzy badanymi produktami, które pozwalają na wstępną możliwość oceny oliwy i identyfikację partii towaru, które należałoby poddać szczegółowej kontroli. Istnieje zatem możliwość wykorzystania metody ultrasłabej luminescencji wtórnej do wstępnej oceny jakości oliwy.
XX
The article presents the possibilities of olive oil identification and parameterization using the phenomenon of ultra-low secondary luminescence. The research was carried out on products of five companies offering olive oil, whose basic parameters were known. There were differences in the number of emitted photons between the tested products, which allow for the initial possibility of oil assessment and identification of batches of goods that should be subjected to detailed inspection. Therefore, it is possible to use the method of ultra-low secondary luminescence for a preliminary assessment of oil quality.
PL
Współczesne rolnictwo stawiające automatyzację i mechanizację na jednym z pierwszych miejsc wymaga rozpoznania jak największej ilości parametrów eksploatacyjnych w czasie rzeczywistym. Celem badań był pomiar oraz określenie przestrzennej zmienności podstawowych parametrów eksploatacyjnych (opór roboczy) agregatu składającego się z ciągnika i głębosza biernego. Zastosowany system pomiarowy umożliwił precyzyjne wyznaczenie podstawowych wielkości eksploatacyjnych w czasie rzeczywistym natomiast integracja z GPS pozwoliła na przestrzenną wizualizację mierzonych wielkości umiejscawiając uzyskane wartości w określonym miejscu pola.
EN
Since contemporary agricultural operations place automation and mechanization as one of the priorities, they require a sufficient knowledge of possibly largest operational parameters in real time. The purpose of research was to determine spatial variation of the basic operational parameters (working resistance) in the unit comprising a tractor and a passive subsoiler. The applied measuring system made it possible to precisely determine basic operational values in real time, while an integration with GPS allowed to provide spatial visualization of the measured parameters, placing the obtained values in particular locations of the field.
PL
W artykule przedstawiono koncepcję i realizację modyfikacji funkcjonalnej i sprzętowej stanowiska do stymulacji materii ożywionej przemiennym polem magnetycznym. Zmodyfikowane stanowisko z wieloodczepową cewką pozwoliło na stosowanie pola o częstotliwościach od 10 Hz do 100 Hz. Efekt stymulacji substancji organicznej weryfikowano stopniem emisji fotonowej tej substancji. Analiza wyników wykazała wpływ częstotliwości pola magnetycznego na wielkość i strukturę zróżnicowania emisji fotonowej w funkcji czasu w stosunku do substancji nie poddanej stymulacji.
EN
The article contains concept and resolution concern functional and hardware modification of the stand for the stimulation of organic substance by the electromagnetic field. The modified stand allowed for differentiation of the output parameters of the coil and the use of an electromagnetic field in the range from 10 Hz to 100 Hz. The level of variability in the stimulation of organic substance was verified by the level of photon emission from the substance in question. The analysis of the results showed the influence of the frequency of the electromagnetic field on changes in the size and structure of emissions as a function of time, in relation to the substance not subjected to stimulation.
PL
W artykule omówiony został problem obciążenia układu mięśniowo szkieletowego osoby realizującej proces mycia samochodu na bezobsługowej myjni samochodowej. Wykorzystując analizę poklatkową dokonano chronometrażu zmian posturalnych w czasie czynności mycia poszczególnych elementów karoserii samochodu osobowego. Stopień obciążenia układu mięśniowo szkieletowego pracownika określono metodą Ovako Working Posture Analysis System. Odnotowano, że wszystkie zidentyfikowane pozycje ciała pracownika były wymuszone a układ posturalny świadczył najczęściej o pierwszej i drugiej kategorii obciążenia generując tym samym średni poziom obciążenia statycznego.
EN
The purpose on the thesis is the analyses to determine the impact of the type of physical activity associated with the selected production process on the size and structure of the static load of the human musculoskeletal system by work. On the basis of a time-lapse analysis postural changes of employee was analyzed. The load on the musculoskeletal system of the employee was determined using the OWAS method. In all the cases of physical work analyzed, the positions of the individual elements of the body were imposed due to the character of the activities performed. The attitude of the employee's body position during the work can qualify for the first and second load categories. There is no need to make sudden changes at the workstation but it may be necessary in the future.
PL
W artykule podjęto próbę oceny ergonomicznej środowiska drganiowego wybranych środków technicznych wykorzystywanych w różnych procesach technologicznych. Zakres badań obejmował pomiar drgań ogólnych na płaszczyźnie nośnej siedziska oraz drgań miejscowych występujących na kole kierowniczym wybranych środków technicznych. Badania zostały przeprowadzone w walcu drogowym wibracyjnym. Pomiary zostały wykonane w 10 powtórzeniach dla każdego środka technicznego. Na podstawie uzyskanych pomiarów określono wartość: średnią, skuteczną, szczytową oraz wartość ważoną przyspieszenia drgań. Otrzymane wyniki zostały skonfrontowane z obowiązującymi normatywami. Odnotowano, że dzienna ekspozycja na drgania o działaniu ogólnym w przypadku pracy walca drogowego w kierunku poziomym wyniosła 1,11m⋅s-2 i przekroczyła wartości dopuszczalne dla mężczyzn i kobiet w wieku produkcyjnym. W przypadku pozostałych badanych pojazdów nie odnotowano przekroczenia wartości dopuszczalnej drgań mechanicznych w żadnym z analizowanych kierunków, zatem nie stanowiły one zagrożenia dla pracownika.
EN
The article discusses an attempt to evaluate the ergonomic vibration environment of selected technical sources used in various technological processes. The scope of the tests included measurement of general vibrations in the plane of the seat carrier and local vibrations occurring on the steering wheel of selected technical sources. The tests were carried out in two trucks and in a vibratory road roller. The measurements were carried out in 10 repetitions for each technical measure. On the basis of the obtained measurements, the mean value of vibration acceleration, effective vibration acceleration and peak vibration acceleration as well as the weighted vibration acceleration value were determined. The obtained results were confronted with the applicable standards. It was noted that the daily vibration exposure of general action in the case of road roll works in the horizontal direction was 1,11 m⋅s-2 and exceeded the limit values for men and women in the working age. In the case of other vehicles tested, there was no exceedance of the permissible mechanical vibration value in any of the analyzed directions and do not pose a threat to the employee.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.