Wyniki wyszukiwania - BazTech

1

Temporal characteristics detection and attribution analysis of hydrological time-series variation in the seagoing river of southern China under environmental change

Chen L., Wang Y., Touati B., Guan H., Leng G, Liu W., Lv S., Huang S., Pan Z.

Acta Geophysica

|

2018

|

Vol. 66, no. 5

1151--1170

EN

Environmental changes have led to a growing conflict between water supply and demand in Qinjiang River. This paper used the data of monthly rainfall, runoff, evaporation and air temperature during the period from 1956 to 2016 and combined 3-year running mean, linear regression method, Mann–Kendall test and R/S analysis method to analyze the change trend of each factor, combined Mann–Kendall test, cumulative anomaly method and slide t test to analyze the variation of each factor and combined Morlet continuous wavelet analysis to identify periodic oscillations. In this paper, the influences of climate change and human activities on the runoff of the Qinjiang River were qualitatively assessed from the aspects of trend, variation and periodicity and the contributions of climate change and human activities to runoff reduction were quantitatively assessed using evaporation difference method and an improved comparative method of the slope changing ratio of cumulative quantity (SCRCQ).The following results were obtained: (1) From 1956 to 2016, the rainfall showed a weak increasing trend, whereas the runoff depth and the evaporation exhibited significant decreasing trend and the air temperature exhibited a significant increasing trend. The rainfall and air temperature will continuously increase, whereas runoff and evaporation will continuously decrease in the future. (2) Rainfall exhibited no significant variation, whereas there were two variation points (1986 and 2003) in the runoff, three variation points (1974, 1986 and 2011) in evaporation and one variation point (1996) in air temperature. (3) Features of rainfall exhibited similarities to periodic changes in runoff, whereas rainfall exhibited significant difference with evaporation and air temperature. (4) Human activities contributed mainly to the runoff reduction. The contribution of human activities to runoff reduction increased from 43.78 to 61.17% in BR period (1983–2003) and increased from 61.17 to 72.66% in CR period (2004–2016). This indicated that the contribution of human activities to runoff reduction increased continuously. The impact of human activities on the reduction in runoff in the Qinjiang River Basin is mainly due to the irrigation, industrial and urban residents’ water use, which is caused by the growth of population and the growth of economic index.

2

Parameter Description of the Surface Metal Fiber Arrangement of Electromagnetic Shielding Fabric

Liu Z., Su Y., Pan Z., Li Y., Wang X., Zhou Z.

Fibres & Textiles in Eastern Europe

|

2017

|

Vol. 25, no. 2 (122)

62--67

EN

The influence of the surface metal fiber (SMF) arrangement on the shielding effectiveness (SE) of electromagnetic shielding fabric (EMSF) is important, but there is no reasonable description method for it at present, making the further exploration of the relationship between SMF and SE difficult. In order to scientifically describe the SMF arrangement of EMSF, this paper constructs a binary feature matrix of SMF based on a previous study of SMF region recognition. According to the feature matrix, three parameters of the exposure ratio, the discrete mean and disorder degree are proposed and the calculation equations for the three parameters given. Experiments were designed and testing samples determined to test the SE, and the exposure ratio, discrete mean and disorder degree of each sample are calculated. The relationship between the three parameters and the SE is analysed for effectiveness validation of the three parameters. Results show that the exposure ratio, discrete mean and disorder degree can describe three aspects of the SMF arrangement: the percentage content, porosity and orientation, which are positively correlated, negatively correlated and positively correlated to the SE, respectively. The research in this paper provides a basis for the study of the shielding mechanism, the transmission model, the shielding rule and the rapid non-destructive evaluation of the EMSF, and puts forward a new idea for the study of shielding theory and the application of the EMSF.

PL

Ze względu na istotny wpływ rozmieszczenia włókien metalowych (SMF) na skuteczność ekranowania (SE) tkanin osłonowych (EMSF) w pracy przedstawiono macierz binarną opartą na trzech parametrach włókien metalowych tj.: współczynniku ekspozycji, średniej wartości odległości między włóknami metalowymi i stopniu ich nieuporządkowania. Analizowano zależności pomiędzy wyżej wymienionymi parametrami a skutecznością ekranowania. Przedstawione wyniki stanowią podstawę do opracowania szybkiej i nieniszczącej metody oceny skuteczność ekranowania oraz do dalszych badań mechanizmu ekranowania.

3

Outdoor radon concentration in China

Wu Q., Pan Z., Liu S., Wang C.

Nukleonika

|

2016

|

Vol. 61, No. 3

373--378

EN

A nationwide survey was conducted in 2014 to investigate environmental outdoor radon level in 33 provincial cities across China. The radon detector used was a passive-type solid-state nuclear track detector, CR-39. Measurements were conducted under the same condition following the quality control programme. Outdoor radon concentrations in China ranged from 3 to 30.0 Bq·m−3. The annual arithmetic and geometric mean radon concentration were 14 and 13.2 Bq·m−3, respectively. The radon concentrations in the locations near or along coastline were lower than the average value, while those located in the inland area were higher. As a whole, the result showed no big difference from the data measured during the period 1983–1998. It demonstrated that the outdoor radon concentration level in China has not been changing remarkably for 20 years.

4

Lifetime Distribution and Associated Inference of Systems with Multiple Degradation Measurements Based on Gamma Processes

Pan Z., Feng J., Sun Q.

Eksploatacja i Niezawodność

|

2016

|

Vol. 18, no. 2

307--313

EN

With development of science and technology, many engineering systems take on high reliable characteristic and usually have complex structure and failure mechanisms, with their reliability being evaluated by multiple degradation measurements. In certain physical situations, the degradation of these performance characteristics would be always positive and strictly increasing. Therefore, the gamma process is usually considered as a degradation process due to its independent and non-negative increments properties. In this paper, we suppose that a system has multiple dependent performance characteristics and that their degradation can be modeled by gamma processes. For such a multivariate degradation involving three or more performance characteristics, we propose to use a multivariate Birnbaum-Saunders distribution and its marginal distributions to approximate the reliability function and give the corresponding lifetime distribution. And then, the inferential method for the model parameters is developed. Finally, for an illustration of the proposed model and method, a simulated example is discussed and some computational results are presented.

PL

Wraz z rozwojem nauki i techniki, powstaje coraz więcej systemów inżynieryjnych o wysokich parametrach niezawodnościowych, które zwykle charakteryzują się złożoną strukturą i złożonymi mechanizmami uszkodzeń. Ocena niezawodności w przypadku takich systemów wymaga pomiarów współwystępujących procesów degradacji . W pewnych sytuacjach fizycznych, degradacja właściwości użytkowych systemu będzie zawsze dodatnia oraz ściśle rosnąca. Proces degradacji jest zwykle procesem gamma, który charakteryzują niezależne i nieujemne przyrosty. W niniejszej pracy, założono, że system ma wiele zależnych charakterystyk pracy oraz że ich degradację można modelować procesem gamma. W przypadkach takiej wielowymiarowej degradacji obejmującej trzy lub więcej charakterystyk pracy zaproponowano zastosowanie rozkładu Birnbauma-Saundersa (uwzględniającego wiele zmiennych) oraz jego rozkładów brzegowych do aproksymacji funkcji niezawodności oraz określania odpowiadającego jej rozkładu czasu pracy. Opracowano metodę wnioskowania dla parametrów modelu. Wreszcie, dla zilustrowania proponowanego modelu oraz metody, omówiono przykład symulacyjny oraz przedstawiono niektóre wyniki obliczeniowe.

5

Cycle life prediction of Lithium-ion cells under complex temperature profiles

Liu T., Cheng L., Pan Z., Sun Q

Eksploatacja i Niezawodność

|

2016

|

Vol. 18, no. 1

25--31

EN

Nowadays, the extensive use of Lithium-ion cells requires an accurate life prediction model. Failure of Lithium-ion cells usually results from a gradual and irreversible capacity fading process. Experimental results show that this process is strongly affected by temperature. In engineering applications, researchers often use the regression-based approach to model the capacity fading process over cycles and then perform the cycle life prediction. However, because of neglecting temperature influences, this classic method may lead to significant prediction errors, especially when cells are subject to complex temperature profiles. In this paper, we extend the classic regression-based model by incorporating cell temperature as a predictor. Two effects of temperature on cell capacity are considered. One is the positive effect that high temperature lets a cell discharge more capacity in a cycle; The other is the negative effect that high temperature accelerates cell capacity fading. A cycle life test with six cells are conducted to valid the effectiveness of our method. Results show that the improved model is more suitable to capture the dynamics of cell capacity fading path under complex temperature profiles.

PL

Obecne szerokie zastosowanie ogniw litowo-jonowych wymaga stworzenia trafnego modelu prognozowania ich trwałości. Uszkodzenia ogniw litowo-jonowych zazwyczaj wynikają ze stopniowego i nieodwracalnego procesu utraty pojemności. Wyniki doświadczeń pokazują, że na ten proces silny wpływ wywiera temperatura. W zastosowaniach inżynieryjnych, naukowcy często wykorzystują podejście oparte na regresji do modelowania procesu utraty pojemności w poszczególnych cyklach by następnie dokonać prognozy trwałości w danym cyklu pracy. Jednakże, ta klasyczna metoda nie bierze po uwagę wpływu temperatury, co może prowadzić do znacznych błędów predykcji, w szczególności, gdy ogniwa pozostają pod wpływem złożonych profili temperaturowych. W prezentowanym artykule, rozszerzono klasyczny model oparty na regresji poprzez włączenie temperatury ogniwa jako czynnika prognostycznego. Przeanalizowano dwa rodzaje wpływu temperatury na pojemność ogniw. Z jednej strony, wysoka temperatura oddziałuje pozytywnie pozwalając ogniwu na uzyskanie większej pojemności w danym cyklu; z drugiej strony jest to wpływ negatywny, ponieważ wysoka temperatura przyspiesza utratę pojemności ogniwa. Przy użyciu sześciu ogniw, przeprowadzono badanie trwałości w danym cyklu pracy w celu potwierdzenia skuteczności naszej metody. Wyniki pokazują, że udoskonalony model pozwala lepiej uchwycić dynamikę ścieżki utraty pojemności ogniwa w warunkach złożonych profili temperaturowych.

6

Derivable maps and generalized derivations on nest and standard algebras

Pan Z.

Demonstratio Mathematica

|

2016

|

Vol. 49, nr 3

331--344

EN

For an algebra A, an A-bimodule M, and m (…) M, define a relation on A by RA(m, 0) = {(a, b) (…) A x A : amb = 0}. We show that generalized derivations on unital standard algebras on Banach spaces can be characterized precisely as derivable maps on these relations. More precisely, if A is a unital standard algebra on a Banach space X then (…)L(A,B(X)) is a generalized derivation if and only if (..) is derivable on RA(M,0), for some M (…) B(X). We give an example to show this is not the case in general for nest algebras. On the other hand, for an idempotent P in a nest algebra A = algN on a Hilbert space H such that P is either left-faithful to N or right-faithful to N﬩, if δ (…)L(A, B)H)) is derivable on RA(P, 0) then δ is a generalized derivation.