Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 6

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available remote Effect of air mass factor on the performance of different type of PV modules
EN
The paper presents the results of the outdoor performance tests made on several types of commercial PV modules. These were both single crystal and multicrystalline Si modules as well as thin-film CIS and two amorphous Si devices-single junction, marked as SJ, and triple junction, marked as TJ, respectively. Special emphasis has been put on the effects related to actual solar spectrum and meteorological parameters like air humidity and ambient temperature that may influence it. Besides short term changes that could be observed during a single day, also the results collected for more than one year of monitoring are presented. Additionally, the results of some theoretical calculations supplementing the experimental data are given. Performance of thin-film CIS module and both a-Si modules after well visible period of degradation seems to be more affected by weather and climatic conditions than the modules made of crystalline Si cells.
EN
This work has been continuation of the earlier joint research work of the University of Opole and Solar Lab in Wrocław University of Technology on the performance of commercial PV modules fabricated in different technologies, i.e. single crystal (c-Si), multicrystalline (m-Si) as well as thin film amorphous silicon (a-Si) and CIS type modules. Results of this work, showing dependence of basic characteristic module parameters on the actual values of solar irradiation and spectrum, have been presented during 17th EC PVSEC in Munich. This time data collected for the same modules during more than one year period from July 2001 till September 2002, are presented, and behaviour of all devices is analysed as a complex function of such atmospheric data as irradiation intensity and solar spectrum including the effect of air humidity, ambient temperature and water vapour contents in air. To estimate the true long-term performance of the modules some parameters such as short circuit current, current at the rated voltage (in that case equal to 12 V for all modules) and power determined at MPP (Maximum Power Point) have been integrated in time thus giving potentially available cumulative values of electrical charge and energy, respectively. To enable direct comparison of the modules that differed in their size and rated parameters data collected for each module were normalized in relations to nominal value of the appropiate parameter, i.e. either Isc or I12 or Pm, respectively. Cumulative energy generated by modules rather than power related efficiency has been used to analyse performance of the modules during different periods of the year.
PL
Praca jest kontynuacją wspólnych badań prowadzonych w Uniwersytecie Opolskim i Politechnice Wrocławskiej. Przeanalizowano pracę w różnych warunkach pogodowych w ciągu roku kalendarzowego typowych konwencjonalnych modułów fotowoltaicznych: monokrystalicznego (c-Si), multikrystalicznego (m-Si), cienkowarstwowego amorficznego (a-Si) oraz modułu typu CIS (CuInSe2). W okresie od lipca 2001 do września 2002 r. analizowano parametry modułów jako funkcję warunków atmosferycznych (nasłonecznienia, widma promieniowania słonecznego z uwzględnieniem wilgotności powietrza, temperatury otoczenia oraz modułów). W celu umożliwienia porównania modułów różniących się kształtem i mocą, parametry każdego z modułów poddawano normalizacji do jego wartości nominalnych, tzn. Isc albo I12 lub Pm. W ciągu słonecznych, letnich dni względny przyrost ładunku i uzyskiwanej energii były podobne dla wszystkich badanych modułów. Najmniej wrażliwy na warunki pogodowe i zmiany widma słonecznego okazał się moduł cienkowarstwowy CIS.
3
Content available remote Evaulation of actual PV modules performance at low insolation conditions
EN
In the paper the results of analysis of some data gathered by three independent Data Aquisition Systems, during prolonged outdoor testing of several commercial photovoltaic modules (PV modules) working in Solar Lab of Wrocław University of Technology and University of Opole, are presented and discussed. The effects of solar radiation intensity, ambient temperature, and even wind rate and direction on the actual performance of standard silicon solar cells based PV modules are shown. Special emphasis has been put on potentially cumulated electric and energy generated by the modules in different ambient conditions rather than on standard parameters measured. Effect of single-axis sun tracking is demonstrated showing that in poor insolation conditions using of such systems may be nonbeneficial.
PL
Przedstawiono analizę wyników pochodzących z trzech niezależnych systemów akwizycji danych monitorujących parametry komercyjnych modułów fotowoltaicznych (PV) w warunkach naturalnych, pracujących w laboratorium Politechniki Wrocławskiej i Uniwersytetu Opolskiego. Przedstawiono wpływ takich czynników, jak promieniowanie słoneczne, temperatura otoczenia oraz kierunek i prędkość wiatru na rzeczywiste parametry krzemowych modułów PV. Szczególny nacisk położono na wartość kumulowanego ładunku elektrycznego oraz energii generowanych przez moduły PV w warunkach różnych od STC (Standard Test Conditions). Dokonano analizy ilościowej korzyści wynikających z zastosowania systemu nadążnego w stosunku do stacjonarnego.
EN
The results of analysis of some data gathered by three independent Data Acquisition Systems during prolonged outdoor testing of several commercial photovoltaic modules (PV modules) working in Solar Lab of Wrocław University of Technology and University of Opole are presented and discussed. The effects of solar radiation intensity, ambient temperature and even wind rate and direction on the actual performance of standard silicon solar cells based PV modules are shown. The special emphasis has been put on potentially cumulated electric charge and energy generated by the modules in different ambient conditions rather than on standard parameters measured. Effect of single-axis sun-tracking is demonstrated showing that in poor insolation conditions using of such systems may be rather non beneficial.
PL
Przedstawiono założenia oraz sposób realizacji norweskiego projektu "Air Pollution Project Europe", obejmującego tereny Europy Środkowej i Północnej, a dotyczącego badań kwaśnych opadów oraz oceny poziomu stężenia dwutlenku siarki w powietrzu na podstawie obserwacji porostów. Należałoby podkreślić, że badania na szczeblu lokalnym są wykonywane przez uczniów ze szkół podstawowych. Na przykładzie gminy Jaworzyna Śląska dokonano porównania wyników badań przeprowadzonych w ramach projektu z danymi dotyczącymi zanieczyszczenia atmosfery w regionie. Przedstawiono wyniki badań kwaśnych opadów oraz wyniki z obserwacji porostów dla Europy Środkowej i Północnej przeprowadzonych w latach 1993-1997.
EN
The guidelines of the "Air Pollution Project Europe" and the way of its realisation are presented. This Norwegian project is concerned with studies of the acid rains and the evaluation of concentration level of sulphur dioxide in air on the basis of lichen observation in the Central and North Europe. The project came into being in 1993 and is carried on up till now. It is very interesting, that in the research are engaged the school children. For Jaworzyna Śląska region the results obtained during realisation of the project have been compared with the collected air pollution data. The acid rains data as well as the results of lichen observation for Central and North Europe in 1993-1997 were presented.
PL
Przedstawiono wyniki pomiarów nasłonecznienia i rzeczywistej temperatury złącza p-n ogniw krzemowych wykonanych za pomocą kalibrowanych ogniw krzemowych. Dwa identyczne ogniwa krzemowe zostały użyte jako czujniki. Wartość prądu zwarcia pochodzącego od jednego ogniwa wskazuje bezpośrednio na wartość nasłonecznienia, natomiast napięcie obwodu otwartego drugiego z nich w sposób pośredni, przy uwzględnieniu wartości nasłonecznienia określa temperaturę czujnika krzemowego. Dwa czujniki - prod. ESTI i czujnik wykonany w laboratorium Solar Lab poddane zostały badaniom, a wyniki tych badań gromadzone były poprzez system akwizycji danych i poddane porównaniu. Temperatura ogniwa krzemowego była dodatkowo sprawdzana przymocowanym do jego tylnej strony miniaturowym termorezystorem Pt100.
EN
Some results on measurement of insolation and "real" cell's temperature carried out with use of standard silicon solar cells are presented. Two identical cells are applied in such a sensor. Short circuit current of one celi is a direct indication of insolation value and open circuit voltage of the other celi is indirect indication of actual sensor's temperature but in this case more complex formuła must be used for temperature calculation. Two sensors - ESTI's and Solar Lab's - assembled in different ways have been compared. Temperature of the Si sensors was additionally measured using miniature Pt100 thermoresitors attached to the back side of the sensor paneis.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.