Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 Archives of Metallurgy and Materials

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Sortuj według:

Ogranicz wyniki do:

Synthesis of nano-structured duplex and ferritic stainless steel powders by dry milling and its comparison with wet milling

Shashanka R., Uzun Orhan, Chaira D.

Archives of Metallurgy and Materials

2020

Vol. 65, iss. 1

5--14

In the present paper, elemental Fe, Cr and Ni powders were used to fabricate nano-structured duplex and ferritic stainless steel powders by using high energy planetary ball milling. We have studied the effect of milling atmosphere like wet (toluene) and dry (argon) milling of elemental Fe-18Cr-13Ni (duplex) and Fe-17Cr-1Ni (ferritic) powders for 10 h in a dual drive planetary mill. Stearic acid of 1wt.% was added during milling to avoid agglomeration. The dry and wet milled duplex and ferritic stainless steel powders were characterized by XRD, SEM and particle size analysis techniques. We have found that both the milling atmospheres have great influence in controlling the final particle morphology, size and phase evolution during milling. It was reported that dry milling is more effective in reducing particle size than the wet milling. The Nelson-Riley method of extrapolation was used to calculate the precise lattice parameter and Williamson-Hall method was used to calculate the crystallite size and lattice strain of both the stainless steel milled in argon atmosphere. Dry milled duplex and ferritic stainless steel were then consolidated by conventional sintering method at 1100, 1200 and 1300°C temperatures under argon atmosphere for 1 hour.

Effect of Y2O3 Nanoparticles on Corrosion Study of Spark Plasma Sintered Duplex and Ferritic Stainless Steel Samples by Linear Sweep Voltammetric Method

Shashanka R., Chaira D., Kumara Swamy B. E.

Archives of Metallurgy and Materials

2018

Vol. 63, iss. 2

749--763

The microstructure and corrosion properties of spark plasma sintered yttria dispersed and yttria free duplex and ferritic stainless samples were studied. Spark plasma sintering (SPS) was carried out at 1000°C by applying 50 MPa pressure with holding time of 5 minutes. Linear sweep voltammetry (LSV) tests were employed to evaluate pitting corrosion resistance of the samples. Corrosion studies were carried out in 0.5, 1 and 2 M concentration of NaCl and H2SO4solutions at different quiet time of 2, 4, 6, 8 and 10 seconds. Yttria dispersed stainless steel samples show more resistance to corrosion than yttria free stainless steel samples. Pitting potential decreases with increase in reaction time from 2 to 10 seconds. Similarly, as concentration of NaCl and H2SO4 increases from 0.5 M to 2 M the corrosion resistance decrements due to the availability of more Cl¯ and SO42¯ ions at higher concentration.