Wyniki wyszukiwania - BazTech

1

Evaluation of pollutant emissions from a railbus in real operating conditions during transport work

Rymaniak Łukasz, Wiśniewski Sławomir, Woźniak Krystian, Frankowski Maciej

Combustion Engines

|

2023

|

R. 62, nr 3

84--88

EN

The article discusses issues related to the assessment of pollutant emissions from a railbus during transport work. The test object was a rail vehicle equipped with two diesel engines with a total power of 780 kW, Stage IIIB homologated. Measurements were carried out on the route Poznań-Wągrowiec in two directions. During the tests, the vehicle performed a transport service, where the number of passengers was counted. For the completed cycles, the average number of people was 82 and 18. Based on the obtained data, the vehicle operating conditions and emission indicators were analyzed, which were related to the number of passengers. A dimensionless toxicity index was also determined.

2

Use of toxicity indicators related to CO2 emissions in the ecological assessment of an two-wheel vehicle

Szymlet Natalia, Kamińska Michalina, Lijewski Piotr, Rymaniak Łukasz, Tutak Przemysław

Combustion Engines

|

2021

|

R. 60, nr 4

36--41

EN

The subject of the article is proposed proprietary M toxicity indicator, which is based on the assumption that CO2 emissions are a measure of the correctness of the combustion process. For this purpose, gaseous exhaust compounds such as hydrocarbons, nitrogen oxides, carbon monoxide and carbon dioxide were measured and analyzed. The test object was a motorcycle, equipped with an gasoline engine with a displacement of 0.7 dm3 and a maximum power of 55 kW. The tests were carried out using the PEMS (Portable Emissions Measurement System) AxionR/S+. The exhaust emissions measurement was done in line with the WMTC (World Motorcycles Test Cycle) certification test, dedicated to vehicles in this category. The test consists of three parts, each of them lasts 600 s and has a different maximum speed value. The test was performed on a single-roller chassis dynamometer, designed for testing two-wheeled vehicles. The toxicity indicators and rotation speed results were presented as a function of time.

3

The assessment of vehicle exhaust emissions referred to CO2 based on the investigations of city buses under actual conditions of operation

Merkisz J., Rymaniak Ł.

Eksploatacja i Niezawodność

|

2017

|

Vol. 19, no. 4

522--529

EN

The paper discusses the assessment of the exhaust emissions from heavy-duty vehicles following investigations under actual traffic conditions. The environmental characteristics presented thus far were mainly based on unit or road emissions. The paper presents an analysis of exhaust emissions referred to the harmful CO2, which was assumed as measure of correctness of the combustion process. The parameters determining this way are referred to as emission indexes. The research objects were 18-meter city buses fitted with three types of powertrains: conventional engine, hybrid (electric motor combined with a diesel engine) and a spark ignition engine fuelled with compressed natural gas (CNG). All buses were Euro V–EEV compliant. The measurements were performed according to the SORT 2 driving test procedure on the test route within the Poznan agglomeration. Investigations performed under actual traffic conditions allow a true assessment of environmental performance of a given research object because they cover a much greater engine operating parameter variability range compared to laboratory and homologation tests. The performed road tests and their analysis led to conclusions related to the applicability of the developed method of emission assessment based on emission indexes for vehicles fitted with different powertrains.

PL

W artykule przedstawiono rozważania dotyczące oceny emisji zanieczyszczeń z pojazdów ciężkich na podstawie badań realizowanych w rzeczywistych warunkach eksploatacji. Przedstawiane do tej pory charakterystyki ekologiczne silnikowych środków transportu opierały się przede wszystkim na emisji jednostkowej lub drogowej. W pracy przedstawiono analizę emisji związków toksycznych odniesioną do związku szkodliwego CO2, dla którego założono, że jest miarą poprawności realizacji procesu spalania. Wyznaczone w ten sposób parametry nazwano wskaźnikami toksyczności. Obiekty badawcze stanowiły osiemnastometrowe autobusy miejskie wyposażone w trzy rodzaje układów napędowych: konwencjonalny i hybrydowy z silnikami ZS, a także pojazd zasilany sprężonym gazem ziemnym z silnikiem ZI. Wszystkie autobusy spełniały normę Euro V–EEV. Pomiary wykonano zgodnie z procedurą testu jezdnego SORT 2 oraz na trasie badawczej w aglomeracji poznańskiej. Badania w warunkach rzeczywistej eksploatacji pozwalają dokonać rzetelnej oceny ekologiczności danego obiektu badawczego, ponieważ obejmują znacznie większy obszar zmienności parametrów pracy silników spalinowych w porównaniu z laboratoryjnymi testami homologacyjnymi. Wykonane badania drogowe i ich analiza pozwoliły na sformułowanie wniosków dotyczących słuszności stosowania opracowanej metody oceny emisji zanieczyszczeń, bazującej na wskaźnikach toksyczności, dla pojazdów wyposażonych w różne rodzaje układów napędowych.

4

Determining the environmental indicators for vehicles of different categories in relation to CO2 emission based on road tests

Merkisz J., Rymaniak Ł.

Combustion Engines

|

2017

|

R. 56, nr 3

66--72

EN

The article discusses the possibility of determining the environmental indicators for vehicles of different categories in relation to CO2 emissions. These are called toxicity indicators because they concern the compounds: CO, THC and NOx. Three Euro V compliant vehicles with different propulsion systems types were used for the study: a 0.9 dm3 urban passenger car with a SI engine and a start-stop system, a 2.5 dm3 off-road vehicle with a CI engine, and a city bus with a hybrid drive system in series configuration and a CI engine with a displacement of 6.7 dm3. Measurements were made in actual operating conditions in the Poznan agglomeration using a portable emissions measurement system (PEMS). The paper presents the characteristics of the operating time shares of vehicles and propulsion systems as well as CO2 emissions depending on the engine load and crankshaft rotational speed for individual vehicles. The determined toxicity indicators allowed to indicate their usefulness, to make comparisons between tested vehicles, and to identify directions for further work on the application and interpretation of these indicators.