Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 7

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  wodoroodchlorowanie
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available remote Application of Pd/y-Al2O3 catalyst to remove diclofenac from water
EN
Herein we investigate alumina-supported palladium catalysts' properties in water purification from diclofenac. Three different pretreatment conditions subjected Pd/y-Al2O3 catalyst prepared by incipient wetness impregnation. The resulting materials were characterized by CO chemisorption and TEM. We have shown that catalytic performance of 1 wt. % Pd/ /y-Al2O3 in hydrodechlorination of diclofenac depends on the pretreatment conditions. The highest activity has shown palladium catalyst pretreated under the mildest conditions.
PL
W niniejszej pracy zbadano właściwości katalityczne katalizatorów palladowych, osadzonych na y-tlenku glinu, w oczyszczaniu wody z diklofenaku. Katalizator Pd/y-Al2O3 przygotowany metodą suchej impregnacji i poddano trzem różnym warunkom obróbki wstępnej. Otrzymane materiały scharakteryzowano za pomocą chemisorpcji CO oraz TEM. Wykazaliśmy, że wydajność katalityczna 1 % wag. Pd/ /y-Al2O3 w wodoroodchlorowaniu diklofenaku zależy od warunków obróbki wstępnej. Największą aktywność wykazał katalizator palladowy poddany obróbce wstępnej w najłagodniejszych warunkach.
PL
Przedstawiono wpływ dodatku żelaza na aktywność i selektywność nośnikowych katalizatorów palladowych w reakcji wodoroodchlorowania 2,4-dichlorofenolu w fazie ciekłej, w temperaturze pokojowej. Katalizatory bimetaliczne Pd-Fe/SiO₂ i Pd-Fe/Al₂O₃, zawierające 5% mas. Pd i 1–20% mas. Fe charakteryzują się zarówno wysoką aktywnością, jak i selektywnością do fenolu. Pomiary chemisorpcji tlenku węgla(II) wykazały wyższą dyspersję fazy aktywnej w katalizatorach Pd-Fe/Al₂O₃, które charakteryzowały się niższą selektywnością do fenolu. Stabilność katalizatorów Pd-Fe/SiO₂ w obecności kwasów humusowych jest wyższa niż ta uzyskana dla układów bimetalicznych naniesionych na tlenek glinu. W przypadku użycia katalizatorów 5%Pd-8%Fe/Al₂O₃ i 5%Pd-20%Fe/Al₂O₃ w procesie wodoroodchlorowania 2,4-dichlorofenolu stwierdzono nieznaczne wymywanie żelaza do środowiska reakcji, w którym obecne były kwasy humusowe. Występowanie utlenionych form żelaza na powierzchni katalizatorów bimetalicznych potwierdzono technikami XRD, ToF-SIMS i TPR.
EN
SiO₂ and Al₂O₃ substrates were impregnated with PdCl₂ or Pd(NO₃)₂ and/or Fe(NO₃)₃ solns. and used for hydrodechlorination of 2,4-dichlorophenol in liq. phase at room temp. Bimetallic Pd-Fe/SiO₂ and Pd-Fe/Al₂O₃ catalysts contg. 5% by mass of Pd and 1–20% by mass of Fe showed high activity and high selectivity to PhOH. According to the CO chemisorption data, the Pd-Fe/Al₂O₃ catalysts showed a higher dispersion of active phase and lower selectivity to PhOH that the Pd-Fe/SiO₂ systems. The addn. of humic acids resulted in an increase in the stability of Pd-Fe/SiO₂ systems as compared with Pd-Fe/Al₂O₃ ones. In some cases, in the presence of humic acid, leaching of Fe to reaction mixt. was observed. Existence of the oxide forms of Fe on the surface of bimetallic systems was confirmed.
5
Content available remote Metody utylizacji odpadowych związków chloroorganicznych
PL
W niniejszym artykule przedstawiono metody i możliwości wykorzystania odpadowych związków chlorooganicznych. Omówiono takie metody jak: izomeryzacja, wodoroodchlorowanie, amonoliza oraz chloroliza. Zastosowanie tych metod pozwala na zagospodarowania związków chloroorganicznych pochodzących ze ścieków i strumieni odpadowych, powstających np. podczas produkcji chlorku winylu metodą dichloroetanową i tlenku propylenu metodą chlorohydrynową.
EN
Methods of utilization of waste chloroogranic compounds has been presented. Isomerization, dehydrochlorination, ammonolysis and chlorolysis has been described as the efficient ways to utilize the chloroorganic compounds from waste streams from the production of vinyl chloride and propylene oxide.
EN
Time-of-flight secondary ion mass spectrometry (ToF-SIMS) was used in order to obtain the information about the surface composition of Pd/ZrO2-TiO2 catalyst and to estimate the changes in the concentration of particular components on its surface during the hydrodechlorination of CCl4. The results demonstrated that the hydrodechlorination process led to the increase in the concentration of chlorine and the drop in the amount of surface accessible palladium, while the quantity of Pd-Cl bounds did not change considerably. It suggested that the presence of ZrO2 protected the surface of the studied catalyst against the formation of PdCI2.
EN
The aim of this paper was to investigate the physicochemical properties of palladium catalyst containing basic support MgO which was used in hydrodechlorination reaction with carbon tetrachloride. In order to characterize the investigated sample the catalyst was put to tests of XRD, TOF - SIMS, TG-DTA-MS and TPR(H2), measurements, activity tests were also performed. The XRD and TPR results demonstrated the presence of PdOxCly species whose decomposition takes place above 700°C. The calcination of the Pd/MgO catalyst at 700°C resulted in the transformation of PdOxCly to PdO.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.