Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 7

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  wet process phosphoric acid
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
PL
Zbadano wpływ zawartości głównych zanieczyszczeń obecnych w ekstrakcyjnym kwasie fosforowym (Fe³⁺, Al³⁺, Mg²⁺, F⁻ i SiF₆²⁻) na konwersję dwuwodzianu siarczanu(VI) wapnia do półwodzianu oraz na pokrój tworzących się kryształów. Skład fazowy produktów oraz stopień konwersji CaSO₄·2H₂O do CaSO₄·0,5H₂O określano na podstawie rentgenowskiej analizy dyfrakcyjnej. Badania prowadzono na układzie modelowym. Stwierdzono, że na konwersję CaSO₄·2H₂O do CaSO₄·0,5H₂O w roztworze kwasu fosforowego(V) w istotnym stopniu oddziaływały jedynie równocześnie obecne w roztworze jony fluoru i glinu. Niski stosunek molowy tych jonów w roztworze (<12) stabilizował fazę dwuwodzianu siarczanu(VI) wapnia hamując jego konwersję do CaSO₄·0,5H₂O.
EN
CaSO₄·2H₂O was converted to CaSO₄·0.5H₂O in aq. soln. of H₃PO₄ (P₂O₅ content 24% by mass) at 90°C for 2 h in presence of Fe³⁺, Al³⁺, Mg²⁺, F⁻ and SiF₆²⁻ ions to det. the conversion degree and habit of the crystals. The process was inhibited only in presence of F- and Al³⁺ ions at low F/Al ratio.
EN
The influence of the process temperature from 85°C to 95°C, the content of phosphates and sulphates in the wet process phosphoric acid (about 22-36 wt% P2O5 and about 2-9 wt% SO42-) and the addition of ?CaSO4ź0.5H2O crystallization nuclei (from 10% to 50% in relation to CaSO4ź2H2O) on the transformation of calcium sulphate dihydrate to hemihydrate has been determined. The wet process phosphoric acid and phosphogypsum from the industrial plant was utilized. They were produced by reacting sulphuric acid with phosphate rock (Tunisia) in the DH-process. The X-ray diffraction analysis was used to determine the phase composition and fractions of various forms of calcium sulphates in the samples and the degree of conversion of CaSO4ź2H2O to ?CaSO4ź0.5H2O and CaSO4. It was found that the transformation of CaSO4ź2H2O to ?CaSO4ź0.5H2O should be carried out in the presence of ?CaSO4ź0.5H2O crystallization nuclei as an additive (in the amount of 20% in relation to CaSO4ź2H2O), at temperatures 90š2°C, in the wet process phosphoric acid containing the sulphates and phosphates in the range of 4š1 wt% and 27š1 wt%, respectively.
PL
Kwas fosforowy(V) jest otrzymywany metodą termiczną i metodą mokrą. Współcześnie przewagę zyskała metoda ekstrakcyjna. W XXI wieku preferowanym procesem otrzymywania kwasu fosforowego(V) w stał się proces półwodzianowy. Obecnie zwiększa się również zagospodarowanie produktów odpadowych powstałych w ciągu produkcyjnym. Zwiększające się zapotrzebowanie na surowiec fosforowy skutkuje wyczerpywaniem się dostępnych źródeł fosforu. Substytutem naturalnych surowców fosforowych mogą stać się produkty termicznego przetwarzania odpadów mięsnych.
EN
Phosphoric acid can be obtained by thermal and with extraction. Today, phosphoric acid is most often obtained using the wet method. In the twenty-first century the preferred process for the preparation of phosphoric acid has become the hemihydate process. Nowadays, waste product development formed during production is increasing as well. Increasing demand for raw materials resulting in the depletion of phosphorus sources of phosphorus. Substitute for natural raw phosphate may become waste products of the thermal treatment of meat products.
PL
Kwas fosforowy jest bardzo ważnym surowcem wykorzystywanym w przemyśle chemii nieorganicznej, w szczególności do produkcji nawozów sztucznych oraz fosforanów paszowych. Obecnie najczęściej wykorzystywaną metodą produkcji kwasu fosforowego jest metoda mokra (proces dwuwodzianowy). Polega ona na działaniu kwasem siarkowym na mineralne fosforany, w wyniku czego powstaje ekstrakcyjny kwas fosforowy i fosfogips. Kwas fosforowy, który służy do przeróbki na nawozy sztuczne, nie wymaga oczyszczania, natomiast wszystkie inne zastosowania tego kwasu, szczególnie do otrzymywania fosforanów paszowych, wymagają usunięcia zanieczyszczeń kadmu, rtęci, ołowiu oraz arsenu. Zatężając ekstrakcyjny kwas fosforowy, nie tylko podnosimy stężenie tlenku fosforu(V), ale również pozbywamy się części zanieczyszczeń, pochodzących z surowców użytych przy jego produkcji. Badania prowadzono w celu uzyskania możliwie dużego stężenia kwasu fosforowego, który umożliwia wykorzystanie go do produkcji fosforanu jednowapniowego. Zatężanie kwasu fosforowego zmniejsza zawartość związków fluoru, krzemu i siarki. Badania nad zatężaniem ekstrakcyjnego kwasu fosforowego wykonano w warunkach laboratoryjnych. Wraz ze wzrostem stężenia tlenku fosforu(V) obserwowano wzrost pienienia się roztworu oraz ilości wydzielającego się gazowego tetrafluorku krzemu. Tak otrzymany zatężony kwas fosforowy wykorzystywano w eksperymentach otrzymywania fosforanu paszowego. Z badań wynika, że zastosowany kwas powinien być odpowiednio zatężony, użycie kwasu o mniejszych stężeniach sprawia, że otrzymany fosforan paszowy ma dużą wilgotność, co utrudnia dalsze wykorzystanie go w produkcji mieszanek paszowych.
EN
Phosphoric acid is a very important raw material used in inorganic chemistry, in particular for the production of chemical fertilizers and fodder phosphates. Currently most used method is the production of phosphoric acid by the wet method (dihydrate process). This would involve action on the mineral phosphates with sulfuric acid, result of this process is wet process phosphoric acid and phosphogypsum. Phosphoric acid, which is used for treatment for fertilizers does not require cleaning, and all other uses of this acid, especially to receive the feed phosphates, require the removal of pollutants to a greater or lesser extent. Condensation of wet process phosphoric acid not only increase the concentration of phosphorus oxide(V), but also disposes the part of the pollutants coming from raw materials used in its production. The study was conducted for obtaining the high concentration of phosphoric acid, which allows it to use in the manufacture of monocalcium phosphate. Condensation of the phosphoric acid reduced the content of fluorine, silicon and sulphur compounds. Studies on the condensation of the wet process phosphoric acid were performed in the laboratory. With the increase in the concentration of phosphorus oxide(V) observed an increase in the foaming solution and the quantity of gas evolved silicon tetrafluoride. The latter condensed phosphoric acid was used in the experiments for obtaining feed phosphate. The research shows that the acid used should be concentrated, the use of lower concentrations of acid, making obtained feed phosphate has received high humidity which makes it difficult to continue to use it in the production of compound feed.
PL
Przedstawiono warunki tworzenia się wysokotemperaturowej odmiany (Faza–1) tripolifosforanu sodu (Na5P3O10), otrzymanego z ekstrakcyjnego kwasu fosforowego (EKF) produkowanego z koncentratu apatytowego Kola oraz z roztworu przemysłowego (Na/P = 1,67) fosforanów sodu. Obecność jonu siarczanowego w EKF miała istotny wpływ na wysokość temperatury tworzenia się Fazy–1.
EN
Com. crude 80% H3PO4 contg. ca. 2% SO4 was desulfated with CaHPO4.2H2O (Ca/SO4 = 1) to 0.04%. A com. soln. of Na phosphates, Na/P = 1.67, was evapd. and calcined at 350, 400, 450. 500, or 550° C to prep. Na tripolyphosphate. Phases I and II were identified by x-rays. With the crude acid, impurities (esp. SO4) caused the high-temp. phase (Na5P3O10-I) to form at >500° C. With the desulfated acid, phase I appeared at 350° C with no Na5P3O10-II as an intermediate. The no-waste method caused the resulting Na5P3O10 to contain impurities in proportions identical with those in the starting acid, SO4 0.04, Fe 0.3–0.5%.
PL
Przeprowadzono statystyczną analizę odorometryczną procesu wytwarzania ekstrakcyjnego kwasu fosforowego, w którym do rozkładu surowca fosforowego zastosowano porafinacyjny kwas siarkowy z kwaśnej rafinacji benzolu koksowniczego. Wyznaczono parametry równania Webera-Fechnera opisującego zależność intensywności zapachowej od stężenia odorantu. Stwierdzono, że udział 10% mas. porafinacyjnego kwasu siarkowego w technicznym kwasie siarkowym stosowanym do rozkładu surowca fosforowego nie powoduje zwiększonej uciążliwości zapachowej.
EN
Statistical odorimetric analysis of the wet-process phosphoric acid production with the use of sulfuric acid from acidic coke benzene refining plant for phosphate rock decomposition were conducted. The parameters of Weber-Fechner equation describing intensity of smells as a function of odorant concentration were evaluated. It was observed, that 10 mass % participation of sulfuric acid from benzene refining in technical purity sulfuric acid for phosphate rock decomposition did not yield noxiousness of odors.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.