Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 7

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  water heating system
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Experimental work has been carried out to study the possibility of combining a conventional solar water collector with a hybrid device, developed previously and known as PV/T system, in order to obtain hot water with temperature above 40 °C. The effect of the combination on the productivity of hot water and the produced electricity was found. The formerly developed device, in which there was a multi-purpose solar collector, can produce hot water and electricity. It was connected to the conventional fin-tube collector in series in order to raise the product temperature to a higher level. This development was achieved for the first time as a combination between a PV/T and a conventional fin-tube collector. Instrumentation to measure temperatures, solar radiation, wind speed and flow rate was installed on the system. It was found that the water temperature was raised from 29 °C to 32 °C in the PV/T collector system and, after flowing through the conventional collector, it was raised to 50 °C and above. It was also found that the power efficiency in the case of water flow is always higher than in the case of no water flow.
PL
Udział zużycia energii w systemach ciepłej wody w całkowitym zużyciu energii w budynkach ciągle rośnie. Liczba szczegółowych badań terenowych dotyczących systemów ciepłej wody jest ograniczona w porównaniu z systemami grzewczymi i chłodniczymi. W artykule wskazano problem nadmiernych strat ciepła w przewodach cyrkulacyjnych c.w. w budynku szpitala i przychodni specjalistycznej zasilanych z sieci ciepłowniczej. W artykule zaprezentowano wyniki obliczeń mocy wymienników ciepłej wody, udziałów procentowych strat ciepła w przewodach cyrkulacyjnych oraz dokonano analizy zapotrzebowania na ciepło do celów ciepłej wody na przestrzeni dnia, miesiąca, roku oraz w przeliczeniu na powierzchnię budynku oraz liczbę pacjentów. Strata ciepła wynikająca z cyrkulacji ciepłej wody w szpitalu dla całego okresu letniego wyniosła 50,54%, natomiast w przychodni 79,04%. Największy udział strat cyrkulacyjnych w szpitalu odnotowano w soboty (65,04%), natomiast w przychodni w niedziele (90,40%). Na podstawie przeprowadzonych obliczeń wnioskować można, iż straty ciepła wynikające z konieczności podtrzymania parametrów ciepłej wody są stosunkowo duże. Uzależnione są one w dużej mierze od ilości pobieranej wody i charakteru budynku.
EN
The share of energy consumption in domestic hot water systems in the total energy consumption of buildings is still increasing. The amount of detailed field research on hot water systems is limited compared to heating and cooling systems. The article indicates the problem of excessive heat losses in the circulation lines of domestic hot water installations in the building of the hospital and specialist clinic powered by the heating network. The article presents the results of calculations of the power of hot water exchangers, percentage of heat losses in circulation pipes, and an analysis of the heat demand for domestic hot water over the course of a day, month, year and per building area and the number of patients. The heat loss resulting from the circulation of hot water in the hospital for the entire summer period was 50.54%, while in the clinic it was 79.04%. The largest share of circulation losses in hospitals was recorded on Saturdays (65.04%), and in the clinic - on Sundays (90.40%). Based on the calculations performed, it can be concluded that heat losses resulting from the need to maintain hot water parameters are relatively high. They depend largely on the amount of water consumed and the nature of the building.
3
Content available remote Selection criteria and analysis of wind turbines for DHW
EN
The article describes the method and criteria of selecting wind turbines used to heat domestic hot water (DHW). The authors describe a method of choosing turbines based on power characteristics, climatic conditions and heating demands of a building. Power characteristics are described together with power utilisation factors for turbines with a horizontal and vertical axis. Special attention has been drawn to power utilisation factor of the turbine, which depends on climatic conditions and is a better parameter of turbine selection than power characteristics.
PL
W artykule opisano sposób i kryteria doboru turbin wiatrowych służących do podgrzewania ciepłej wody użytkowej (CWU). Przedstawiono metodę doboru turbin do systemu, uwzględniającą charakterystykę mocy, warunki klimatyczne oraz potrzeby grzewcze budynku. Pokazano charakterystyki mocy i współczynniki jej wykorzystania dla turbin z poziomą i pionową osią obrotu. Zwrócono uwagę na wskaźnik wykorzystania mocy turbiny, który jest zależny od warunków klimatycznych i jest lepszym parametrem w doborze turbin niż charakterystyka mocy.
PL
Opisano możliwości wykorzystania ciepła odzyskiwanego z układu chłodzenia sprężarek powietrza do ogrzewania w zakładzie przemysłowym. Przedstawiono hydrauliczny schemat systemu odzyskiwania ciepła ze sprężarek oraz empiryczne dane eksploatacyjne (z okresu jednego roku) z zakładu przemysłowego, który ten system wdrożył. Następnie przeanalizowano potencjał odzyskiwania ciepła ze sprężarek w zakładach przetwórstwa mleczarskiego charakteryzujących się szczególnie dużym zużyciem energii elektrycznej do napędu sprężarek.
EN
The paper deals with the possibilities of utilization of the heat regained from air compressors for central heating and hot water preparation in an industrial establishment. The hydraulic schema of a system utilizing heat from air compressors is presented together with empirical data from one year of exploitation in real conditions. Further, the potentials of regaining energy from air compressor in dairy industry are investigated.
PL
Obecnie duży nacisk kładzie się na rozwój instalacji wspomaganych źródłami odnawialnymi. W Polsce, w przypadku instalacji podgrzewu wody dla małych gospodarstw jest najczęściej wykorzystywana energia słoneczna. Przyjmuje się, iż kolektory słoneczne w Polsce wytwarzają rocznie 24 PJ energii na potrzeby podgrzewania wody użytkowej. Rokrocznie ta wartość rośnie ze względu na możliwość uzyskania dofinansowania tego typu instalacji. W referacie przedstawiono sposoby wykorzystania energii słonecznej w niewielkich instalacjach c.w.u. Pokazano przykład tego typu instalacji, jak również pokazano ekonomiczne aspekty zastosowania tego typu instalacji.
EN
More and more accent in present days is considered to development of installation cooperated with renewable energy sources. In Poland, most common system to hot water production, especially in domestic sector based on solar energy. The annual energy consumption to hot water in Poland is assumed on 24 PJ and is increasing due to subsidize from European Union for such kind of installation. The method of solar system application for small hot water installation has been presented in the article. The main examples used in real condition and their economical aspects have been described.
PL
Przeanalizowano wpływ rodzaju instalacji ogrzewczej i podgrzewania wody oraz stosowanych w nich nośników energii na wartość wskaźnika zapotrzebowania na nieodnawialną energię pierwotną w budynku EP. Wykazano, że instalacje zasilane ciepłem z kogeneracji są bardziej efektywne energetycznie niż alternatywne rozwiązania techniczne, co stwarza korzystne warunki do dalszego stosowania i rozwoju tego sposobu zaopatrzenia budynków w ciepło.
EN
The effect of heating installation type and water heating system (taking into account energy carriers applied) on the value of the demand indicator for non-renewable primary energy EP in a building has been analysed. It was shown that the installations supplied with heat from cogeneration are more energy efficient than the alternative solutions, which creates favourable conditions for further use and development of this method of heat supply in buildings.
7
Content available remote Energy efficiency evaluation of a solar domestic hot-water system: a case study
EN
This paper presents the results of a simulation study of a solar domestic water heating system using the Exodus method. The simulations have been performed with three days of real weather data. Investigations of thermal conditions in the flat-plate solar collector-water-storage tank system enabled to carry out a detailed evaluation of energy efficiency of the solar installation. The influence of the flow rate of the medium in the collector cycle, of initial water temperature in the tank and of the solar irradiation for a day on the quantity of energy accumulated in this system was analyzed. The efficiency of energy accumulation in the tank at the stage of its loading and during hot-water consumption was determined.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.