Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 12

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  węglowodór
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Rocks from the Mo-1 well from the Barnówko-Mostno-Buszewo (BMB) oil and gas field have been studied aiming at constructive results for application in exploration for oil and gas. The study focuses on carbonate deposits from the Main Dolomite horizon, commonly diagenetically altered, where the pore space has been filled by dolomite and anhydrite. Standard petrological analysis was conducted, wide fluid inclusion analyses performed and geochemical character of bitumen determined. Based on microscopic fluorescence studies, three types of fluid inclusions have been distinguished in the vertical column of the well: one-phase non-fluorescent (methane), two-phase non-fluorescent (brine), and two-phase fluorescent inclusions (oil). These three types, further studied microthermometrically, display characteristics of fluid fillings present in the basin and closed as the inclusions in minerals.
EN
Process of adsorption kinetics was described in this paper, based on pseudo 1 – row model and other model similar to Langmuir isotherm. To made research of isotherm kinetics adsorption was used inorganic mineral adsorbent applied to remove hazardous substances in chemical and ecological rescue. Heat oil was used as adsorptive.
EN
Combustion of MeH/air mixts. was simulated for MeH concns. 7.6–9.5% by vol. to det. the change of mol. streams during reaction. A unidirectional flow of the reacting mixt. was examd. in the model. In addn. to convection, thermodiffusion and heat conduction were taken into account. Proportionality coeffs. were also calcd. from resp. equations.
PL
Pokazano możliwość dokładnego opisu symulacji spalania metanu w powietrzu za pomocą układu dwóch równań różniczkowych. Symulacja prowadzona była w programie Chemkin PRO przy uwzględnieniu pełnego mechanizmu reakcji GRI-Mech 3.0. W modelu rozważano jednokierunkowy przepływ mieszaniny reagującej. Obok konwekcji uwzględniona została dyfuzja (termodyfuzja) i przewodzenie ciepła. Chemkin PRO jest obecnie na rynku jednym z najbardziej profesjonalnych narzędzi do prowadzenia symulacji procesów spalania. Zaproponowany opis stanowi doskonałe uzupełnienie programu.
PL
Przedstawiono wyniki badania procesu współspalania odpadów z przemysłu spożywczego z węglem kamiennym. Do badań wykorzystano makuchy słonecznikowe, produkt uboczny z produkcji olejów roślinnych. Prace były prowadzone na stanowisku badawczym z kotłem rusztowym o mocy 14 kW. Tego rodzaju urządzenia grzewcze stosuje się w budownictwie jednorodzinnym. Celem badań była ocena wpływu składu paliwa na wielkość emisji zanieczyszczeń gazowych do atmosfery. W trakcie prac badawczych wykorzystano sześć paliw, tj. węgiel kamienny w postaci tzw. ekogroszku oraz jego mieszaniny z 5%, 10%, 15%, 20% i 25% makuchów słonecznikowych. Badania prowadzono przy stałej ilości powietrza kierowanego do komory spalania. Oceniano zawartość CO2, CO, O2, H2, NOx, SO2 oraz CxHy w spalinach powstałych po spaleniu wyżej wymienionych paliw. Na podstawie wyników badań procesu współspalania makuchów słonecznikowych z węglem kamiennym sortymentu ekogroszek stwierdzono zróżnicowany przebieg procesu spalania w zależności od składu paliwa. Zawartość CO, NOx, CO2 i H2 w spalinach rośnie ze wzrostem zawartości makuchów w paliwie, natomiast zawartość O2, SO2 i CxHy spada przy wzroście zawartości tego komponentu w mieszankach paliwowych. Poprawa jakości procesu współspalania makuchów słonecznikowych z paliwem konwencjonalnym wymaga odpowiedniego doboru składu mieszanki paliwowej i regulacji pracy kotła.
EN
The paper presents the results of the combustion of waste from the food industry with coal. Were used in the by-pro-ducts of vegetable oils so called oilcake. Work was carried out using a grate boiler with a capacity of 14 kW. The aim of the study was to evaluate the effect of fuel composition on emissions of pollutant gaseous into the atmosphere. To accomplish the research used six fuels such as coal in the form of so-called ekogroszek and mixtures of ekogroszek with 5, 10, 15, 20 and 25% sunflowers oilcake. The study was conducted on constant fuel directed to the combustion chamber. Evaluated the content of CO2, CO, O2, H2, NOx, SO2 and CxHy in exhaust gases produced by burning above-mentioned fuels. Based on results of the process of co-firing sunflower oilcake with coal assortment ekogroszek was found differential progress of process combustion depending of fuel composition. The contents of CO, NOx, CO2 and H2 in the exhaust gases increases with increasing content of the fuel oil-cake, while the content of 02, SO2 and CxHy in the exhaust gases decreases with increasing content of the fuel oil-cake. The improving quality of process co-firing of sunflower oil-cake with conventional fuel it required adequate of selection composition of fuels and control of working boiler.
5
Content available remote Application of supersonic ejectors for hydrocarbon emissions capture
EN
Supersonic ejectors capturing low-pressure leakage gas from the compressors gas seal vents and re-injecting it into the fuel gas line of the gas generator allow not only saving the gas that otherwise would be leaking to the atmosphere but also eliminate hydrocarbon emissions. There are also operational and maintenance benefits, as the supersonic ejector itself does not have moving parts and is inherently maintenance free. A prototype design was developed and tested at a pipeline compressor station. A family of three ejectors was designed to cover a range of operating conditions associated with gas turbine driven compressors in pipeline applications. These ejectors were built, installed on the specially designed panel and tested at the Dresser-Rand facility. A comparison of predicted and as-tested operating maps is discussed and conclusions are made about operating range.
PL
Badania prowadzone w ostatniej dekadzie nad otrzymywaniem tlenku tytanu(IV) modyfikowanego niemetalami, aktywnego w świetle widzialnym, uzasadniają podejmowanie prób prowadzenia fotokonwersji CO2 do związków organicznych.
EN
Source rocks of microbial-algal origin commonly occur in the Main Dolomite strata in the Gorzów Wielkopolski-Miedzychód-Lubiatów area on carbonate platform slopes and on carbonate platforms. Oil-prone type II kerogen dominates with occasional amounts of type III or type I kerogens. Hydrocarbon generation processes followed two pathways. In the first pathway, generation was a single-stage process with full generation of hydrocarbon mass in a continuous progression of organic matter transformation, in late Triassic time. In the second pathway, the generation took place in two stages. Eighty to ninety percent of hydrocarbon mass was generated from kerogen by the end of the Jurassic period and the remaining generation was completed during post-Cretaceous time. As a consequence, oil accumulated in traps at the turn of the Triassic- Jurassic periods, and gas saturation of oil accumulations took place by late Jurassic time, with the final gas generation in the Paleogene or Neogene time. Hydrocarbons migrated only a few kilometres from source rocks to reservoir rocks within the Main Dolomite strata.
PL
Przedstawiono możliwość obniżenia emisji tlenków azotu w spalinach z procesu spiekania poprzez wprowadzenie węglowodorów w postaci odpadów cukrowniczych do mieszanki spiekalniczej. Spowodowało to skrócenie czasu spiekania (wzrost wydajności o ok. 5%) i obniżenie NOx w spalinach przy dodatku 1% odpadów cukrowniczych.
EN
The possibility of reducing emission of nitrogen oxides occurring in combustion gas from the sintering process by introduction of hydrocarbons in the form of sugar wastes into the sinter mix was presented. Adding 1% ofsugar wastes resulted in reduution in sintering time (increase in efficiency by approx. 5%) and the content of NOx in combustion gas.
PL
Przedstawiono wyniki badań stosowania zużytych olejów smarowych jako ekologicznych komponentów paliw - cieczy opałowych do urządzeń grzewczych. Zdefiniowano i określono podstawowe wymagania jakościowe dla tych paliw oraz kryteria, które powinny spełniać urządzenia grzewcze zasilane cieczami opałowymi.
EN
The paper presents results of research on application of waste lubricating oils as ecological components of liquid fuels for little heating systems. Defined are essential quality requirements for this fuels and criteria to be fulfilled by heating systems fuelled with the liquid fuels.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.