Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  voltage oriented control
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This paper is aimed to describe a wind energy conversion system, including a doubly fed induction generator (DFIG), a bidirectional converter in the rotor circuit the DFIG is able to work as a generator in both sub-synchronous and super-synchronous modes. The topology of a DFIG, stator is connected direct to the grid while the rotor is connected to grid with back to back converters. The wind turbine was controlled using a maximum power point tracking with linear PI regulator. The nonlinear backstepping controller is applied to the rotor side converter (RSC) for the independently control of active and reactive powers taking into consideration the full nonlinear model of the DFIG, we don’t neglecting small stator resistor and using voltage oriented control (VOC). The grid side converter (GSC) is controlled by using the oriented voltage control strategy. Also the DC link voltage control ensures the operation of unity power factor by making the reactive power zero. The obtained results are very satisfactory for this new kind of application.
PL
Niniejsza praca ma na celu opisanie systemu konwersji energii wiatru, w sklad którego wchodzi dwustronnie zasilany generator indukcyjny (DFIG), dwukierunkowy przekształtnik w obwodzie wirnika, który DFIG moze pracować jako generator zarówno w trybie podsynchronicznym, ´ jak i nadsynchronicznym. Topologia DFIG, stojan jest podłaczony bezposrednio do sieci, podczas gdy wirnik jest podłączony do sieci za pomocą konwerterów typu back-to-back. Turbina wiatrowa była sterowana za pomocą sledzenia punktu mocy maksymalnej z liniowym regulatorem PI. Nieliniowy ´ regulator krokowy zastosowano w przekształtniku po stronie wirnika (RSC) w celu niezależnego sterowania mocą czynna i bierna, biorąc pod uwagę pełny nieliniowy model DFIG, nie zaniedbując małego rezystora stojana i stosując sterowanie zorientowane na napięcie (VOC) . Konwerter po stronie sieci (GSC) jest sterowany za pomoca zorientowanej strategii sterowania napięciem. Również regulacja napięcia obwodu posredniego zapewnia ´ pracę z jednostkowym współczynnikiem mocy poprzez zerowanie mocy biernej. Uzyskane wyniki są bardzo zadowalające dla tego nowego rodzaju aplikacji.
2
Content available remote Control for Grid Connected Small Wind Turbine System
EN
This paper presents a control of a grid connected small wind turbine (SWT) system. The chosen SWT topology consists of a synchronous machine (SM) with excitation winding, a full power back to back converter and an output filter. The control system consists of the hill search type Maximum Power Point Tracking (MPPT) algorithm and the Voltage Oriented Control (VOC). The two control algorithms are interacting over the DCvoltage controller. The proposed control requires small number of measurements that can be reduced to the electrical subsystem of SWT.
PL
W artykule przedstawiono sterowanie małą turbiną wiatrową podłączoną do sieci. System składa się z silnika synchronicznego oraz przekształtnika i filtru wyjściowego. Do sterowania wykorzystano algorytm MPPT i układ VOC.
PL
W artykule opisano proces regulacji składowej ix wektora prądu sieci (proporcjonalnej do mocy czynnej) w stanie dynamicznym. Przedstawiono możliwości kształtowania prądu w stanie przejściowym przez przekształtnik AC/DC. Porównania dokonano dla dwóch algorytmów wektorowej regulacji mocy czynnej i biernej (VOC-PWM, sterowanie predykcyjne). Kryterium oceny był czas trwania stanu przejściowego oraz możliwość niezależnej regulacji składowych wektora prądu sieci ix, iy.
EN
In this paper the control process of ix component of the grid current (proportional to the active power) in a dynamic state was presented. The possibilities of shaping current in dynamic state were presented. Comparisons were made for different vector control active and reactive power. The evaluation criterion was the duration of the transition state, and the ability to independently adjust the vector components of the line current ix, iy.
4
Content available remote Control of PWM rectifier under grid voltage dips
EN
This paper investigates control structure for grid connected three-phase two-level Voltage Source Converter (VSC) under distorted grid voltage conditions. Grid voltage is distorted by balanced and unbalanced voltage dips and higher harmonics. To address the problem, the control structure of converter is presented. The control system is a modification of Voltage Oriented Control (VOC) based on Dual Vector Current Controllers (DVCC). Grid synchronization under distorted voltage is achieved by employing Phase Locked Loop (PLL). Simulation and experimental results, which illustrate properties of proposed system, are presented.
5
Content available remote High-performance decoupled control of PWM rectifier with load compensation
EN
The paper presents the decoupled vector control of the PWM rectifier with the nonlinear DC-link voltage regulation and the load compensating feedforward. The concept of the proposed control system is based on Voltage Oriented Control with Space-Vector Pulse Width Modulation (SV-PWM). For the high-performance operation of the PWM rectifier and the satisfactory current tracing the decoupled current control has been introduced. The performance of the linear PI controller of the DC-link voltage is strictly dependent on its settings and it may introduce a disadvantageous voltage overshoot under a heavy load impact. In order to improve the transient response of the DC-link voltage control loop a load compensation has been proposed. The different approach to the control of the DC-link voltage based on the regulation of the square power of the DC voltage has been introduced. The algorithm of the proposed nonlinear control system of the PWM rectifier has been implemented on a fixed-point 150MHz DSP evaluation board of an experimental setup with a power converter. The selected experimental results have been presented and discussed.
PL
Artykuł prezentuje odsprzężone sterowanie wektorowe prostownikiem PWM z nieliniową regulacji napięcia stałego obwodu pośredniczącego i sprzężeniem wyprzedzającym od prądu obciążenia przekształtnika. W celu polepszenia właściwości dynamicznych układu sterowania prostownikiem PWI^ wprowadzono odsprzężenia prądów sieci w prostokątnym układzie współrzędnych, zsynchronizowanymi z wektorem napięcia sieci. Aby poprawić dynamiczną odpowiedź liniowego regulatora napięcia stałego przekształtnika wprowadzono sprzężenie wyprzedzające od prądu obciążenia. Ponadto przedstawiono metodę linearyzacji dynamiki działania pętli sterowania napięciem stałym poprzez regulację drugi potęgi napięcia stałego. Algorytm przedstawionej metody został zaimplementowany w układzie eksperymentalnym prostownika PWM opartym na stałoprzecinkowym procesorze sygnałowym sterującym mi dułem mocy przekształtnika. Przedstawiono i omówiono wybrane wyniki badań eksperymentalnych.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.