Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 37

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  underground exploitation
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
PL
Międzynarodowy zespół ICSG (International Copper Study Group) opracował prognozę zapotrzebowania na miedź do 2011 r. Zgodnie z nią wydobycie miedzi wyniosło: w 2009 r. – 15,756 mln t, w 2010 r. – 16,805 mln t i (zaplanowane) w 2011 r. – 17,301 mln t. Produkcja miedzi przez rafinerie w tym okresie wyniosła odpowiednio: 18,401 mln t, 19,467 mln t i planowana 20,545 mln t. Zapotrzebowanie na miedź w tymże okresie wyniosło natomiast: 18,206 mln t, 17,937 mln t i planowane 18,851 mln t. Aby uzyskać planowane wydobycie miedzi, należy (przy zawartości 1,1% Cu w skale) poddać obróbce około 1,6 mld t urobku.
PL
W pracy zawarto dostępne informacje na temat kopalń węgla brunatnego w okolicy Górzycy, powiat słubicki. Górnictwo to funkcjonowało w latach 1850-1938. Opisano pokrótce historię poszczególnych kopalń: „Lord”, „Karl Ferdinand”, „Humboldt” oraz „Finke”. Scharakteryzowano także warunki geologiczne oraz sposób prowadzenia wydobycia. Praca oparta jest na historycznych mapach geologicznych oraz topograficznych, a także zachowanych dokumentach nadań górniczych.
EN
The paper presents available information about history of lignite mining in region of Górzyca (north-west part of Ziemia Lubuska -West Poland). Lignite mines operated here in years 1850-1938. The paper describes briefly the history of particular mines:„Lord”, „Karl Ferdinand”, „Humboldt” and „Finke”. Also underground mining in complicated geological condition (glaciotectonic deformations) was presented. The paper is based on remained German archival materials and also historical map: geological and topographic.
PL
Artykuł przedstawia trzy metody modelowania niepełnych niecek obniżeniowych w stanie asymptotycznym na przykładzie obserwacji z trzech linii pomiarowych nad zawałową eksploatacją węgla kamiennego. Obliczono przeciętne wartości obniżeń powierzchni po wyeksploatowaniu jednej (małe pole eksploatacji) oraz trzech ścian węglowych (duże pole eksploatacji), a następnie porównano je z wynikami obliczeń prognostycznych. Przeanalizowano wpływ geometrycznego oraz operatorowego typu obrzeża eksploatacyjnego, jako parametru zmodyfikowanej teorii Knothego. Ostatnia metoda, tzw. metoda zastępczych parametrów ae i tgβe , dopuszcza zmianę ich wartości w zależności od rozwoju pola eksploatacji. Dodatkowo, zaproponowano metodę wyznaczania wartości współczynnika proporcjonalności obniżeń ae w zależności od głębokości i rozmiarów eksploatacji. Niezależnie od zastosowanej metody wyniki modelowania obniżeń powierzchni terenu wykazują dużą zgodność z wynikami pomiarów.
EN
The paper presents three methods of modelling incomplete subsidence troughs the asymptotic state. Observation were carried out on three observation lines above coal longwall extraction with caving. Subsidence after extraction one (sc. 1 – small operation field) and three longwalls (sc. 1, sc. 2, sc. 3 – large operation field) were calculated. Then predictive calculation were made and once with average subsidence were compared. The influence of two types of operating rim (geometric and operator rim) were analyzed. The operating rim is it the third parameter of modified Knothe’s theory. The last method called “method of substitute parameters ae and tgβe”. It allows to change their values depending depth and size of the field operation. Furthermore, method of determining value of proportionality coefficient of subsidence ae was presented. Despite different methods of modelling, the results show good agreement as to the description of the surface subsidence.
PL
W pracy zawarto dotychczas niepublikowane informacje na temat kopalni węgla brunatnego „Borussia”, która funkcjonowała w latach 1855-1932 niedaleko wsi Trześniów koło Ośna Lubuskiego. Opisano historię kopalni, a także odkrycia węgla w okolicy Ośna. Scharakteryzowano także warunki geologiczne oraz górnicze eksploatacji i sposób jej prowadzenia. Praca zawiera historyczne mapy górnicze i topograficzne.
EN
The paper presents history of lignite mining in region of Ośno Lubuskie (north west part of Ziemia Lubuska -West Poland). It describes under-ground mining in complicated geological condition (glaciotectonic deformations). The paper is based on remained German archival materials (Main Mining Office) and also some Polish materials. The paper also describes the discovery of lignite deposits in the nineteenth century, as well as the detailed history of one of the largest mines in the region, i.e. "Borussia" in Trześniów. The paper is supplemented with historical maps showing the locations of the mines and presents the available technical and statistical data.
PL
Podziemna eksploatacja kamieni blocznych jest rozpowszechniona w wielu krajach europejskich. Jej popularność będzie niewątpliwie rosnąć, przede wszystkim w związku z uwarunkowaniami środowiskowymi, przestrzennymi i ekonomicznymi. Najczęstszą przyczyną uruchamiania eksploatacji podziemnej tych skał jest rosnące zapotrzebowanie na niektóre materiały kamienne, których wydobywanie metodą odkrywkową jest utrudnione lub niemożliwe. Istotnym aspektem eksploatacji podziemnej musi być gwarantowana długoterminowa stabilność geomechaniczna górotworu. W artykule przedstawiono ocenę możliwości i celowości podziemnej eksploatacji 19 złóż kamieni blocznych w Sudetach i Górach Świętokrzyskich. W wyniku przeprowadzonej wielokryterialnej oceny, uwzględniającej czynniki geologiczno-zasobowe, geologiczno-górnicze, środowiskowe, jakościowe i ekonomiczne, do szczegółowych analiz wytypowano cztery złoża: wapieni jurajskich Wola Morawicka, wapieni dewońskich Szewce, zlepieńców permskich Zygmuntówka w Górach Świętokrzyskich, oraz piaskowca Radków w Górach Stołowych na Dolnym Śląsku. W każdym z czterech analizowanych przypadków ustalono podstawowe założenia rynkowe, produkcyjne, techniczne udostępniania i eksploatacji złoża, szacunkowe wielkości nakładów inwestycyjnych i kosztów operacyjnych. Niestety, przy przyjętych założeniach wartość wszystkich analizowanych projektów, określona z zastosowaniem podejścia dochodowego metodą zdyskontowanych przepływów pieniężnych, była zdecydowanie ujemna. Największa szansa podjęcia takiej eksploatacji istnieje w przypadku złoża piaskowca Radków i złoża wapienia Wola Morawicka, ale pod warunkiem wzrostu cen bloków o min. 20% i/lub znaczącego wzrostu wielkości zakładanej sprzedaży.
EN
Underground extraction of dimension stone is widespread in many European countries. Its popularity will undoubtedly grow, mainly due to environmental considerations and the accessibility of deposits for extraction. The most common reason for launch of underground dimension stone mining is demand for some stone materials which commonly can not be obtained from opencast mining. An important aspect of such operation is guaranteed long-term geomechanical stability of post-mining voids. In the paper, there is presented assessment of possibilities and purposefulness of underground extraction for 19 dimension stone deposits located in the Sudetes and in the Świętokrzyskie Mountains. As a result of multi-criteria assessment taking into account geological, resource, mining, environmental and economic factors, four deposits were selected for detailed analysis: Wola Morawicka Jurassic limestone deposit, Szewce Devonian limestone deposit, Zygmuntówka Permian carbonate conglomerate – all in the Świętokrzyskie Mountains, as well as Radków Cretaceous sandstone deposit in the Sudetes. In each case, some basic assumptions on market, production and deposit development, as well as estimated level of capital investments and operation costs, were adopted. Unfortunately, with such assumptions, net present value of each analyzed project, established by discounted cash flow method, was distinctly negative. The most promising for underground extraction are Radków sandstone deposit and Wola Morawicka limestone deposit, provided growth of blocks’ prices by min. 20% and/or significant increase of blocks’ sales.
PL
Artykuł przedstawia problem występujący na terenach związanych przed II wojną światową i krótko po niej z podziemnym górnictwem węgla brunatnego. Na ziemi lubuskiej na przestrzeni ok. 150 lat funkcjonowało kilkaset podziemnych kopalń węgla. Obecnie część terenów pokopalnianych podlega zagospodarowaniu, np. dla celów zabudowy mieszkaniowej. Do tej pory brak jest wypracowanej procedury badań geologicznych i geofizycznych, jakie powinny mieć zastosowanie na tym terenie. Zaprezentowano konkretne przykłady badań, w tym geofizycznych, jakie zostały przeprowadzone w celu określenia przydatności terenów pogórniczych na cele budowlane w Zielonej Górze. Podano także krótki opis sposobu i zarys historii eksploatacji węgla brunatnego.
EN
On the background of the former method of lignite extraction (already not used in Poland) and short history of lignite mining, the paper presents the problem of surface deformation connected with former underground lignite mining on Ziemia Lubuska (West Poland). Currently part of this area is going to be a builtup area. The paper presents one example of complex geological or geophysical investigation executed in Zielona Góra to determine possibility of development of the area. 7 boreholes to the depth of 10 m, 3 boreholes of 20 m, dynamic tests and static tests (CPT) to the depth of 13–21 m were done. CPT tests and boreholes didn’t show any zone of lower soil density, which could be correlated with loosen soil above former lignite exploitation. Standard tests were supplemented with seismic investigation by MASW 2D method. 3 seismic profiles with length of 115 m were done. A seismic boundary of zone of lower density soil were marked out. This zone can be correlated with area of discontinuous surface deformation. Geophysical investigations didn’t enable to discover location of former shafts. Performed investigations allow to determine the zone of former mining and to design residential building outside this area.
EN
The aim of this study was to evaluate the state of stress of a „voids-pillar“ structure excavated by means of the sub-level stoping method in an underground limestone quarry near Bergamo (Italy). Both the current structure of the quarry (i.e. the rooms exploited till now) and a possible future scenario were analysed using the (FDM) FLAC 2D code. The quarry has been in operation since 1927; at present, exploitation is carried out underground via the sub-level stoping method. Exploitation involves two levels, with 5 rooms on the upper level and 9 rooms on the lower level. After analysing data obtained from laboratory and in situ tests carried out on rock samples and natural discontinuities, the geomechanical properties of the medium, knowledge of which is essential in order to establish the parameters that must be included in the numerical model, were evaluated. The implementation of three numerical models made it possible to study both the present conditions of quarry exploitation and the evolution of the exploited rooms, as well as a possible expansion involving a third level of rooms. Using the results obtained regarding the stress-strain present in the pillars, a potential change in room geometry was proposed aimed at reducing the stress state inside the pillars, decreasing plasticity and increasing overall quarry safety.
PL
Celem pracy było zbadanie stanów naprężeń w strukturach składających się z filarów i pustek po wybieraniu wapienia w podziemnym kamieniołomie w pobliżu Bergamo (Włochy), metodą wybierania podpoziomowego. Zarówno obecna struktury kamieniołomu (komory powstałe po dotychczasowym wydobyciu) oraz możliwe scenariusze na przyszłość przeanalizowano przy użyciu kodu (FDM) FLAC 2D. Eksploatacja kamieniołomu trwa od 1972, w chwili obecnej wydobycie odbywa się pod ziemią, metodą wybierania podpoziomowego, na dwóch poziomach wybierania: 5 komór na poziomie wyższym i 9 komór – na niższym. Po analizie danych uzyskanych drogą testów laboratoryjnych oraz badania w terenie próbek skalnych i stref nieciągłości, określono właściwości geomechaniczne ośrodka niezbędne do obliczenia parametrów do modelu numerycznego. Implementacja trzech modeli numerycznych umożliwiła analizę zarówno obecnych warunków eksploatacji kamieniołomu, procesów zachodzących w wyeksploatowanych komorach, jak i projektowanie ewentualnego rozszerzenia wydobycia, w tym powstanie trzeciego poziomu. Wykorzystując otrzymane zależności naprężeń i odkształceń, zaproponowano zmiany w geometrii komór mające na celu obniżenie poziomu naprężeń w filarach, zmniejszenie ich podatności i ogólne podniesienie stanu bezpieczeństwa w kamieniołomie.
8
PL
Eksploatacja podziemna kamieni blocznych jest rozpowszechniona w wielu krajach europejskich. Jej popularność będzie ciągle wzrastać w związku z narastającymi problemami z prowadzeniem wydobycia metodą odkrywkową w wielu kamieniołomach. O możliwości podjęcia eksploatacji sposobem podziemnym decyduje jednak szereg czynników, które podzielić można na trzy zasadnicze grupy: geologiczno-górnicze, środowiskowe i ekonomiczne. Wprowadzenie omawianej metody wymaga szczegółowego rozpoznania geologicznego górotworu, co w dalszej kolejności pozwala na wybór odpowiedniego systemu eksploatacji podziemnej i określenie jego parametrów. Dodatkowym czynnikiem determinującym konieczność wprowadzenia podziemnego wydobycia mogą być coraz liczniejsze konflikty środowiskowe i przestrzenne. Z drugiej strony metoda podziemna, mimo swoich wysokich kosztów związanych przede wszystkim z udostępnieniem złoża, musi przynosić ekonomiczne korzyści.
EN
Underground exploitation of dimension stone is widespread in numerous European countries. Its popularity will be continuously increasing due to growing problems related to open pit exploitation in many quarries. Possibility of underground exploitation of dimension stone depends on many factors, grouped into three main areas: geological and mining factors, environmental factors and economic factors. Introduction of such mining method requires detailed geological recognition of rock formation, which is necessary for the selection of an appropriate underground mining system and its parameters. An increasing number of environmental and land use conflicts is the additional factor determining use of underground exploitation. On the other hand, underground exploitation, in spite of commonly high costs of providing works, must bring economic benefits.
PL
W artykule przedstawiono rezultaty modelowania analitycznego w zakresie geomechanicznej odpowiedzi górotworu na prowadzenie frontu robót rozcinkowych w dwóch odwrotnych względem siebie i uskoku kierunkach, ilustrujących zbliżanie się i oddalanie od zaburzenia. Punktem wyjścia podjętych analiz była zmienność współczynnika koncentracji naprężeń i gęstości energii w aspekcie oceny możliwości wystąpienia tąpnięcia na wybiegu frontu dla obu kierunków eksploatacji. W nawiązaniu do problematyki doboru metod profilaktyki tąpaniowej odniesiono się do kwestii wpływu na wielkość zagrożenia wybranych elementów technologii robót realizowanych w oparciu o systemy komoro-wo-filarowe.
EN
The paper presents the results of geomechanical, analytical modeling of rock mass behavior for two opposite cases of the exploitation front direction with reference to fault. First direction is the situation when exploitation come near to fault, second one is to move with the exploitation from the fault. The rock burst hazard assessment performed in the area ahead of the working face is studied with two factors: stress concentration coefficient and elastic strain energy density coefficient. The influence of the selected technological aspects of room-and-pillar mining exploitation system on rock burst hazard and rock burst prevention methods are discussed.
PL
Autor – w nawiązaniu do artykułu pani dr Partycji Bąk – przedstawia swój pogląd na funkcjonowanie procesu zarządzania – w tym planowania podziemnej eksploatacji złóż. Wskazuje okoliczności, które utrudniają stosowanie kryteriów ekonomicznych w planowaniu obowiązującym głębinowe kopalnie. Postuluje zakończenie prac i wdrożenie długookresowego planowania strategicznego – poprzedzającego i wspierającego ekonomizację aktualnie funkcjonującego planowania wykonawczego. Zachęca do szerokiej dyskusji tego problemu.
EN
With regard to the article by Ph.D. Patrycja Bak, the author presents his attitude to the functioning of the management process of underground exploitation. He indicates the circumstances which may hinder the application of economic criteria of planning which are obligatory for mines. The author calls for finishing the projects and implementing the long-term strategic planning – preceding and supporting the economization of the currently applied execution planning. He encourages to discuss this issue thoroughly.
11
Content available remote Przemieszczenia górnicze terenu, obciążone deformacją losową
PL
W artykule analizowano wpływ eksploatacji podziemnej na teren górniczy. Obserwacje geodezyjnie przemieszczania się punktów powierzchni terenu nie są wystarczające do pełnego oszacowania przekształcenia powierzchni podobszaru. Również odwzorowania klasyczne często nie opisują zadowalająco złożoności procesów destrukcji górotworu. Zauważalny jest tu wpływ losowego rozkładu defektów ośrodka na proces deformacji. Podjęto więc próbę opisu procesu przemieszczeń, opartą na teorii pól losowych. Analizowano probabilistyczne własności procesu - rozkłady i miary zmiennej losowej. Sformułowano model obliczeniowy procesu jako związku między przemieszczeniem, pochodną i oddziaływaniem losowym.
EN
The paper analyses the influence of underground exploitation on the mining area. Geodetic surveys concerning the dislocations of the points of the area surface are not sufficient for a complete estimation of the transformation affecting the subdomain surface. Similarly, the classical functions usually cannot be regarded as describing the complexity of the processes of rock mass destruction in an adequate and satisfying way. It is possible to observe here the influence of the random distribution of rock mass defects on the deformation process. Therefore the paper presents an attempt to describe the deformation process on the basis of random field theory. Probabilistic properties of the process - namely the distributions and measures of the random variable - are analysed. Finally, a computational model of the process is formulated as the relationship between dislocation, derivative and random impact.
EN
Forecasting deformation factors of land surface caused by mining exploitation is a complex issue, depending on many factors. The most important of them include variable geological condition, and the changing mining situation of the multi-layer exploitation. The successfully applied Budryk-Knothe theory requires the adoption of appropriate theory parameters, such as angle of main impact range or exploitation factor. This is usually carried out based on geodetic measurements. The analysis of geodetic measurements on the observation line, as presented in the article, indicates that during the exploitation of consecutive deposit, the angle of major impact range changes, and the exploitation factor grows.
PL
Prognozowanie wskaźników deformacji powierzchni terenu wywołanych eksploatacją górniczą jest zagadnieniem skomplikowanym, uzależnionym od wielu czynników. Najważniejsze z nich to między innymi zmienne warunki geologiczne oraz zmieniająca się sytuacja górnicza przy wielopokładowej eksploatacji. Stosowana z dużym powodzeniem teoria Budryka-Knothego wymaga przyjęcia odpowiednich parametrów teorii takich jak kąt zasięgu wpływów głównych czy współczynnik eksploatacji. Realizowane jest to najczęściej w oparciu o pomiary geodezyjne. Przedstawiona w artykule analiza pomiarów geodezyjnych na linii obserwacyjnej wskazuje, że podczas eksploatacji kolejnego pokładu zmienia się kąt zasięgu wpływów głównych oraz wzrasta współczynnik eksploatacji.
PL
Ruch pustki poeksploatacyjnej w górotworze można utożsamiać z inwersją wsypywania się rumoszu skalnego w przestrzeń po wybraniu pokładu kopaliny. Ponieważ wędrujące pustki mają skończone wymiary, a ich ruchy są przypadkowe, przebieg licznych, zdefiniowanych w artykule wskaźników deformacji ma charakter stochastyczny. Lokalne, odmienne zdefiniowanie prawdopodobieństwa ruchu pustek (uskok w górotworze), skutkuje anomaliami w rozkładach wskaźników deformacji.
EN
The movement of a post-extraction void can be identified with the inversion of getting of rock debris into the space after mineral deposit extraction. Because migrating voids have finite dimensions, and their movements are accidental, the course of numerous, defined in the article indices has a stochastic character. Local, differently defined probabilities of void movement (fault in the rock mass), result in anomalies in the deformation indices distributions.
14
Content available remote Analiza trajektorii dynamiki procesu przemieszczeń pogórniczych
PL
Artykuł dotyczy analizy trajektorii przemieszczania się punktów ośrodka w rejonie wpływów eksploatacji podziemnej. Oszacowany rozrzut procesu przemieszczeń - na podstawie analiz - wskazuje, że dokładność opisu deterministycznego jest tu istotnie ograniczona. Stąd w pracy podano równania opisu quasistochastycznego i przedstawiono stosowne odwzorowanie ilościowe konkretnego procesu. Ocena jakości odwzorowania - przez odpowiednie miary - potwierdza dobre pokrycie realnych wyników (pomiary) odwzorowaniem quasistochastycznym.
EN
The paper concerns the analysis of the dynamics of the points displacement in area of mining influences. The problem of changes of body configuration caused by undregound minig influence has been described in the term of goodnes of fit do resluts of field measurments. Observations of the real process indicate that the trajectories of points movement are characterized by the irregularity therefore anlysis has benn characterized by randomness of the phenomenon.lt follows that in general the description of a deterministic process can not be approximated with any accuracy of measurement results. In this paper the trial of reflection of analyzed process by stochastic formula has been presented.
PL
W artykule przedstawiono lokalizację i warunki geologiczno-górnicze ściany badawczej 1/VI w pokładzie 385/2 wyposażonej w pierwszy w kopalni "Bogdanka" kompleks strugowy. Ściana ta, o długości 250 m, uruchomiona została w marcu 2010 roku, a docelowy wybieg 1 750 m osiągnęła w październiku roku 2010 . W artykule scharakteryzowano ścianę badawczą i kompleks mechanizacyjny oraz przedstawiono pełne wyniki produkcyjne osiągnięte przez tę ścianę. Przedstawiono również zamierzenia kopalni w zakresie dalszego wdrażania techniki strugowej w kopalni "Bogdanka", w szczególności dotyczącej lokalizacji drugiej ściany strugowej dla pierwszego kompleksu oraz planów zakupu przez kopalnię "Bogdanka" drugiego kompleksu strugowego.
EN
The article presents the localization and geological and mining conditions of the 1/VI test wali in the 385/2 stratum equipped with the first in the "Bogdanka" coal mine stream complex. Works in this 250 meter long wali started in March 2010 and the target run of 1750 was reached in 2010. The article characterizes the test wali and the mecha-nization complex as well as it presents full production results achieved by the wall. The plans of the coal mine in the scope of further implementation of the stream technique in the "Bogdanka" coal mine, in particular regarding the localization of the second stream Wall for the first complex and purchase plans of the "Bogdanka" coal mine of the second stream complex, are presented.
PL
Artykuł dotyczy harmonogramowania produkcji w Lubelskim Węglu "Bogdanka" SA z wykorzystaniem narzędzi numerycznych. Przedstawiono dotychczasowe doświadczenia zdobyte w trakcie wdrażania systemu w części dotyczącej tworzenia harmonogramów robót udostępniających i eksploatacyjnych. Pokazano zalety, jak i ograniczenia systemu w odniesieniu do dotychczasowych metod tworzenia harmonogramów.
EN
This article applies to production scheduling in the Lublin Coal "Bogdanka" SA mine with the use of numerical tools. The experiences gained during implementalion of the system in the part concerning the scheduling of open ing up - development works and exploitation operations have been presented. The advantages and limitations with regard to existing methods for scheduling have been shown.
PL
Eksploatacja pokładów grubych w kopalniach węgla kamiennego przysparza wielu problemów technicznych, związanych z trudnością wybrania pokładu na całą grubość jedną warstwą oraz skutkami na powierzchni terenu górniczego. W obecnym stanie technologii górniczych jest możliwe efektywne i bezpieczne wybieranie systemem ścianowym grubych pokładów, zalegających poziomo lub prawie poziomo jedną warstwą na wysokość nawet do 6 m. Pokłady grubsze - o czym mowa w artykule - wybiera się zazwyczaj z podziałem na warstwy, tradycyjnym systemem ścianowym z zawałem stropu lub z podsadzką, z pozostawianiem (lub nie) ochronnej warstwy węgla w pułapie wyrobiska, z układaniem sztucznego stropu lub z rekonsolidacją gruzowiska zawałowego warstwy wyższej.
EN
The exploitation of thick seams in the hard coal mines causes many techni.cal problems connected with the difficulty of extracting of an entire thickness of the seam by a single layer and with the effects to the surface of the mining area. With the present status of mining technologies it is possible to effectively and safely extract thick seams by longwall.systems. It regards the seams horizontally or almost horizontally bedded with the height even of up to 6 m. Thicker seams - being the subject of discussion in this article - are usually extracted with their subdivision into layers , by a traditional longwall system with the roof cave-in or with the backfilling, leaving (or not) a protective coal layer in the roof of the working, with the arrangement of an artificial roof or reconsolidation of the cave-in debris of the upper layer.
PL
W artykule omówiono podstawowe zagadnienia związane z eksploatacją pokładów węgla systemami innymi niż systemy ścianowe. Omówienie systemów niestandardowych (krótkofrontowych) jest wskazane. Mogą one być zastosowane przy wybieraniu partii złoża zaburzonego lub tak zwanych "resztek pokładów", których wydobycie jest uzasadnione głównie ze względów bezpieczeństwa. Wartykule omówiono systemy stosowane w polskich kopalniach, od których na ogół pochodzi ich nazwa (system jankowicki, miechowicki itp.). Należą do nich systemy zabierkowo-ubierkowe, systemy zabierkowe z zawałem stropu i z podsadką hydrauliczną oraz inne systemy krótkofrontowe. Przy obecnym poziomie techniki górniczej, zwłaszcza przy produkcji lekkich kombajnów górniczych (chodnikowych), wdrożenie powszechne systemów krótkofrontowych może być doskonała alternatywą.
EN
The article discusses the basic issues related to the exploitation of coal by the systems other than longwalling. Overview of non standard systems (short front ones) is recommended. They can be used during extraction of a parcel of a disturbed deposit or the so called "residual seams" the extraction of which is justified mainly for safety reasons. This article describes the systems used in Polish coal mines from which, as a rule, the name of extraction system is derived (jankowice system, miechowice system, etc.). These include shortwall systems, shortwall systems with roof cave-in and hydraulic backfilling and other short front methods. With the present advancement of mining technology, especially in the manufacturing of light rock wining machines (roadheaders) the common implementation of short front systems can become a perfect alternative.
PL
W artykule omówiono podstawowe zagadnienia związane z eksploatacją pokładów węgla systemami ścianowymi przy czym szczegółowo potraktowano systemy z podsadką suchą i hydrauliczną. Ze względu na mniejsze obecnie znaczenie podsadzki suchej (bardzo pracochłonna, wymaga dodatkowego systemu transportowego), w artykule bardziej szczegółowo omówiono podsadzkę hydrauliczną, a mianowicie poszczególne odmiany tego systemu eksploatacji oraz szczegóły organizacyjno-techniczne związane z prowadzeniem takich ścian. Bardzo ważnym zagadnieniem przy stosowaniu podsadzki hydraulicznej jest proces zabezpieczania stropu w przestrzeni przeznaczonej do podsadzania jak również specyfika wygradzania (tamowania) tej przestrzeni.
EN
The article discusses the basic issues related to exploitation of coal systems by longwalling with a special detailed treatment of longwall systems with dry and hydraulic back filling. Due to the less importance of dry stowing nowadays (very labor intensive, requires an additional transport system), the article discusses in more detail hydraulic back filling, namely the different variations of this exploi.tation system and technical-organizational details associated with the operation of such longwalls. A very important issue when applying hydraulic back filling consists in the process of securing the roof in the space intended for back filling as well as the specifics of partitioning (sealing off) of this space.
PL
Obowiązujące przepisy, czyli ustawa Prawo geologiczne i górnicze - w celu zapewnienia bezpieczeństwa pracy - stawiają wymóg opracowywania planu ruchu zakładu górniczego, dokumentu bezpieczeństwa oraz różnych projektów, dokumentacji technicznych i technologii prowadzenia robót w kopalni. Artykuł w sposób szczegółowy omawia wymienione dokumenty i projekty. Autor wspomina również o jeszcze jednym bardzo istotnym dokumencie - "Karcie zmian projektu technicznego", która zawiera konieczne zmiany w zatwierdzonym już planie ruchu.
EN
Existing legal regulations, namely the law act - Geological and Mining Law - in order to ensure safety at work - imposes the requirement of preparing the plan of mining operations at the mine , a document on safety and various projects, technical documentation and technology of conducting mining operations in the mine. The article discusses these documents and projects in detail. The author also mentions another, a very important document - "A Charter of amendments to the technical draft", which contains the necessary changes in the already approved plan of mining operations.
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.