Wyniki wyszukiwania - BazTech

1

Studies on Pollution due to discharge of effluent from Pharmaceutical Industries of Dombivali Industrial Belt of Mumbai, India

Singare P. U., Dhabarde S. S.

International Letters of Chemistry, Physics and Astronomy

|

2014

|

Vol. 3

16-23

EN

The paper deals with monitoring of pollution arising due to pharmaceutical based industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The concentration level of majority of toxic heavy metals like Cu, Cr, Pb, Fe and Zn were found to be maximum of 14.06, 0.57, 0.42, 18.93 and 3.31 ppm respectively in the month of February, while Ni concentration was found to be maximum of 0.43 ppm in the month of June. The pH and BOD values were reported to be maximum of 12.54 and 546 ppm respectively in the month of October. The conductivity and total solid content was found to be maximum of 27400 μmhos/cm and 9401 ppm respectively in the month of June. The cyanide content was maximum of 0.13 ppm in the month of April. The alkalinity, hardness, salinity, chloride, phosphate and COD content was reported maximum of 852, 694, 10.36, 4821, 46.32 and 1271 ppm respectively in the month of February. The DO content was found to be minimum of 3.00 ppm in the month of February. It was observed that the level of many of these toxic heavy metals except Zn and various physico-chemical parameters were above the tolerable limit set for inland surface water. From the results of the present investigation it seems that the time has come to move towards ecosystem specific discharge standards to maintain the health and productivity of natural resources on which the majority of Indians are dependent.

2

Pollution due to Textile Industries along Dombivali Industrial Belt of Mumbai, India

Singare P. U., Dhabarde S. S.

International Letters of Chemistry, Physics and Astronomy

|

2014

|

Vol. 3

24-31

EN

The paper deals with monitoring of pollution arising due to textile based industries located along the Dombivali industrial belt of Mumbai, India. The study was carried for the period of one year from June, 2012 to May, 2013 to study the level of toxic heavy metals and the physico-chemical properties of waste water effluents discharged from the above industries. The concentration level of majority of toxic heavy metals like Cu, Ni, Pb, and Zn were reported to be maximum of 45.58, 2.00, 2.06 and 9.20 ppm respectively in the month of April, while Cr and Fe concentration levels were found to be 2.50 and 55.30 ppm in the month of March. The effluent samples collected in the month of July was reported to show high BOD content of 564 ppm, while COD content was maximum of 2436 ppm in the month of October. The effluent samples collected in the month of January was having very low DO content of 3.21 ppm and high cyanide content of 0.09 ppm. The alkalinity, hardness and chloride content were maximum of 2158, 198 and 2765 ppm respectively in the effluent samples collected in the month of February. The effluents were having high total solid content of 8269 ppm during the month of April, while the salinity and phosphate contents were reported high of 5.64 and 125.70 ppm during the month of May. It was observed that the concentration level of majority of toxic heavy metals and the values of various physico-chemical parameters were above the tolerable limit set for inland surface water. The present experimental data on environmental risk assessment studies due to textile industries may be regarded as an aid towards a better understanding of the problem arising due to such industries. There is a need to convey the message that prevention of adverse health effects and promotion of health are profitable investments for employers and employees as a support to a sustainable development of economics.

3

Determination of metals in sea water of the Baltic Sea in Międzyzdroje

Daniszewski P.

International Letters of Chemistry, Physics and Astronomy

|

2013

|

Vol. 13

13-22

EN

The present research work deals with the quantification of toxic heavy metals in the water samples collected from sea water in Międzyzdroje. While the annual average concentration of Cadmium was calculated as 0.44 ppm in 2008 of the year and 0.46 ppm in 2009 of the year. The values obtained were found to be below the permissible limit of 2.0 ppm set for inland surface water. While the annual average concentration of Chromium was calculated as 2.67 ppm in 2008 of the year and 2.64 ppm in 2009 of the year. Which was very much above the permissible limit of 0.1 ppm set for inland surface water. The observed annual average concentration of Copper in the water was 0.08 ppm in 2008 of the year and 0.05 ppm in 2009 of the year, which was below the permissible limit of 3.0 ppm set for inland surface water. While the annual average concentration of Mercury was calculated as 0.05 ppm in 2008 of the year and 0.05 ppm in 2009 of the year, which was very much above the maximum limit of 0.01 ppm set for inland surface water. The annual average concentration of Nickel in the water samples was observed to be 2.47 ppm in 2008 of the year and 2.70 ppm in 2009 of the year, which is close to the limit of 3.0 ppm set for inland surface water. The annual average concentration of Lead in the water samples was observed to be 0.06 ppm in 2008 of the year and 0.05 ppm in 2009 of the year, which is above the permissible limit of 0.1 ppm set for inland surface water. The results of the present investigation indicate that the annual average concentration of Zinc in water samples was 3.45 ppm in 2008 of the year and 3.73 ppm in 2009 of the year, which is above the permissible limit of 5.0 ppm set for inland surface water.

4

Zawartość toksycznych metali w materiałach, płuczkach i odpadach wiertniczych oraz ocena związanych z nimi potencjalnych zagrożeń

Hajdus D., Wielowieyska B.

Prace Instytutu Górnictwa Naftowego i Gazownictwa

|

2000

|

nr 110 wyd. konferencyjne

785--790

EN

Many fears of negative impact causcd by drilling wastes gathered in reserve pits and burried in the ground refer to possibility of water and soil pollution by heavy metals. It is the reason why in the chemical investigations of drilling material, drilling fluid and drilling waste toxicity heavy metal content is determined. In this paper the results of such determinations carried out in Poland comments on environmental threats connected with heavy metals in drilling wastes area given.