Wyniki wyszukiwania - BazTech

Ograniczanie wyników

1 Journal of Achievements in Materials and Manufacturing Engineering

1 2018

Znaleziono wyników: 1

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: thickness of the welds

Sortuj według:

Ogranicz wyniki do:

Laser treatment with 625 Inconel powder of hot work tool steel using fibre laser YLS-4000

Dobrzański L. A., Jonda E., Pakieła W., Dziekońska M.

Journal of Achievements in Materials and Manufacturing Engineering

2018

Vol. 91, nr 2

60--67

Purpose: The purpose of this investigation was to determine the changes in the surface layer (Inconel 625), obtained during the laser treatment of tool-steel alloy for hot work by the use high-power fibre laser. Design/methodology/approach: Observations of the layer structure, HAZ, and substrate material were made using light and scanning microscopy. The composition of elements and a detailed analysis of the chemical composition in micro-areas was made using the EDS X-ray detector. The thickness of the resulting welds, heat affected zone (HAZ) and the contribution of the base material in the layers was determined. Findings: As a result of laser cladding, using Inconel 625 powder, in the weld overlay microstructure characteristic zones are formed: at the penetration boundary, in the middle of weld overlay and in its top layer. It was found that the height of weld overlay, depth of penetration, width of weld overlay and depth of the heat affected zone grows together with the increasing laser power. Practical implications: Laser cladding is one of the most modern repair processes for eliminating losses, voids, porosity, and cracks on the surface of various metals, including tool alloys for hot work. Laser techniques allow to make layers of materials on the repaired surface, that can significantly differ in chemical composition from the based material (substrate material) or are the same. Originality/value: A significant, dynamic development in materials engineering as well as welding technologies provides the possibility to reduce the cost of production and operation of machinery and equipment, among others by designing parts from materials with special properties (both mechanical and tribological) and the possibility of regeneration of each consumed element with one of the selected welding technologies.