Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 2018

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: surface roughness reduction

Sortuj według:

Ogranicz wyniki do:

Kształtowanie warstwy wierzchniej staliwa typu dupleks poprzez toczenie

Dyl T.

Zeszyty Naukowe Akademii Morskiej w Gdyni

2018

nr 105

41--52

W pracy przedstawiono wyniki badań własnych toczenia staliwa typu dupleks w gatunku GX2CrNiMoCuN25-6-3-3. Celem badań było określenie geometrii ostrza i parametrów technologicznych skrawania sprzyjających uzyskaniu chropowatości, będących w zakresie obróbki bardzo dokładnej, co pozwoli na osiągnięcie odpowiedniej jakości technologicznej powierzchni przedmiotu obrabianego. Po dokonanych badaniach eksperymentalnych ustalono występowanie zmniejszenia chropowatości przy zastosowaniu odpowiednich płytek skrawających. Obróbkę toczeniem staliwa typu dupleks zrealizowano przy zadanych parametrach technologicznych: posuw f = 0,1–0,2 mm/obr; głębokość skrawania ap = 0,5 mm, prędkość skrawania vc = 50–100 m/min. Toczenie wykończeniowe przeprowadzono na tokarce uniwersalnej CDS 500x1000 dla różnych geometrii wymiennych płytek wieloostrzowych typu CCMT z węglików spiekanych pokrywanych powłokami CVD.

The paper presents results of experimental studies of turning cast steel grade GX2CrNiMoCuN25-6-3-3. The aim of the research was to determine the geometry of the cutting edge and the technological parameters of cutting that are conducive to obtaining the roughness in the field of very accurate machining. It can achieve the appropriate technological quality of the workpiece surface. After experimental studies it was determined that there is a reduction of roughness using suitable inserts. Turning were made for the duplex cast steel. The technological parameters of machining process were used: feed rate f = 0.1–0.2 mm/rev, depth of cut ap = 0.5 mm, cutting speed vc = 50–100 m/min. Longitudinal machining was made using universal lathe CDS 500 ´ 1000 equipped with CCMT carbide tipped inserts with CVD coatings.

The influence of the geometry of the cutting edge and machining parameters of duplex cast steel after turning

Dyl T. C.

Journal of KONES

2018

Vol. 25, No. 4

75--81

The development and research activity is connected to the production of newer and more functional products. Innovative processes are being developed and applied; services and projects are delivered. Products are work items that should be initially designed, then manufactured and finally sold and utilized. Examples of products may be airplanes, ships, cars, machine tools, gears, crankshafts, drive shaft, tubes as well as gasoline, electricity and gas, etc. The product has to meet the expectations of the future use. It is characterized by a set of functional features. In the case of machines and their capabilities and performance, for example, durability, reliability, resulting from the characteristics represented by the structural units forming the structure. The formation of the desired features of the surface layer in the technological process is an important problem due to the ability of the elements of kinematic pairs to fulfil the function as long as possible foreseen for them. The article presents results of experimental studies of turning cast steel grade GX2CrNiMoCuN25-6-3-3. The aim of the research was to determine the geometry of the cutting edge and the technological parameters of cutting that are conducive to obtaining the roughness in the field of very accurate machining. It can achieve the appropriate technological quality of the workpiece surface. After these experimental studies was determined that there is a reduction roughness using suitable inserts. Turning was made for the duplex cast steel. The technological parameters of machining process were used: feed rate f = 0.1-0.2 mm/rev, depth of cut ap = 0.5 mm, cutting speed vc = 50-100 m/min. Turning was made using universal lathe CDS 500x1000 equipped with CCMT carbide tipped inserts.