Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 4

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  sulphur bacteria
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available remote The structure of the porosity of the cement mortar CEM I exposed to microorganisms
EN
In this paper an attempt to analyse the impact of different microbial environments on the structure of materials. The study used Portland cement mortar with CEM I. As a corrosive environment uses microorganisms: fungi Penicillium and Cladosporium species, sulphur bacteria and denitrifying. The study also used mixed biological environment – material at first was contaminated with bacteria, and then with mould fungi. Following this study observed changes in density and total porosity. Microbial corrosion products may locate in the pores with a diameter size of less than 10 nm to 5000 nm. There is a rearrangement of the pores and accumulation in the pores with a diameter 10–100 nm.
PL
W referacie podjęto próbę analizy wpływu różnych środowisk mikrobiologicznych na strukturę porowatości tworzyw cementowych. Do badania zastosowano zaprawę z cementu portlandzkiego CEM I. Jako środowisko korozyjne użyto środowisko mikroorganizmów: grzyby gatunku Penicillium i Cladosporium, bakterie siarkowe i denitryfikujące. Do badań wykorzystano również mieszane środowisko biologiczne – materiał najpierw został skażony bakteriami a później grzybami pleśniowymi. W wyniku przeprowadzonych badań zauważono zmiany gęstości i porowatości całkowitej. Produkty korozji mikrobiologicznej prawdopodobnie lokują się w porach o wymiarze średnic poniżej 10 nm do 5000 nm. Następuje przegrupowanie porów i wyraźne zaznaczenie porów o średnicy 10–100 nm.
EN
The article presents the effect of the addition of polymer to mortars with CEMI and its influence on durability under conditions of sulfuric acid or nitric and sulphur bacteria or nitrogen (nitrification and denitrification). Both acids corresponds to the products of metabolism of bacteria Acidithiobacillus thiooxidans and Thiobacillus denitrificans, Paracoccus denitrificans by the literature is about 0.15 mmol/dm3. The changes in tightness materials studied by determining moisture mass and absorption. Corrosion processes were identified by examination in a scanning microscope equipped with an X-ray microanalyzer and a mercury porosimeter. The research results presented showed that the solution has a significantly weaker effect on the composite cement and cement-polymer compared with the action of bacteria. The action of both environments caused two opposing processes: unsealing the structure and deposition of corrosion products.
PL
Przedstawiono możliwości optymalizacji biologicznych procesów usuwania siarczanów(VI) i siarczków ze ścieków. W badaniach wykorzystano bakterie naturalnego obiegu siarki przy zastosowaniu modelu beztlenowego złoża biologicznego o pojemności 1,5 dm3. Stosowano S-dobowy czas zatrzymania ścieków i obciążenie hydrauliczne 0,013 m3/m2 · h. Zbiornik tlenowy posiadał również pojemność 1,5 dm3 i także stosowano S-dobowy czas zatrzymania ścieków. Proces prowadzono w dwóch etapach, stosując ścieki syntetyczne zawierające różne źródła węgla organicznego oraz różne stężenia toksycznego kadmu. Pierwszy etap przebiegał w warunkach beztlenowych, natomiast drugi w warunkach tlenowych. Podczas desulfurykacji użyto bakterii z rodzaju Desulfovibrio desulfurieans, w procesie tlenowym Aciditlziobacillus ferrooxidans (Tlziobacillus ferrooxidans). Pierwszy etap spowodował zmniejszenie stężenia siarczanów o ponad 90% - w zależności od źródła węgla organicznego i stężeń kadmu. Procesy tlenowe umożliwiły eliminację siarczków. Siarczki zostały usunięte prawie w 100%.
EN
The aim of the presented investigations was optimisation of biological sulphate and sulphide removal from waste water. Bacteria of the natural sulphur cycle have been applied in the experiments. A biological anaerobic fixed bed filter of a volume of 15 dm3, hydraulic load of 0.013 m3/m2 · h, and hydraulic retention time was 5 days was used in the investigation carried out. The aerobic tank bad of volume of 1.5 dm3 and was operated under similar hydraulic retention time. Investigations were carried out in two steps, using synthetic sewage as the feed composed of different carbon sources and different concentrations of toxic cadmium. The first step of treatment was carried out under anaerobic condition, while the second one - in aerobic conditions. In the desulfurication step Desulfovibrio desulfuricans bacteria, and in the aerobic process Acidithiobacillus ferrooxidans (Thiobacillus ferrooxidans) were used. In the first step a decrease of sulphates coneentration above 90% was achieved - in dependence on carbon source and cadmium concentration. The aerobic processes resulted in sulphides removal. Sulphides were removed at almost 100%.
EN
The examinations were conducted at the area not reclaimed in the former Sulphur Mine "]eziórko" in 2001. Soil was sampled from four areas of various degradation level, i.e. from the area near the operating holes (area I, II and III) and the area remoted from sulphur excavation sites (area IV). Soil from the immediate extraction of sulphur showed a very high acid reaction (PH 1.3-1.9), it contained a trace amount of organic matter and calcium carbonate. Besides it demonstrated minimal microbiological activity evaluated on the basis of the count of bacteria, actiomycetes and soil fungi, the count of aerobic sulphur bacteria and physiological activity of cellulose microorganisms. Very low microbiological activity, acid reaction (pH 3.7-4.7), a low content of organic sulphur and calcium carbonate (yet higher than at sulphur excavation places) were also demonstrated by the soils from two other areas. However, among the soils studied the highest microbiological activity was shown by the one from the area remoted from the places of sulphur excavation.
PL
Badania przeprowadzono na terenie nie poddanym rekultywacji w byłej Kopalni Siarki "Jeziórko" w roku 2001. Próby glebowe pobrano z czterech powierzchni o różnym stopniu degradacji, tj. z terenu położonego w pobliżu otworów eksploatacyjnych (3 powierzchnie badawcze) oraz z terenu oddalonego od miejsca wydobycia siarki (I powierzchnia badawcza). Gleba z terenu bezpośredniego wydobycia siarki wykazywała odczyn bardzo kwaśny (pH 1,3-1,9), zawierała śladowe ilości substancji organicznej i węglanu wapnia oraz charakteryzowała się minimalną aktywnością mikrobiologiczną ocenianą na podstawie liczebności bakterii, promieniowców i grzybów glebowych, liczebności tlenowych bakterii siarkowych oraz aktywności fizjologicznej mikroorganizmów celulolitycznych, Bardzo niską aktywnością mikrobiologiczną, kwaśnym odczynem (pH 3,7-4,7), niewielką zawartością substancji organicznej i węglanu wapnia (aczkolwiek wyższą niż gleby z miejsc wydobycia siarki) charakteryzowały się także gleby z pozostałych dwóch powierzchni, przy czym najwyższą aktywnością mikrobiologiczną spośród badanych gleb charakteryzowała się gleba z terenu oddalonego od miejsc wydobycia siarki.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.