Wyniki wyszukiwania - BazTech

Ograniczanie wyników

2 2016

Znaleziono wyników: 2

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: stress distributions in front of the crack

Sortuj według:

Ogranicz wyniki do:

Experimental – Numerical Analysis of Stress State in Front of the Crack Tip of Modified and Unmodified G17CrMo5-5 Cast Steel by Rare Earth Metals in a Brittle-Ductile Transition Region

Dzioba I., Pala A., Kasinska J.

Archives of Metallurgy and Materials

2016

Vol. 61, iss. 2B

1175--1181

In the paper presented experimental data and numerical analysis of stress distribution in front of the crack of two melts of low-alloy G17CrMo5-5 cast steel-modified (M) by rare earth metals and original, unmodified (UM) in the temperature range, according to the brittle-ductile transition region. Experimental tests include determination of the tensile properties and fracture toughness characteristics for the UM and M cast steel. Numerical analysis includes determination of stress distribution in front of the crack at the initial moment of the crack extension. In the numerical computations, experimentally tested specimens SEN(B) were modeled. The true stress-strain curves for the UM and M cast steel were used in the calculation. It was shown that the maximum of the opening stresses at the initial moment of the crack extension occurs in the axis of the specimens and reaches similar level of about 3.5σ0 for both UM and M cast steel. However, the length of the critical distance, measured for stress level equal 3σ0, is great for the M in comparison to the UM cast steel. Also was shown that the UM cast steel increased the level of the stress state triaxiality parameters that resulted in a decrease of fracture toughness.

The FEM analysis of stress distribution in front of the crack tip and fracture process in the elements of modified and unmodified cast steel G17CrMo5-5

Pała R., Dzioba I.

Acta Mechanica et Automatica

2016

Vol. 10, no. 3

201--206

The article presents influence of modification of the low-alloy cast steel G17CrMo5-5 by rare earth metals on stress distribution in front of the crack at the initial moment of the crack extension. Experimental studies include determination of strength and fracture toughness characteristics for unmodified (UM) and modified (M) cast steel. In the numerical computations, experimentally tested specimens SEN(B) were modelled. The true stress–strain curves for the UM and M cast steel are used in the calculation. The stress distributions in front of the crack were calculated at the initial moment of the crack extension. On the basis of data on the particle size inclusions in the UM and M cast steel, and the calculated stress distributions was performed an assessment of the possibility of the occurrence of cleavage fracture. The analysis results indicate that at room temperature for the UM cast steel, there is a possibility of cleavage fracture, while for the M cast steel occurrence of cleavage fracture is negligible.