Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 9

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  stop trójskładnikowy
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Bismuth thermodynamic activities in Bi-Cu-Sn liquid alloys were measured by means of the vapour saturation method at 1373K, 1423K and 1473K. These results were coupled with literature data for binary systems Bi-Cu, Bi-Sn and Cu-Sn in order to obtain a thermodynamic description of the ternary liquid by use of the geometrical Muggianu approach.
PL
Metodą równowagowego nasycania wyznaczono aktywność bizmutu w stopach Bi-Cu-Sn w temperaturze 1373, 1423 I 1473K. Na podstawie uzyskanych wyników i danych literaturowych dotyczących stopów dwuskładnikowych Bi-Cu, Bi-Sn i Cu-Sn i stosując model Muggianu uzyskano opis termodynamiczny ciekłego stopu trójskładnikowego.
PL
Zbadano kinetykę siarkowania dwu- i trójskładnikowych stopów TiAl o składach: Ti-48Al, Ti-52Al-2Nb, Ti-51,2Al-5Nb, Ti-48,4Al-10Nb, Ti-45,9Al-15Nb i Ti-49Al-2Ag (%, at.) w temperaturze 900 stopni Celsjusza w parach siarki w zakresie ciśnień p(S2) od 10 do 1000 Pa. Stopy TiAl, TiAlNb i TiAlAg, otrzymane metodą mechanicznej syntezy (MS), miały budowę krystaliczną i zawierały dwie główne fazy: gamma-TiAl and alfa2-Ti3Al, o wielkości ziaren od około 0,2 do 1 mikrometra. Zidentyfikowano w nich również pewne ilości alfa-Ti oraz związków AlNb3 i Ag3Al. Siarkowanie stopów TiAlNb i TiAlAg w ww. warunkach przebiegało według prawa parabolicznego lub paraboliczno-liniowego w zależności od czasu reakcji siarkowania. Szybkość siarkowania wzrastała ze wzrostem zawartości niobu w zakresie od 2 do 15 % at. Nb. W przypadku stopu Ti-49Al-2Ag szybkość siarkowania była znacznie większa w porównaniu do stopu Ti-49Al-2Nb, co prawdopodobnie spowodowane było tworzeniem się ciekłej fazy Ag-Al. Zgorzeliny siarczkowe powstałe na międzymetalicznych fazach TiAlNb o zawartości niobu od 2 do 15% at. oraz na TiAl-2Ag były wielofazowe i składały się z trzech różnych warstw. Najbardziej zewnętrzna warstwa siarczkowa zbudowana była z Al2S3 z niewielką ilością siarczków tytanu. Następna warstwa składała się głównie z siarczków tytanu. Natomiast warstwa wewnętrzna zbudowana była z mieszaniny siarczków tytanu i siarczku glinu. W zgorzelinach tych zidentyfikowano następujące fazy siarczkowe: Al2S3, TiS, Ti3S4, TiS2 i Ti5S8, w zależności od warunków reakcji siarkowania (p(S2)=10/1000 Pa). Mikrostrukturę na przekrojach poprzecznych i skład fazowy produktów reakcji siarkowania badano metodą mikroskopii skaningowej (SEM), mikroanalizy rentgenowskiej (EDS) i dyfrakcji promieni rentgenowskich (XRD).
EN
The sulphidation behaviour of binary Ti-48Al and ternary Ti-52Al-2Nb, Ti-51.2Al-5Nb, Ti-48.4Al-10Nb and Ti-45.9Al-15Nb (at. %) alloys were studied in sulphur vapour atmosphere at 900 degrees centigrade in the pressure range of 10/1000 Pa. Binary TiAl and ternary TiAlNb, TiAlAg intermetallic alloys were prepared by mechanical alloying (MA) process. After annealing at 1250 degrees centigrade for 2 hrs in vacuum all three kinds of alloys were crystalline including two main phases gamma-TiAl and alpha2-Ti3Al with grain size in the range from about 0.2 to 1 micrometre. Some amounts of alpha-Ti, AlNb, and Ag3Al were also detected. In the present study the influence of niobum and silver additions to TiAl on the sulphidation kinetics, microstructure and chemical composition was investigated. Sulphidation of the TiAlNb and TiAlAg alloys in sulpur vapour atmosphere at 900 degrees centigrade in the pressure range of 10/1000 Pa followed a parabolic or parabolic-linear rate law depending on the time of reaction. The amounts of sulphidation increased with increasing addition of niobum in the range from 2/15 at. %. In the case of Ti-49Al-2Ag alloy sulphidation kinetics was much faster in comparison with other alloy compositions, caused probably by an Ag-Al liquid phase formation. The sulphide scales formed on TiAlNb with 2/15 at. % of Nb and TiAl-2 at. % Ag alloys had multi-layered structures of three different layers. It was observed that outermost sulphide layer is rich in Al2S3 with addition of some amount of Ti-sulphides and outer layer is rich in Ti-sulphides. The inner layer consisted of a mixture of Ti-sulphides and Al2S3. Ti-sulphides were represented by TiS, Ti3S4, TiS2, Ti5S8 depending on the sulphidation conditions, p(S2)=10/1000 Pa. The cross-sectional microstructure and phase composition of the reaction products were examined by scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS), and X-ray diffraction analysis (XRD).
PL
W pracy wytworzono stopy o następującym składzie chemicznym (% at.): TiAl48, TiAl45Cr5 i TiAl45V5. Syntezę stopów przeprowadzono metodą mechanicznego stopowania proszków czystych metali Ti (99 %), Al (99,5 %), Cr (99,95 %) oraz V (99,5%). Proces stopowania wykonano w laboratoryjnym atritorze typu Szegvari w atmosferze argonu. Komorę roboczą młyna chłodzono ciekłym azotem lub wodą. Stwierdzono, że wydłużenie czasu chłodzenia ciekłym azotem oraz dodatek pierwiastków Cr lub V prowadził do szybszego rozdrobnienia mikrostruktury mielonych proszków i skrócenia całkowitego czasu procesu mechanicznego stopowania. Badania przy użyciu trasmisyjnego mikroskopu elektronowego dowodzą, że wszystkie proszki, nawet po krótkim czasie mielenia, miały mikrostrukturę nanokrystaliczną. Wpływ chromu na przebieg procesu mechanicznego stopowania różni się od wpływu wanadu. Podczas mielenia w tych samych warunkach wanad przechodzi szybciej do roztworu stałego Ti(Al). Po procesie mechanicznego stopowania proszki konsolidowano przez prasowanie na gorąco. Obecność trzeciego pierwiastka (Cr lub V) wpływa znacząco na morfologię i dyspersję tlenków w materiale skonsolidowanym. W stopie dwuskładnikowym tworzą się stosunkowo duże tlenki, podczas gdy w stopach trójskładnikowych rozkład tlenków jest bimodalny, tj. pomiędzy tlenkami dużymi występuje drobny dyspersoid tlenkowy o wielkości rzędu kilku nanometrów.
EN
Alloys with chemical compositions of TiAl48, TiAl45Cr5 and TiAl45V5 (% at.) were synthesized by mechanical alloying in a Szegvari-type attritor. The elemental powders of Ti (99 % pure), Al (99,5 % pure), Cr (99,95 % pure) and V (99,5 % pure) were used for the synthesis. The process was carried out in an argon atmosphere. The milling chamber was cooled during the process by liquid nitrogen or water. It was found that prolongation of cooling by liquid nitrogen as well as alloying by Cr or V results in faster refinement of microstructure of the milled powders and makes a reduction in the total time of mechanical alloying. Investigation by means of a transmission electron microscope revealed that all powder particles, even after short processing times, exhibit nanocrystalline microstructure. An influence of chromium on the course of the mechanical alloying process differs from an influence of vanadium. At the same processing parameters vanadium dissolves faster in titanium than chromium does. After the mechanical alloying process the powders were compacted by hot pressing. The presence of the third element (Cr or V) exerts an influence on morphology and dispersion of oxides in the consolidated material. In the TiAl48 binary alloy oxide particles are relatively big while in the ternary alloys oxide size exhibit a bimodal distribution, i.e. among large oxide particles small, on the order of nanometer size, particles were found.
PL
Przedstawiono uogólnioną metodę Darkena dla układów wieloskładnikowych. Podstawą metody jest postulat, iż strumień masy każdego ze składników stanowi sumę strumienia dyfuzyjnego i strumienia unoszenia (dryftu). Odpowiednie warunki brzegowe oraz dowolne w zasadzie warunki początkowe pozwalają na badanie złożonych procesów dyfuzji wzajemnej w stopach wieloskładnikowych, nieidealnych. Badania dyfuzji wzajemnej dla układu Cu-Fe-Ni przeprowadzono w temperaturze 1273 K. Do badań wybrano relatywnie prosty układ trójskładnikowy. Trzeba jednak zaznaczyć, że pomimo swej prostoty roztwory stałe w układzie Cu-Fe-Ni nie są idealne. Siłami napędowymi w układach nieidealnych są gradienty potencjałów chemicznych poszczególnych składników (lub gradienty aktywności), które można otrzymać z uzyskanych eksperymentalnie profili stężeniowych przy znanych danych termodynamicznych układu. Istotą zaproponowanego w niniejszej pracy opisu dyfuzyjnego transportu masy jest wyrażenie na strumień dyfuzyjny (równanie Plancka), które pozwala uwzględnić termodynamiczne siły napędowe dyfuzji w badanym układzie. Zaprezentowano metodę obliczania dróg dyfuzji z uwzględnieniem zależnych od stężenia współczynników dyfuzji wzajemnej. Rezultaty uzyskane na bazie uogólnionej metody Darkena porównano z wynikami otrzymanymi na podstawie innych modeli dyfuzji wzajemnej.
EN
The generalized Darken method for multicomponent interdiffusion is presented. The method is based on the postulate that the total mass flow is a sum of the diffusion and the drift fluxes. The proper boundary conditions and arbitrary initial distribution allow us to describe the complex diffusional transport process in a multicomponent systems. This paper is based on studies of diffusion couples in the Cu-Fe-Ni system at 1273 K. The alloys in this system do not form ideal solid solutions. The driving force for diffusion in such a ternary system is the gradient of the chemical potential which can be calculated from the concentration profiles and with the use of the known thermodynamical data of the system. The essence of this method is the expression for the diffusional flux (Planck's equation) which makes it possible to take the thermodynamical driving forces into account. The diffusion paths are discussed in the light of the variable interdiffusion coefficients with the use of the generalized Darken method. A comparison of the generalized Darken method and other models is presented.
PL
W oparciu o model utleniania stopów dwuskładnikowych typu Ni-Pt, Wagnera oraz uogólnioną metodę dyfuzji wzajemnej Darkena (GDM) przeprowadziliśmy symulacje selektywnego utleniania stopów wieloskładnikowych. Uzyskane rozwiązanie pozwala badać ewolucje rozkładów koncentracji składników w układach zamkniętych i otwartych dla dowolnych warunków początkowych i brzegowych. Wykazaliśmy przydatność prezentowanej metody w obliczaniu zmian koncentracji składników przy powierzchni stopIzgorzelina (które są efektem reakcji na powierzchni stopu). Wykonane symulacje dyfuzji wzajemnej w selektywnie utlenianym stopie (Fe-48 Cr) i selektywnie siarkowanym stopie trójskładnikowym (Fe-18Cr-9Ni w % wag.) wykazują zadowalającą ilościową zgodność z wynikami eksperymentalnymi.
EN
The Wagner model of oxidation of binary Ni-Pt type alloys and the Generalized Darken Method of Interdiffusion (GDM) are combined to describe the selective oxidation of multicomponent alloys. The solution of the GDM enables one to obtain an exact expression for the evolution of component distributions in closed and open systems, for arbitrary initial distributions and time dependent boundary conditions. We show the usefulness of the presented method in estimating the changes of density of elements at the alloyIscale interface (a result of reaction at the interface). The simulations of the interdiffusion in selectively oxidized binary (Fe-48Cr) and selectively sulphidized ternary (Fe-18Cr-9Ni in wt.%) alloys show the qualitative agreement with the experimental results.
EN
Studies were carried out on the Portevin-Le Chatelier (PLC) effect in binary, ternary and quarternary Al-Li alloys and in the commercial 8090 alloy. The correlation between the serration characteristic, the rolling degree and the straining orientation has been analysed. The fact that the presence of the Cu-containing precipitates intensifies the PLC effects suggests, that these are primarily related to the interactions between the dislocations and the semi-coherent T1(Al2CuLi) precipitates. The analysis of the PLC effect in AlLi alloys shows that the serrations in the stress-strain curve exhibit a profund degree of anisotropy. Most pronounced PLC effects are observed along the rolling and transverse directions.
PL
Analizie poddano zjawisko Portevin-Le-Chatelier (PLC) w modelowych (dwu-, trój- i czteroskładnikowym) oraz przemysłowym (8090) stopie na osnowie Al-Li. Badano zależność pomiędzy charakterem oscylacji a stopniem zgniotu i anizotropią blach. Obecność w mikrostrukturze badanych stopów wydzieleń zawierających Cu wzmacniających zjawisko PLC sugeruje, że jest ono głównie związane z oddziaływaniem pomiędzy dyslokacjami a półkoherentnymi wydzieleniami T1(Al2CuLi). Analiza zjawiska PLC w stopach na osnowie Al-Li wykazała, że oscylacje na krzywej rozciągania charakteryzują się dużym stopniem niejednorodności. Najintensywniejsze efekty PLC zaobserwowano w próbkach wyciętych wzdłuż kierunku walcowania i kierunku poprzecznego blachy.
PL
Stop podwójny na osnowie fazy gama-TiAl o składzie chemicznym Ti-48Al oraz potrójne Ti-48,4Al-4,1Mn i Ti45,4Al-10Mn (liczby przed symbolem pierwiastka oznaczają % at.) poddano mechanicznej syntezie (MS) w wysokoenergetycznym młynie planetarnym typu Fritsch Pulverisette P5/4. MS przez okres 40 godzin spowodowała rozdrobnienie wyjściowych cząstek proszków do wielkości średniej około 8 mm oraz ujednorodnienie ich kształtu. Mechanizm rozdrabniania wieloskładnikowych cząstek oparty był na pracy utwardzenia oraz pękaniu w miejscach wzbogaconych w tytan. Dodatek manganu tylko w pierwszych etapach procesu wpływał na strukturę cząstek, powiększając ich wielkość poprzez lokowanie się w plastycznej osnowie aluminiowej. Badania przy użyciu dyfrakcji promieni rentgenowskich wykazały, że we wszystkich stopach nastąpiło utworzenie struktury amorficznej oraz roztworu stałego typu alfa-Ti(Al) oraz obserwowano tylko częściową rozpuszczalność manganu. Stosując metodę dopasowania stwierdzono, że względny udział fazy amorficznej po 40 godzianch mielenia w stopie Ti48Al wynosił 70%, podczas gdy w stopach Ti-48,4Al-4,1Mn i Ti-45,4Al-10Mn odpowiednio 72 i 78%. Prasowanie na gorąco proszków po procesie MS w temperaturze 1000 stopni Celsjusza pod ciśnieniem 35 MPa prowadziło do uzyskania materiałów litych o gęstości od 95-98% gęstości teoretycznej. Mikrostruktura próbek składała się z trzech oddzielnych stref różniących się morfologią i składem chemicznym, spowodowane to było dyfuzją węgla od grafitowej matrycy do próbki i tworzeniu TiC na jej powierzchni zewnętrznej. Strefy różniły się również porowatością, która malała w kierunku osi próbki. Wyżarzanie w próżni sprasowanych oraz dodatkowo obrobionych mechanicznie w celu zlikwidowania budowy strefowej w temperaturze 1300 stopni Celsjusza (stop podwójny) oraz 1250 stopni Celsjusza (stopy potrójne) spowodowało powstawanie struktur wielofazowych o średniej wielkości ziaren około 10 mm. W stopie podwójnym Ti-48Al występuje płytkowa dwufazowa struktura alfa2+gama(Ti3Al+TiAl) oraz drobne wydzielenia roztworu stałego alfa-Ti(Al). W stopach z dodatkiem manganu również przeważającą jest faza gama-TiAl, a dodatkowo występowały fazy alfa2-Ti3Al, Ti9Al23 oraz faza typu Lavesa Al17Mn50Ti33.
EN
The binary and ternary gamma-TiAl phase based alloys i.e. Ti-48Al., Ti-48.4Al-4.1Mn and Ti-45.4Al-10Mn alloys (in at. %) were mechanically alloyed (MA) in high energetic mill Fritsch Pulverisette P5/4. After 40 hours of milling the refinement of initial powder particle down to 8 micrometres and change of to close to spherical shape was observed. The refinement mechanism of multicomponent particles is based on the work hardening and fracture in places locally enriched in titanium. The addition of manganese increases the mean particle size in the first period of milling, as compare to binary Ti-48Al powder due to location of manganese particle in ductile aluminium matrix. The X-ray diffraction of these alloys showed that 40 hours of MA produces a mixture of amorphous and crystalline a-Ti(Al) solid solution phases containing manganese. The profile fitting procedure for quantitative analyse of diffraction curves showed that a fraction of the amorphous phase in powders was 70% in Ti-48Al alloy, 72% in Ti-48.4Al-4.1Mn and 78% in Ti-45.4Al-10Mn after 40 hours of milling. Hot pressing consolidation of these powders at 1000 degrees centigrade under 35MPa caused their densification up to 95-98% of theoretical density. In hot pressed samples three zones of different structure and phase composition were observed, due to the effect of carbon diffusion from the mould, causing TiC formation in the outer zone. The zones differ also in amount of pores, which decrease toward the centre of sample. The vacuum annealing at 1300 degrees centigrade (binary alloy) and at 1250 degrees centigrade (ternary alloys) of hot pressed samples with removed surface zones caused formation of multiphase structures with average grain size of about 10 mm. The binary Ti-48Al was characterized by two phase layered alpha2+gamma(Ti3Al+TiAl) structure and fine precipitates of alpha-Ti(Al) solid solution. In ternary alloys gamma-TiAl phase exists as a matrix and additional alpha2-Ti3Al, Ti9Al23 and Al17Mn50Ti33 phases were observed.
PL
Badano nowy rodzaj stopów, wykazujących pamięć kształtu w wysokich temperaturach, opracowanych na bazie trójskładnikowego stopu Cu-Al-Nb. Wprowadzenie do stopu trójskładnikowego chromu, a szczególnie niklu i kobaltu daje możliwość obniżenia zakresu temperaturowego odwracalnej przemiany martenzytycznej. Jednakże, pierwiastki te powodują wydzielanie w martenzytycznej osnowie faz międzymetalicznych takich jak AlCo i NiAl oraz zmiany w składzie chemicznym fazy Nb(Al,Cu)2 - głównej fazy występującej w stopie trójskładnikowym. Obecność tych cząstek wpływa na zmiany własności mechanicznych oraz zjawisko pamięci kształtu badanych stopów.
EN
New type of Cu-Al-Nb base alloys containing additionally nickel, cobalt and chromium and showing high martensitic transformation temperatures has been developed. In this paper the temperatures of reversible martensitic transformation, mechanical properties and shape memory characteristics of these alloys are presented. Introducing chromium and specially nickiel and cobalt to the Cu-Al-Nb alloys gives a possibility to decrease the characteristic temperatures. However, these elements create in the martensitic matrix primary particles of intermetallic phases such as AlCo and NiAl and change the chemical composition of the Nb(Al,Cu)2-the main phase in the ternary Cu-Al-Nb alloy. Presence of precipitates results in change of the mechanical properties of these alloys.
EN
There is increasing interest in the synthesis of aluminium-based alloys by mechanical alloying (MA). These materials possess a high specific strength and in high temperature applications, exhibit attractive mechanical properties. The aim of this work was to study the structural and phase transformations that take place during mechanical alloying of the ternary Al50Fe25Ti25 alloy in a high energy planetary ball mill. Two experiments were performed: one with an addition of ethanol and the other without any additional agent. The nanocrystalline composite powder, consisting of titanium carbide distributed in the Fe(Al) matrix was the final product of the process performed with the addition of ethanol. After milling without any agent an amorphous phase was observed to form. When this phase was then subjected to heating in a calorimeter the ternary phase tau2(Al2FeTi) and Fe(Al, Ti) solid solution appeared.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.