This paper studies innovative application of sliding mode control (SMC) for a Hybrid Renewable Energy System (HRES) in grid-connected and autonomous modes of operation. The considered HRES includes a photovoltaic (PV), wind turbine (WT) based on a Permanent Magnet Synchronous Generator (PMSG). The PV generator is coupled to the common DC bus via a DC/DC converter. The latter is controlled by an MPPT algorithm based on the Adaptive Perturbation and Observation Algorithm Method (APOAM) to search the optimum working of this source. A SMC is utilized to manage the PV voltage to achieve the Maximum Power Point (MPP) by altering the obligation duty cycle. The battery interfaced by a bidirectional buck-boost DC/DC converter can be charged or discharged depending on the production situation. On the one hand, the wind turbine conversion chain is equipped with a PMSG and a rectifier controlled to regulate the operating point of the wind turbine to its optimum value. During a Stand-Alone Mode (SAM) operation, the Voltage Source Converter (VSC) was used for controlling the output voltage in terms of amplitude and frequency delivered to the AC load. However, in Grid-Connected Mode (GCM) operation, the VSC was adapted to control the electrical parameters of the grid. To better appreciate the advantages of the proposed SMC approach, we have proposed a series of comparative tests with the conventional PI control in the operating modes GC and SA and under different scenarios. The proposed control strategy has undeniable advantages in terms of control performance and very low total harmonic distortion THD value compared with the conventional PI control. Finally, It is concluded that the proposed approach improves the quality and provides a stable operation of the HRES.
2
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
This paper presents control of a three-phase DC/AC converter with grid monitoring algorithm applied to Small Wind Turbine (SWT). Monitoring through voltage amplitude and frequency measurement detect electrical grid faults and automatically change the grid-connected/standalone mode of operation. Inverse transition stand-alone/grid-connected is preceded by synchronization of DC/AC converter to electrical grid with the help of special Phase Locked Loop (PLL) block.
PL
Poniższy artykuł opisuje sterowanie trójfazowym przekształtnikiem DC/AC z algorytmem monitorowania sieci elektroenergetycznej do zastosowania w Małej Elektrowni Wiatrowej (MEW). Algorytm monitorujący amplitudę oraz częstotliwość napięcia sieci wykrywa awarię sieci elektroenergetycznej i automatycznie przełącza tryb pracy elektrowni z pracy z siecią elektroenergetyczną do pracy autonomicznej. Natomiast przełączenie z pracy autonomicznej do pracy elektrowni z siecią elektroenergetyczną następuje po uprzedniej synchronizacji przekształtnika DC/AC z siecią elektroenergetyczną za pomocą pętli synchronizacji fazowej (PLL).
3
Dostęp do pełnego tekstu na zewnętrznej witrynie WWW
Artykuł omawia zagadnienia sterowania przekształtnikiem DC/AC pośredniczącym w przekazywaniu energii elektrycznej wyprodukowanej przez małą elektrownię wiatrową (MEW) do sieci elektroenergetycznej nn. lub odbiorników lokalnych.
EN
Paper presents control methods for a DC/AC converter working in a grid connected or a stand-alone mode and transferring energy from a small wind turbine to the electrical grid or autonomous local grid.
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.