Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 11

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  specific absorption rate
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This paper proposes a slotted patch antenna with wide bandwidth covering ISM frequency band (2.40-2.48 GHz) for implantable biotelemetry applications. A homogeneous skin phantom (HSP) model proves the usability of the proposed antenna in in-body environments. At a resonance frequency of 2.42 GHz, the design shows an S11 parameter of -35.56 dB, a percentage impedance bandwidth of 66.6% (2-4 GHz), and the maximum peak gain of -24.80 dBi. To validate the simulated results, the designed antenna was fabricated and measured, showing good compliance with the expected results. To ensure tissue safety, a specific absorption rate (SAR) is simulated for the proposed antenna which satisfies the requirements of IEEE standards, with a value of 87.75 W/kg for 10 g of tissue. The proposed antenna shows a telemetry range of 11 and 6.3 m at 7 kbps and 100 kbps data rates, respectively. The key features of the proposed antenna include the following: miniaturization, good S parameters, wide bandwidth, low SAR, good telemetry range, and high gain.
EN
The paper presents a numerical electromagnetic simulations of SAR limited to human tissues based on FDTD algorithm using Sim4Life platform. Flat-bottomed dielectric vessel (flat phantom) and half-wave symmetric dipole antenna were modeled. Simulations were done for the frequencies 0.9 GHz and 0.6 GHz. The analysis were performed according to the IEEE/IEC62704-1 standard and include distributions of electric and magnetic fields around the phantom and antenna. Finally, SAR distributions in the phantom and near the antenna.
PL
W pracy przedstawiono numeryczne symulacje elektromagnetyczne SAR dla tkanek ludzkich w oparciu o algorytm FDTD z wykorzystaniem platformy Sim4Life. Zamodelowano płaskodenny dielektryk (fantom płaski) oraz półfalową symetryczną antenę dipolową. Symulacje wykonano dla częstotliwości 0.9 GHz i 0.6 GHz. Analizy zostały wykonane zgodnie ze standardem IEEE/IEC62704-1 i obejmują rozkłady pól elektrycznych i magnetycznych wokół fantomu i anteny. Na koniec zaprezentowano rozkłady SAR w fantomie i pobliżu anteny.
EN
Magnetic nanoparticle’s different applications in nanomedicine, due to their unique physical properties and biocompatibility, were intensively investigated. Recently, Fe₃O₄ nanoparticles, are confirmed to be the best sonosensitizers to enhance the performance of HIFU (high intensity focused ultrasound). They are also used as thermo-sensitizers in magnetic hyperthermia. A new idea of dual, magneto-ultrasound, coupled hyperthermia allows the ultrasound intensity to be reduced from the high to a moderate level. Our goal is to evaluate the enhancement of thermal effects of focused ultrasound of moderate intensity due to the presence of nanoparticles. We combine experimental results with numerical analysis. Experiments are performed on tissue-mimicking materials made of the 5% agar gel and gel samples containing Fe₃O₄ nanoparticles with φ  = 100 nm with two fractions of 0.76 and 1.53% w/w. Thermocouples registered curves of temperature rising during heating by focused ultrasound transducer with acoustic powers of the range from 1 to 4 W. The theoretical model of ultrasound-thermal coupling is solved in COMSOL Multiphysics. We compared the changes between the specific absorption rates (SAR) coefficients determined from the experimental and numerical temperature rise curves depending on the nanoparticle fractions and applied acoustic powers.We confirmed that the significant role of nanoparticles in enhancing the thermal effect is qualitatively similarly estimated, based on experimental and numerical results. So that we demonstrated the usefulness of the FEM linear acoustic model in the planning of efficiency of nanoparticle-mediated moderate hyperthermia.
PL
Przedstawiono aktualny stan wiedzy z zakresu radiowych sieci BAN. w tym zagadnienia podstawowe (tj. definicję radiowych sieci BAN, ich klasyfikację i dostępne pasma częstotliwości), właściwości elektryczne ciała człowieka, zagadnienia warstwy fizycznej oraz zagadnienia antenowe. Zaprezentowano również możliwe źródła zasilania, zagadnienia bezpieczeństwa danych i bezpieczeństwa człowieka, a także omówiono zastosowania tych sieci wraz z wymaganiami im stawianymi.
EN
The article presents the current state of knowledge in the field of Wireless Body Area Networks, including basic issues (i.e. the definition of WBAN, classification and available frequency bands), the electrical properties of the human body, physical layer and antenna issues. The possible power sources, as well as data security and human safety have been presented. The applications of WBAN networks and requirements have been discussed.
PL
W pracy opisano symulację wartości chwilowych SAR w przypadku jednorodnego modelu głowy poddanego działaniu pól emitowanych przez antenę pobudzoną impulsami prądowymi o kształcie funkcji Gaussa i jej pierwszej pochodnej. Rezultaty stosunkowo krótkich i nieskomplikowanych obliczeń są porównywalne z otrzymanymi dla modeli warstwowych.
EN
In this work one described the simulation of the temporary value of Specyfic Absorption Rate in the case of the homogeneous model of the human head exposed to fields produced by the antenna with short pulse excitation. Results of comparatively short and simple calculations are comparable with received for complex stratified models.
EN
The door to a microwave oven forms part of the heating cavity, allowing access to the oven interior and preventing leakage of microwaves outside the oven during its operation. The seal around the door is never perfect, so electromagnetic fields will leak out of the oven, potentially interfering with other electrical equipment or exceeding safety limits for power levels in human operators. Oven designs have to meet legal requirements for the amount of power which can leak beyond a certain distance from the oven (due to human exposure concerns), and also have to meet electromagnetic compatibility (EMC) requirements. This article discusses how electromagnetic simulation can be used to design effective shielding mechanisms in order to adhere to these standards.
PL
Drzwiczki kuchenki mikrofalowej tworzą część wnęki grzejnej, umożliwiając dostęp do jej wnętrza i zapobiegając wydostawaniu się mikrofal na zewnątrz kuchenki w trakcie jej eksploatacji. Niedoskonałości uszczelnienia na obwodzie drzwi sprawiają, że pole elektromagnetyczne wycieka z kuchenki, zakłócając inne urządzenia elektroniczne lub powodując przekroczenia limitów bezpieczeństwa dla poziomów mocy dopuszczalnych dla ludzi. Konstrukcja kuchenki musi spełniać wymogi prawne co do gęstości energii mikrofal w określonej odległości od urządzenia z uwagi na narażenie dla obsługi, a także musi spełniać wymagania kompatybilności elektromagnetycznej (EMC). W tym artykule opisano zastosowanie symulacji elektromagnetycznych do projektowania skutecznych rozwiązań ekranujących, pozwalających spełnić wymagania wynikające z odpowiednich norm.
PL
Artykuł prezentuje dotyczące użytkowników radiotelefonów zagrożenia bezpieczeństwa i zdrowia, wynikające z oddziaływania pola elektromagnetycznego na ludzi i środowisko pracy oraz działania profilaktyczne służące ich ograniczaniu. Urządzenia te są powszechnie używane do realizacji obowiązków zawodowych m.in. przez pracowników pogotowia ratunkowego, straży pożarnej, policji.
EN
This paper shows safety and health hazards related to electromagnetic fields interaction with human body and preventive actions for their limitations among users of radiophones. Such device; are commonly used to perform working activities e g. by workers of Medical Rescue, State Fire Service and Police services.
8
EN
In the paper the way of computations of electromagnetic field scattering in a numerical model of human head is demonstrated. The work presents a structure of a model based on the MRI (Magnetic Resonance Image). In the parallel program, which is used in the computations, the FDTD (Finite-Difference Time-Domain) method was implemented. The software was applied in the three-node cluster of workstations (COW).
PL
W niniejszym artykule przedstawiono metodę obliczania propagacji pola elektromagnetycznego w anatomicznym modelu głowy ludzkie. W pracy przedstawiono strukturę badanego modelu opartego na obrazach, otrzymanych metodą rezonansu magnetycznego (MRI). Do obliczeń wykorzystano program równoległy, zaimplementowany w sieci klaster, opartej na trzech węzłach, który opracowano na podstawie metody różnic skończonych w dziedzinie czasu FDTD (Finite-Difference Time-Domain
EN
The following paper presents the procedure of the SAR (Specific Absorption Rate) determination distribution used by the authors. In order to conduct it, the FDTD (Finite-Difference Time-Domain) method was used. Its parallel version working on a cluster system was implemented. Computations of the SAR coefficient and the temperature increase were based on numerical model of human head consisting of eleven tissues. Conclusions contains the comparison of the achieved results with those of other authors’.
PL
W artykule przedstawiono wykorzystaną przez autorów publikacji procedurę wyznaczania rozkładu SAR (Specific Absorption Rate). W tym celu posłużono się metodą FDTD (Finite-Difference Time-Domain), którą zaimplementowano w wersji równoległej pracującej w sieci komputerów klaster. Przeprowadzone doświadczenia obliczania współczynnika SAR oraz przyrostu temperatury oparto na modelu głowy ludzkiej, zbudowanej z jedenastu tkanek. W podsumowaniu przedstawiono porównanie otrzymanych wyników z badaniami innych autorów.
EN
A calorimetric study of the magnetic fluid APG-832 subjected to an alternating magnetic field has been performed. The results have permitted a determination of the specific absorption rat, expressed per the mass unit of the ferrimagnetic contained in the ferrofluid studied. In order to determine the polydispersity of magnetic grains and other parameters of the sample, it was subjected to the measurements by the vibrating sample magnetometer and observations under a transmission electron microscope.
EN
A hybrid method is proposed for specific absorption rate analysis in a human body located in the near field of typical GSM base-station panel antenna. The method combines FDTD technique with analytical description of the near field of isolated antenna. The approximate results are found to be in excellent agreement with the results obtained by using the traditional FDTD. The most important advantage of proposed approach is minimization of computer memory requirements and computation time.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.