Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników
Powiadomienia systemowe
  • Sesja wygasła!

Znaleziono wyników: 6

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  skuteczność usuwania
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This paper presents investigations on the removal of cyclohexane and ethanol from air in polyurethane- -packed biotrickling filters, inoculated with Candida albicans and Candida subhashii fungal species. Results on process performance together with flow cytometry analyses of the biofilm formed over packing elements are presented and discussed. The results indicate that the presence of ethanol enhances the removal efficiency of cyclohexane from air. This synergistic effect may be attributed to both co-metabolism of cyclohexane with ethanol as well as increased sorption efficiency of cyclohexane to mineral salt medium in the presence of ethanol. Maximum elimination capacities of 89 g m-3 h-1 and 36.7 g m-3 h-1 were noted for cyclohexane and ethanol, respectively, when a mixture of these compounds was treated in a biofilter inoculated with C. subhashii. Results of flow cytometry analyses after 100 days of biofiltration revealed that about 91% and 88% of cells in biofilm remained actively dividing, respectively for C. albicans and C. subhashii species, indicating their good condition and ability to utilize cyclohexane and ethanol as a carbon source.
PL
W pracy przedstawiono badania nad usuwaniem cykloheksanu i etanolu z powietrza w boifiltrach zraszanych, wypełnionych pianką poliuretanową, zasiedloną grzybami z gatunku Candida albicans i Candida subhashii. Przedstawiono i omówiono wyniki dotyczące wydajności procesu (na podstawie pomiarów techniką chromatografii gazowej) wraz z wynikami cytometrii przepływowej dla utworzonego biofilmu. Uzyskano wartości zdolności usuwania, wynoszące około 89 g m-3 h-1 i 36.7 g m-3 h-1, odpowiednio dla cykloheksanu i etanolu, gdy te związki jednocześnie poddawano procesowi biofiltracji w biofiltrze zaszczepionym Candida subhashii. Wyniki wskazują, że obecność etanolu powoduje zwiększenie skuteczności usuwania cykloheksanu z powietrza. Wzrost skuteczności usuwania z powietrza cykloheksanu w obecności etanolu może wynikać z polepszonego metabolizmu cykloheksanu w takich warunkach oraz z ograniczenia bariery dla przenikania masy, wskutek lepszych właściwości sorpcyjnych cieczy zraszającej wobec cykloheksanu w obecności etanolu.
EN
The aim of the research was to compare selected coagulants efficiency in indicator and chosen dioxin-like PCB removal from surface water. As coagulants, there were used aluminium sulfate and 5 hydrolyzed polyaluminium chlorides, with trade names: PAX-XL1, PAX-XL10, PAX-XL19, PAX-XL60, PAX-XL69. For the research, surface water was used, collected from dam reservoir. The water composition was modified with standard mixtures PCB MIX24 and MIX13, in order to obtain concentration of each congener equal to 300 ng/dm3. The PCB MIX24 mixture was composed of indicator congeners solution: 28, 52, 101, 118, 138, 153, and 180, whereas the MIX13 mixture - solution of three dioxin-like PCB 77, PCB 126, and PCB 169. It was demonstrated that the application of aluminium sulfate allowed for reaching better effects for purifying water of PCB, than with the usage of pre-hydrolyzed salts, polyaluminium chlorides. Out of the studied coagulants, the best effects for indicator PCB removal were obtained with the application of aluminium sulfate, total PCB concentration was decreased by 65%. The highest efficiency for indicator congeners removal (90%) was obtained for PCB 138 and 153. After the application of hydrolyzed polyaluminium chlorides PAX-XL1, PAX-XL10 decrease in higher chlorinated PCB concentration was obtained, in the range of 23 to 74%. Selectivity of chosen PCB congener removal, depending on applied coagulant, was demonstrated; with the usage of aluminium sulfate, removal of heptachlorobiphenyl PCB 180 at the level of 34% was obtained, whereas with the application of PAX-XL1 and PAX-XL10 higher reduction efficiency for this congener was obtained, i.e. 83 and 74% respectively. For dioxin-like PCB, after application of aluminium sulfate, total concentration reduction by 74% was obtained, efficiency of this congeners removal amounted to from 54 (PCB 77) up to 72% (PCB 126), similar results were obtained after the usage of PAX-XL1. The lowest PCB removal from water rate was stated for coagulants PAX-XL60 and PAX-XL69.
EN
Bioconversion of H2S into elemental sulfur has been investigated using an airlift bioreactor with direct injection of the gas into the bioreactor. Almost complete removal of H2S has been achieved at its inlet concentrations lower than 25 000 ppm. Maximum bioconversion capacity of ca 111.3 g/(m3·h) and up to 93.5% conversion of the inlet sulfide to elemental sulfur was obtained. To further improve the bioreactor performance, factors influencing mass transfer and biological activity should be investigated in future studies.
PL
Przedstawiono wyniki badań, których celem była analiza biodegradowalności odcieków składowiskowych oczyszczanych w wielostopniowym systemie hydrofitowym. Zastosowano układ technologiczny składający się z dwóch złóż o przepływie podpowierzchniowym pionowym oraz złoża o przepływie podpowierzchniowym poziomym. Podatność odcieków składowiskowych na rozkład biologiczny oceniano przez pomiar ChZT i jego frakcjonowanie, w odciekach po kolejnych etapach oczyszczania. Badania prowadzono w dwóch etapach: w pierwszym złoża zasilano odciekami składowiskowymi, natomiast w etapie drugim mieszaniną odcieków składowiskowych i ścieków bytowych. W obu etapach stwierdzono bardzo wysoki udział frakcji nierozkładalnych (Si oraz Xi) w odciekach doprowadzanych do pierwszego złoża, wynoszący 72,8% dla odcieków składowiskowych oraz 53,6% dla odcieków zmieszanych ze ściekami. W obu etapach badań bardzo niskie były wartości frakcji rozpuszczonej rozkładalnej na drodze biologicznej (Ss). Wartości frakcji rozkładalnych na drodze biologicznej obniżały się po kolejnych złożach. Odcieki odpływające z oczyszczalni hydrofitowej zawierały niemal wyłącznie substancję organiczną w formie niepodatnej na rozkład biologiczny. Stwierdzono wpływ jakości substancji organicznej (zawartości frakcji inertnych oraz podatnych na rozkład biologiczny oraz ilorazu BZT5/ChZT) na efektywność usuwania ChZT. Usuwanie ChZT przebiegało z wyższą skutecznością w okresie, kiedy odcieki zawierały dodatek ścieków bytowych. Potwierdza to, że dodatek labilnej materii organicznej korzystnie wpływa na efektywność oczyszczania odcieków w procesach biologicznych.
EN
In the article the results of analyses of biodegradability of landfill leachate treated in a multi-stage constructed wetland are presented. The treatment system consisted of two subsurface vertical flow beds followed by a subsurface horizontal flow bed. The biodegradability of leachate was evaluated by measurement of COD and COD fractions after subsequent stages of treatment. The research was conducted at two stages: in the first stage the beds were fed with pure leachate, while in the second stage the leachate was mixed with sanitary sewage. At both stages very high share of inert (not biodegradable) fractions (Si and Xi) was measured in the raw leachate discharged to the first bed (72.8% in the first stage and 53.6% in the second stage). Also at both stages the share of soluble biodegradable fraction Ss was very low. The shares of Ss fraction decreased after subsequent beds. At the outflow the leachate contained organic matter only in the inert form, resistant to biological treatment. It was found out that organic matter quality (the content of inert fractions and BOD/COD ratio) influenced the COD removal efficiency. The COD was more effectively removed in the second research stage which confirms that addition of sanitary sewage improves treatment efficiency of landfill leachate.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.