Wyniki wyszukiwania - BazTech

Ograniczanie wyników

Znaleziono wyników: 3

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: shear span

Sortuj według:

Ogranicz wyniki do:

Effect of shear span-to-depth ratio on behavior of sandwich core steel girder with corrugated web

Abdullah Mazin D., Muhaisin Muthana H., Ammash Haider K.

Przegląd Naukowy Inżynieria i Kształtowanie Środowiska

2022

Vol. 31, No. 2

79--87

Girders with corrugated steel web are preferred and widely used in recently constructed bridges and industrial buildings. Sandwich core girders with corrugated web are constructed by adding two plates (skins) to the corrugated web. This study aims to investigate the shear span-to-depth ratio impact on the performance of sandwich core steel girders with corrugated web. Three span-to-depth ratios (a/d): 1.0, 1.833 and 2.5, were examined. The test includes three girders with sandwich web thickness of 30 mm, three girders with 60 mm sandwich web thickness, and three girders with conventional flat webs. A total of nine simply supported steel girders subjected to a concentrated load were fabricated and tested up to failure. The responses of the examined girders are presented in term of the load deflection curves, the ultimate load, and the maximum displacement. Among the conclusions drawn in this study that girders with sandwich core thickness of 30 mm demonstrate higher ultimate load capacity than girders with sandwich core of 60 mm, the maximum difference in the ultimate load capacity was about 20% and can be seen at a/d equals to 1.0. The results also pointed out that the behavior of the beams was noticeably impacted by the shear span-to-depth ratio.

Longitudinal shear in composite deck slabs using corrugated steel sheets

Alkurayshi Hakim S. M., Jawad Adnan K., Dawood Alaa M., Hakim S. Ahmed

Przegląd Naukowy Inżynieria i Kształtowanie Środowiska

2021

Vol. 30, No. 3

411--423

Profile deck steel sheets are used in composite deck slabs. These sheets are standard in dimensions and shapes besides they are supplied with embossments and indentations. Such sheets are not available in Iraqi markets nowadays therefore people used another type of sheets which are corrugated without embossments or indentations in very wide range. This study covers the use of such sheets in composite slabs as decks instead of standard profiled steel sheets. The study comprises testing slabs of dimensions 0.9 × 2.5 m reinforced by steel fabric mesh and rested on corrugated sheets. Two types of shear spans are selected shorter and longer to study the longitudinal shear force transmitted due to the applied loads according to the Eurocode 4. The shorter shear spans are 600, 500 and 400 mm while longer one is 800, 750 and 700 mm. The study extended to support the requirements of design equation of the Eurocode by shear bond method also known as m–k method. The evaluated values of m and k are 0.094 and 65 respectively. The result of k which plays a very important role in shear transfer is small compared to what available in literature, therefore it is recommended to make use of shear connectors in such construction or any else method.

Improvement method of calculation reinforced concrete beams on the shear strengthened FRCM system

Blikharskyy Zinoviy, Vegera Pavlo, Vashkevych Rostyslav, Khmil Roman

System Safety : Human - Technical Facility - Environment

2020

Vol. 2, nr 1

215--222

Determination of shear-load-bearing capacity of reinforced concrete beams (according to the current normative documents), comprises particular recommended values, which do not depend on the parameters of the sample or load. This article de-scribes the methodology for determination the shear strength with suggestions for calculation the coefficient CRd,c and compressed element tilt angle Ѳ while reinforced concrete elements` calculation with the use of “truss model”. In order to confirm the methodology 4 reinforced concrete beams were tested. Tests were performed in order to investigate each particular inclined section separately. Variable parameter was the relative shear span a/d, with its values a/d=2, a/d=1,5 and a/d=1. Another parameter was the usage of composite strengthening system, made for relative shear span a\d=2. Samples were tested as single-span beams subjected to short-term loading. The calculation with the use only the values, given in norms showed significant divergence of results. Using the refined parameter values provided the convergence of results within 16-29% toward overestimation of the experimental data. The composite reinforcement system calculation showed the overestimation of 23%, which is within the same limits as for the control samples.