Wyniki wyszukiwania - BazTech

Ograniczanie wyników

3 Archives of Foundry Engineering

Znaleziono wyników: 3

Liczba wyników na stronie

Wyniki wyszukiwania

Wyszukiwano:
w słowach kluczowych: salt cores

Sortuj według:

Ogranicz wyniki do:

Development of Water-Soluble Composite Salt Sand Cores Made by a Hot-Pressed Sintering Process

Yang Xiaona, Zhang Long, Jin Xin, Hong Jun, Ran Songlin, Zhou Fei

Archives of Foundry Engineering

2023

Vol. 23, iss. 3

51--58

A wide variety of water-soluble cores are widely used in hollow composite castings with internal cavities, curved channels, and undercuts. Among them, the cores made by adding binders of inorganic salts in the form of aqueous solutions have excellent solubility in water. However, excellent collapsibility is often accompanied by poor moisture absorption resistance. In this study, a water-soluble core with moderate strength and moisture absorption resistance was prepared by hot pressing and sintering the core sand mixture of sand, bentonite, and composite salts, and a tee tube specimen was cast. The experimental results showed that the cores with KCl-K2CO3 as binder could obtain strength of more than 0.9 MPa and still maintain 0.3 MPa at 80±5% relative humidity for 6 hours; the subsequent sintering process can significantly improve the resistance to moisture absorption of the hot pressed cores (0.6 MPa after 24 hours of storage at 85±5% relative humidity); the water-soluble core prepared by the post-treatment can be used to cast tee pipe castings with a smooth inner surface and no porosity defects, and it is easy to remove the core.

Advances in Technology of Soluble Cores for Die Castings

Jelínek P., Adámková E., Mikšovský F., Beňo J.

Archives of Foundry Engineering

2015

Vol. 15, iss. 2

29--34

A number of technologies is developed that substitute simple metal cores in the high-pressure casting technology. Soluble cores, namely on the salt basis, represent the highest prospect. The contribution gives the results of the production of salt cores by high-pressure squeezing and shooting with using a binder. Special attention is paid to the shape of NaCl salt crystals with additives and the influence on strength properties of cores. A technology of bonding the salt cores is developing. Salinity of circulating water is studied and it is checked with the aid of electrical conductance.

Lost Cores for High-Pressure Die Casting

Jelinek P., Adámková E.

Archives of Foundry Engineering

2014

Vol. 14, iss. 2

101--104

Development of salt cores prepared by high-pressure squeezing and shooting with inorganic binders has shown a high potential of the given technology even for high-pressure casting of castings. Strength, surface quality of achieved castings, and solubility in water become a decisive criterion. The shape and quality of grain surface particularly of NaCl – cooking salts that can be well applied without anticaking additives has shown to be an important criterion. Thus the salt cores technology can cover increasingly growing demands for casting complexity especially for the automobile industry.