Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 6

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  ruchy pionowe
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
Subsidence and vertical movements in mines are a challenge in mining operations. To qualify as a controlled mine site, ground movements must be measured regularly during mining operations. Boleo Copper District mine was monitored and the movement during mining operations was measured from Oct. 31, 2018 to March 15, 2019. The evaluation of vertical and horizontal movement was determined in four locations in the mine areas M303, M303S, M303 C, and M305. The exploitation area, which measured approximately 80 £ 90 m2 with a height of 2.4 m, impacted the surface in the form of cracks. These cracks were observed on the topographic surveys and varied during the mining operations from the beginning to the end. The final results indicated that the points with the greatest displacement were those in the central zone of the mine excavation (points #3, 5, and 6) and the displacement trend of the ground was toward this zone. In theory, the subsidence is typically lesser than the thickness of the extracted ore. In this case, the maximum subsidence was 1.15 m and the ore seam thickness was 2.4 m. The maximum possible subsidence is typically 55-65% of the extracted seam thickness; however, because chain pillars are generally left in place, and provide some support, this maximum possible subsidence is rarely reached. In this case, the maximum subsidence was 52% of the seam thickness.
EN
The goal of this elaboration was to elaborate the map of vertical crustal movements gradients in the territory of Poland. This paper describes general characteristic of leveling data from last two leveling campaigns as well as the method of evaluation. Earlier gradient map from 1990 is also discussed. The map of gradients with an accuracy estimate is a result of this work.
PL
Celem pracy było opracowanie map gradientów prędkości pionowych ruchów powierzchni skorupy ziemskiej na obszarze Polski. W artykule przedstawiono ogólną charakterystykę materiału niwelacyjnego z ostatnich dwóch kampanii niwelacji precyzyjnej oraz sposób opracowania map gradientów. Odniesiono się także do wcześniej opracowanej mapy gradientów z roku 1990. Efektem jest mapa gradnientów wraz z oceną błędów średnich ich wyznaczenia.
3
Content available remote Wynik zależy od metody
PL
Głównym aspektem prezentowanej pracy jest wyjaśnienie wpływu metody interpolacjina przedstawienie zjawiska, jakim są ruchy pionowe skorupy ziemskiej. W pracy porównano kilka metod interpolacji (krigingu, radialnych funkcji bazowych, triangulacji z liniową interpolacją, naturalnego sąsiedztwa, najmniejszej krzywizny, najbliższego sąsiedztwa, odwrotnych kwadratów odległości, lokalnego wielomianu, zmodyfikowaną Sheparda) oraz zweryfikowano ich przydatność do obliczenia wartości ruchu pionowego skorupy ziemskiej w dowolnym punkcie. Najlepsza okazała się metoda naturalnego sąsiedztwa.
EN
The mine aspect of the paper is the explanation how presentation methods of the Earth's vertical crustal movements are influenced by interpolation methods. Several methods were compared and verified (kriging, radial basis function, triangulation with linear interpolation, natural neighbour, minimum curvature, nearest neighbour, inverse distance to a power, local polynominal, modified Shepard's). Natural neighbour occured to be the best one.
PL
Prace nad badaniem ruchów pionowych skorupy ziemskiej na obszarze Polski wyznaczonych z danych niwelacyjnych trwają od lat pięćdziesiątych ubiegłego wieku. Do tej pory powstały dwie mapy takich ruchów: w 1985 i 2006 roku. Obecnie informacje o ruchach pionowych powierzchni skorupy ziemskiej nabierają dużego znaczenia w świetle budowy kinematycznego układu wysokościowego. W opracowaniu podjęto tematykę pozyskania danych geodezyjnych (niwelacyjnych), które umożliwiłyby rozpoczęcie prac nad kinematycznym wyznaczeniem ruchów pionowych skorupy ziemskiej na obszarze Polski. Badany materiał niwelacyjny to dane z czterech ostatnich kampanii niwelacyjnych przeprowadzonych w latach: 1926–1937, 1953–1955, 1974–1982, 1997–2003. Sprawdzono także możliwość pozyskania informacji o ruchach pionowych z mapy ruchów pionowych z roku 1985.
EN
Research of crustal movements in Poland based on levelling data are performed since 1950/s. Since today two maps depicting this movements were made – in 1985 and 2006. Nowadays, information about vertical crustal movements are gaiging attention in the aspect of kinematic reference system design. In the paper, the author presents the possibilities of compiling the geodetic (levelling) data, what would enable commence works on defining the kinematic vertical movements of the Earth’scrust all over Poland. Data used in the research are taken last four comppppings, performed in 1926–1937, 1953– 1955, 1974–1982, 1997–2003. Furthermore data from the verticalcrustal movements map from 1985 was taken into account.
5
Content available Ruchy pionowe skorupy ziemskiej w Polsce
PL
Obecnie trwają prace nad realizacją drugiego etapu unifikacji sieci niwelacyjnych w Europie, tj. kinematycznym wyrównaniem sieci UELN-95 (rezolucja nr 5 sympozjum EUREF, Praga 1999 r.). Aby wykonać takie wyrównanie, konieczny jest model ruchów pionowych skorupy ziemskiej dla obszaru Europy. Dla obszaru Polski takie ruchy wyznaczał dwukrotnie Tadeusz Wyrzykowski z Instytutu Geodezji i Kartografii w Warszawie. Ostatnie takie wyznaczenie miało miejsce około 20 lat temu. Ukończenie kolejnej, czwartej kampanii niwelacji precyzyjnej oraz zgromadzenie pokaźnego zbioru danych mareograficznych umożliwiło podjęcie próby ponownego wyznaczenia ruchów pionowych skorupy ziemskiej na obszarze Polski i opracowania modelu tych ruchów. W artykule przedstawiono wyznaczenie modelu ruchów pionowych skorupy ziemskiej na obszarze Polski z wykorzystaniem danych z trzeciej i czwartej kampanii niwelacji precyzyjnej w Polsce oraz danych ze stacji mareograficznych we Władysławowie, Ustce, Kołobrzegu i Świnoujściu. Względne ruchy pionowe skorupy ziemskiej odniesiono do reperu węzłowego we Władysławowie. Następnie ruchy te odniesiono do mareografu we Władysławowie. Ruchy pionowe mareografu we Władysławowie wyznaczono względem średniego poziomu Morza Bałtyckiego. Do wyznaczenia ruchów mareografu wykorzystano elementy analizy statystycznej: średnią ruchomą oraz regresję liniową. Model ruchów pionowych skorupy ziemskiej na obszarze Polski opracowano stosując interpolację metodą kolokacji. Model sporządzono w postaci numerycznej oraz mapy ruchów pionowych. Opracowany model powinien dostarczyć, dla geodetów, geofizyków i geologów, cennych informacji o zachowywaniu się skorupy ziemskiej na terenie Polski. Model ten powinien także pomóc w stworzeniu kinematycznej sieci wysokościowej w Polsce.
EN
Work is in progress at present in Europe on the realization of the second stage of unifying the levelling networks in Europe, i.e. the kinematic adjustment of the UELN-95 network (resolution 5 of the EUREF symposium, Prague 1999). To perform such an adjustment, a model is necessary for vertical crustal movements for the area of Europe. For the area of Poland such movements calculated twice Tadeusz Wyrzykowski from the Institute of Geodesy and Cartography in Warsaw (1961, 1986). Ending the fourth levelling campaign and recording databases tide gauge, undertake repeated the test of calculation the vertical movements earth crust an area of Poland and made a model of these movements. The paper uses the data of the third and fourth precision levelling campaigns in Poland and the data from tide gaude stations in Władysławowo, Ustka, Kołobrzeg and Świnoujście. On the basis of those data a model of vertical movements in the area of Poland was developed. During the first stage of the study, the relative vertical crustal movements referenced to the tide gauge in Władysławowo were computed. Next the vertical movements of tide gauge in Władysławowo in respect to the mean sea level of the Baltic Sea were determined. Elements of statistical analysis: moving average and linear regression methods were used for identification of tide gauge motions. Finally, the vertical movements of network bench marks relative to the mean sea level were determined. The model of vertical crustal movements in the area of Poland was developed by applying interpolation method. The model developed in that way should provide surveyors, geophysicists and geologists with precious information on the behavior of earth crust in the area of Poland. The model should also allow development of a kinematical levelling network in Poland.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.