Wyniki wyszukiwania - BazTech

1

On elastic contact problems of micro-periodic slant layered composite pressed by a rigid punch with a parabolic or rectangular shape

Sebastianiuk Piotr, Perkowski Dariusz M., Kulchytsky-Zhyhailo Roman

Bulletin of the Polish Academy of Sciences. Technical Sciences

|

2021

|

Vol. 69, nr 6

art. no. e138091

EN

The paper presents an analysis of the influence of the shape of the rigid body pressed into the micro-periodic composite half-space on the examples of two punch shapes – parabolic and rectangular. The presented material is a layered body that consists of infinitely many thin alternately arranged homogenous layers. Layers of the presented composite are oblique to the boundary surface. Two cases of punch tip shape are examined – parabolic and rectangular. The presented problem has been formulated within the framework of a homogenized model with microlocal parameters and solved using the elastic potentials method and averaged boundary condition. Fourier integral transform method has been used to obtain the solution and the inverse integrals have been calculated numerically. Solutions in terms of contact pressure and maximum pressure characteristics were shown in the form of graphs.

2

Relationship in between compression of the rollers and contact area width and the clamp force

Jurkiewicz A., Pyryev Y.

Challenges of Modern Technology

|

2013

|

Vol. 4, no. 2

31--36

EN

In an offset printing machine the rollers (ink unit) and the cylinders (printing unit) are in contact in a lot of places. The contact surfaces comprise a metal surface and a rubber surface. As appears from findings based on the professional literature and experience of people working in printing houses the issue of contact between ink rollers and printing cylinders in an offset printing machine is of great importance. It has impact on the quality of printouts (generation of printouts errors), consumption of energy, time of making the printing machine ready for operation, wear of the machine’s components and related consumables like ink, dampening solution, paper, ink rollers, plate. During the theoretical studies, the equations were derived to show how the rollers compression depends on the contact area width and clamping force. The equations involve Young’s modulus and Poisson’s ratio of rollers’ materials. The difference between these equations and the so far existing equations has resulted from changing the place of applying the clamping force and involving Poisson’s ratio. The paper includes the comparison of the aforesaid new equations and those known from the literature. Moreover, the relationship in between the contact area width and the compression of metal roller and rubber-covered roller was subject to experimental attempts aimed at verification of the equation presented. In order to measure the rollers compression a clock sensor was used, and for measurement of the contact area width – a device called Roller Nip Control. The results of these measurements are presented in this paper and are compared with the results obtained from the equation derived in the course of theoretical studies using the analytical method.

3

Contact Problem of Disk on Shaft Fixed by Induction Shrink Fit

Ulrych B., Kotlan V, Doležel I.

Przegląd Elektrotechniczny

|

2012

|

R. 88, nr 12b

32-34

EN

The problem of shrink fit between the disk and shaft is solved. The shrink fit realized by induction heating must transfer the prescribed torque and power. Both disk and shaft are considered elastic. The first step of the task is to find appropriate dimensions of the disk and interference. The second step is to suggest the parameters of its induction heating. The methodology is illustrated by a typical example.

PL

W artykule rozwiązano problem pasowania kurczowego między tarczą a wałem. Pasowanie kurczowe zrealizowane zostało metodą indukcyjną – musi ono przenieść założone moment i moc. Zarówno tarcza jak i wał zostały potraktowane jako elastyczne. Pierwszym krokiem w rozwiązaniu zadania jest znalezienie dogodnych rozmiarów tarczy. Drugim krokiem jest zasugerowanie parametrów jej nagrzewania indukcyjnego. Ta metodyka została zilustrowana typowym przykładem. (Problem kontaktu tarczy na wale poprzez zastosowania pasowania kurczowego)