Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 5

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  pręt BFRP
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
The seismic performances of 28 geometrically similar concrete shear walls reinforced with basalt fiber-reinforced polymer (BFRP) bars were simulated using a mesoscale modeling approach. In the modeling, concrete heterogeneities were explicitly described, and the interaction between BFRP bars and surrounding concretes was also considered. The influences of shear depth, shear span ratio and vertical reinforcement ratio on the failure of shear walls were investigated. The simulation results indicated that with the increase of shear depth, the failure modes were basically the similar, while the nominal shear strength decreased significantly, namely, the presence of size effect was demonstrated. The shear wall would exhibit different failure modes as the shear span ratio varies. Moreover, it was found that the vertical BFRP bar presented an ignorable influence on the failure mode, while the increase of vertical reinforcement ratio would obviously improve the shear strength of BFRP-RC shear wall. Finally, the present simulated shear strengths were compared with some available size effect laws and some codes.
PL
W pracy analizowano zachowanie się modelowych belek z betonu, zbrojonych prętami bazaltowymi (BFRP), w warunkach trójpunktowego zginania. Badano parametry wytrzymałościowe prętów BFRP. Określono nośność belek na zginanie, odkształcenia betonu i ugięcie. Otrzymane wyniki porównano z wynikami obliczeń ugięcia na podstawie standardu ACI 440:1R-06. Zarysowanie belek pod wpływem obciążenia analizowano przy wykorzystaniu optycznego systemu pomiarowego Aramis 5M. Ze względu na charakterystykę wytrzymałościową prętów kompozytowych, belki zbrojone nimi wykazywały znaczące odkształcenia wywołane rozciąganiem, co skutkowało rozwojem rys o znacznej szerokości. Obserwowano liniową zależność ugięcia belki modelowej od obciążenia. Stwierdzono, że procedura obliczeniowa ACI 440:1R-06 pozwala na dokładne określenie ugięć belek zbrojonych prętami bazaltowymi przy obciążeniach krótkotrwałych.
EN
The behaviour of model beams made of concrete with basalt reinforcing bars (BFRP) in three-point bending test was analysed. The strength parameters of BFRP bars were tested. The bending capacity, deformation of concrete and beam deflection were determined. The obtained results were compared with the results of the deflection calculation based on the ACI 440: 1R-06 standard. Crack propagation in the model beams under load was analysed using the Aramis 5M optical measuring system. Due to the strength characteristics of the composite reinforcing bars, the beams exhibited significant tensile strains, which resulted in the development of cracks of considerable width. A linear dependence of the model beam deflection versus load was observed. It has been found that the ACI 440: 1R-06 calculation procedure allows to determine deflections of beams reinforced with BFRP bars under short-term load.
PL
Przedstawiono wyniki doświadczeń dotyczących efektu skali podczas trzypunktowego zginania belek geometrycznie podobnych. Wyniki porównano z wynikami normowymi. Podkreślono wady i zalety zbrojenia bazaltowego.
EN
The results from experimental investigation of size effect in geometrically similar concrete beams reinforced with BFRP (Basalts Fiber Reinforced Polymer) bars subjected to 3-point bending are presented. Experimental results are compared with theoretical results evaluated based on design codes. Advantages and disadvantages of BFRP bars are emphasized.
PL
W pracy przedstawiono analizę porównawczą doświadczalnych i obliczonych teoretycznie szerokości rys w jednoprzęsłowych belkach swobodnie podpartych zbrojonych prętami bazaltowymi BFRP (Basalt Fibre Reinforced Polymers). Belki typu BFRP wykonano z betonu C30/37 ze zbrojeniem dolnym na zginanie prętami bazaltowymi o średnicy 8 mm, dodatkowo wykonano belki referencyjne ze zbrojeniem stalowym tej samej średnicy. Badano ugięcia i zarysowania oraz nośność belek zbrojonych prętami BFRP, o cechach wytrzymałościowych określonych w testach na rozciąganie. Wykazano, że znacznie zredukowana sztywność elementów zbrojonych prętami bazaltowymi BFRP wywołuje kilkakrotnie większe szerokości rys w porównaniu z belkami zbrojonymi prętami stalowymi o tym samym przekroju poprzecznym.
EN
This paper presents a comparative analysis of experimental and theoretical crack widths of simply supported beams reinforced with BFRP rebar (Basalt Fiber Reinforced Polymers). The tested BFRC model beams have been made of concrete class C30/37 and of bottom flexural basalt bars 8 mm in diameter. The reference RC beams with traditional flexural steel reinforcement have been additionally made of the same diameter. Beam deflections, concrete crack widths and strength capacity of beams reinforced with BFRP bars as well as with traditional steel bars have been registered. It has been shown that crack widths of beams reinforced with BFRP bars have been much (three to four times) higher than in the beams reinforced traditionally
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.