Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 25

Liczba wyników na stronie
first rewind previous Strona / 2 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  power definition
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 2 next fast forward last
EN
There are published opinions that the complex number algebra as used for circuits analysis, power theory of electrical circuits and methods of reactive compensators design should be superseded by geometric algebra. Such opinions were presented in the paper ”The IEEE Standard 1459, the CPC-based Power Theory, and Geometric Algebra in Circuits with Nonsinusoidal Sources and Linear Loads”, and “Advantages of Geometric Algebra Over Complex Numbers in the Analysis of Linear Networks with Nonsinusoidal Sources and Linear Loads”, published in IEEE Transactions on Circuits and Systems-I, in 2012. These opinions were supported in these papers by results obtained using the geometric algebra for describing power properties of electrical circuits and reactive compensator design. This paper presents critical comments to these papers. It shows that their authors were able to apply the geometric algebra to only single-phase circuits with linear loads but the current decomposition they obtained was known 40 years earlier. The same applies to reactive compensators design, thus the results obtained in the commented papers are dramatically obsolete with regard to the current state the power theory development and state of the knowledge on compensation. The suggestion that the algebra of complex numbers, successfully used now for linear circuits analysis, should be superseded by the geometric algebra was not supported by any credible argument. It was not shown that geometric algebra is superior over the circuit analysis based on the algebra of the complex numbers. Quite opposite, it makes this analysis dramatically much more complex, without any benefits for this complexity. It does not contribute to our comprehension of power-related phenomena in electrical circuits.
PL
Istnieją opublikowane opinie sugerujące, że algebra liczb zespolonych, tak jak jest ona używana w analizie obwodów, teorii mocy i syntezie kompensatorów reaktancyjnych, powinna być zastąpiona algebrą geometryczną. Takie opinie zostały przedstawione w artykułach “The IEEE Standard 1459, the CPC-based Power Theory, and Geometric Algebra in Circuits with Nonsinusoidal Sources and Linear Loads”, oraz “Advantages of Geometric Algebra Over Complex Numbers in the Analysis of Linear Networks with Nonsinusoidal Sources and Linear Loads”, opublikowanych w IEEE Transactions on Circuits and Systems-I, w 2012 roku. Opinie te zostały poparte wynikami ilustującymi zastosowanie algebry geometrycznej w teorii mocy oraz w metodach syntezy kompensatorów reaktancyjnych. Niniejszy artykuł przedstawia krytyczną ocenę tych artykułów. Pokazuje, że ich autorzy byli w stanie zastosować algebrę geometryczną wyłącznie do obwodów jedno-fazowych z odbiornikami liniowymi, jednak otrzymali jedynie ortogonalny rozkład prądu odbionika, znany już od lat 40-tu. To samo dotyczy syntezy kompensatorów reaktancyjnych. Wyniki te są dramatycznie opóźnione w stosunku do obecnego stanu teorii mocy i wiedzy o syntezie kompensatorów. Opinia o tym, że algebra liczb zespolonych, która jest obecnie skutecznym i całkowicie wystarczającym narzędziem analizy obwodów liniowych, powinna być zastąpina algebrą geometryczną, nie została poparta żadnym przekonywującym argumentem. Przeciwnie, komplikuje ona dramatycznie tę analizę, bez jakichkolwiek korzyści. Nie przyczynia się też do pogłębienia interpretacji zjawisk fizycznych w obwodach elektrycznych.
EN
The CPC-based power theory (PT) of electrical circuits and systems provides an interpretation of the energy transfer-related physical phenomena in such systems and fundamentals for their compensation. It has been developed, step-by-step, with partial results published in Polish, German, English and American journals and in conference proceedings, often not reported on the main databases and consequently, difficult to be found. Its development was a reaction for the lack of progress in long-lasting attempts aimed at explanation of the energy transfer-related physical phenomena and the lack of fundamentals for compensation in electrical systems with nonsinusoidal voltages. This Review provides a draft of the whole CPC concept with references to more detailed results and a concise historical background and critical comments on other power theories.
PL
Teoria mocy obwodów i systemów elektrycznych, oparta na koncepcji Składowych Fizycznych Prądów, tworzy podstawę teoretyczną dla interpretacji zjawisk fizycznych towarzyszących przesyłowi energii w takich układach i ich kompensacji. Była ona rozwijana stopniowo, z cząstkowymi wynikami publikowanymi w czasopismach polskich, niemieckich, angielskich i amerykańskich oraz w materiałach konferencyjnych, często trudnych do odnalezienia. Rozwój CPC był odpowiedzią na brak postępu w badanich nad teorią mocy i na brak podstaw kompensacji w układach z napięciami niesinusoidalnymi. Przegląd ten jest skrótem CPC, z odnośnikami do bardziej szczegółowych wyników oraz z tłem historycznym i krytycznymi uwagami dotyczącymi wyników innych teorii mocy.
EN
The paper provides the Currents’ Physical Components (CPC)-based fundamentals for reactive balancing of unbalanced loads supplied by a nonsinusoidal voltage in four-wire systems, meaning with a neutral conductor. The whole compensation of the unbalanced and reactive currents in such conditions requires reactive compensators of high complexity, i.e., built of a high number of reactive devices. This complexity can be reduced on the condition that the objective of a whole compensation is abandoned for a goal of only minimization of the supply current three-phase rms value. The paper presents a method of minimization of this three-phase rms value of the supply current by a compensator composed of branches, that have no more than two reactive devices, meaning an inductor and a capacitor.
PL
Artykuł przedstawia podstawy, oparte na teorii Składowych Fizycznych Prądów (Ang. CPC), reaktancyjnego równoważenia odbiorników niezrównoważonych, zasilanych napięciem niesinusoidalnym w układach czteroprzewodowych, to jest z przewodnikiem zerowym. Całkowita kompensacja prądu niezrównoważenia i prądu biernego wymaga w takich warunkach kompensatorów o wysokiej złożoności, to jest o dużej liczbie elementów reaktancyjnych. Złożoność tę można obniżyć przez rezygnację z całkowitej kompensacji na rzecz jedynie minimalizacji trójfazowej wartości skutecznej prądu zasilania. Artykuł przedstawia metodę takiej minimalizacji z pomocą kompensatora zbudowanego z gałęzi mających nie więcej niż dwa elementy reaktancyjne, to jest cewkę indukcyjną i kondensator.
EN
Power properties of unbalanced linear time-invariant (LTI) loads in three-phase three-wire circuits at asymmetrical and nonsinusoidal supply voltages are investigated in this paper. It is demonstrated that the supply current of such loads can be decomposed into Currents’ Physical Components (CPC), associated with distinctive physical phenomena in the load. The power equation is developed and it is also demonstrated how the current components can be expressed in terms of the supply voltage and the equivalent parameters of the load.
PL
W artykule analizowane są właściwości energetyczne niezrównoważonych, czasowo-niezmienniczych (LTI) odbiorników trójfazowych, zasilanych napięciem niesymetrycznym i niesinusoidalnym w systemach trójprzewodowych. Pokazano, że prądy zasilania w takich warunkach mogą być rozłożone na składowe stowarzyszone z konkretnymi zjawiskami fizycznymi w odbiorniku, to jest na Składowe Fizyczne. Pokazano jak Składowe Fizyczne Prądów mogą być obliczane na podstawie znajomości napięć zasilania i równoważnych parametrów odbiornika.
5
Content available remote Critical comments on the Conservative Power Theory (CPT)
EN
Main features of the Conservative Power Theory (CPT) are examined in the paper. It was concluded that the “reactive energy” as defined in CPT cannot be regarded as a physical quantity. It was demonstrated that separation of the void reactive current can lead to wrong conclusions at a reactive compensator design. It was shown that distortion power defined in the CPT has no relation to mutual distortion of the load voltage and current. The meaning of the term “conservative” as used in the CPT, is discussed as well. It is emphasized that the conservative property of the “reactive energy” is only mathematical, but not physical property of that “energy”.
PL
W artykule przeanalizowano główne właściwości Zachowawczej Teorii Mocy (ang. Conservative Power Theory - CPT). Pokazano, że zdefiniowana w CPT „energia reaktancyjna” nie może być uważana za wielkość fizyczną. Pokazano, że wyodrębnienie z prądu odbiornika „prądu bezużytecznego” (ang.: „void current”) może prowadzić do błędnych wniosków odnośnie kompensacji reaktancyjnej, a ponadto, że zdefiniowana w CPT moc odkształcenia nie ma związku ze wzajemnym odkształceniem prądu i napięcia odbiornika. W artykule analizowane jest także znaczenie pojęcia „zachowawcza”, użytego w nazwie CPT. Pokazano, że „energia reaktancyjna” ma właściwość zachowawczą tylko w sensie matematycznym, lecz nie w sensie fizycznym.
PL
W artykule przedstawiono dwie definicje mocy opracowane w pierwszej połowie XX wieku, które do dziś są wykorzystywane w teorii mocy. Następnie omówiono błędy tych metod. Analizę oparto na przykładach, sprawdzających założenia teoretyczne tych metod. Współczesne definicje mocy bazują na teoriach Budeanu i Fryzego, dlatego ważne jest przypominanie środowisku naukowemu o ograniczeniach i niejednoznacznościach w nich ukrytych. Tematyka artykułu jest również aktualna z powodu rozwoju napędu elektrycznego w środkach transportu publicznego.
EN
The article presents two definitions of power, which were developed in the first half of the twentieth century and are used in the theory of power to this day. Then, errors in these methods are discussed. The analysis is based on examples that checked theoretical assumptions of these methods. Contemporary definitions of power are based on Budeanu and Fryze theories, so it is important to remind the scientific community about the limitations and errors in them hidden. The subject of this article is also valid because of the development of electric drive on public transport.
EN
Energy flow related phenomena in three-phase unbalanced, linear, time-invariant (LTI) loads, supplied with asymmetrical, but sinusoidal voltage, in three-wire systems, are investigated in the paper. It is demonstrated that the load current can be decomposed into Currents’ Physical Components (CPC), associated with distinctive physical phenomena in the load. It is also shown how the CPC can be expressed in terms of the supply voltage and equivalent parameters of the load. An equivalent circuit of LTI loads at asymmetrical, but sinusoidal supply voltage is presented as well. This decomposition provides solid fundamentals for defining powers of such loads.
PL
Artykuł przedstawia wyniki badań nad zjawiskami energetycznymi w liniowych, czasowo-niezmienniczych (LTI) odbiornikach niezrównoważonych, zasilanych niesymetrycznym, lecz sinusoidalnym napięciem w obwodach trójprzewodowych. Pokazano, że prąd takich odbiorników może być rozłożony na Składowe Fizyczne, jednoznacznie stowarzyszone z określonymi zjawiskami fizycznymi. Pokazano także, że prądy te mogą być określone poprzez napięcie zasilania i parametry równoważne odbiornika. Przedstawiono także obwód równoważny niezrównoważonych odbiorników LTI, zasilanych niesymmetrycznym, lecz sinusoidalnym napięciem. Rozkład ten tworzy solidne podstawy dla definicji mocy takich odbiorników.
EN
There are situations in electrical distribution systems where voltages and currents cannot be regarded as periodic quantities. They could be non-periodic. Nonetheless, properties of electrical systems confine this non-periodicity of voltages and currents to a particular sub-set of nonperiodic quantities, referred to as semi-periodic quantities in this paper. The paper presents the concept of semi-periodic quantities and defines major functionals, such as the running active power, the running rms value, the scalar product and the running complex rms (crms) value of quasiharmonics, needed for describing electrical systems with such voltages and currents in power terms. A recursive approach to calculation of these functionals was presented as well. The paper presents fundamentals of the Currents’ Physical Components (CPC) – based power theory of systems with semi-periodic voltages and currents. An application of the semi-periodic concept to a load current decomposition in single-phase circuits with linear loads and with harmonics generating loads is presented as well. The paper presents also a concept of extrapolation of CPC into the closest future, which enables quasi-instantaneous generation of control signals for switching compensators.
PL
Są takie sytuacje w systemach rozdzielczych, w których napięcia i prądy nie mogą być traktowane jako przebiegi okresowe. Mogą one być nieokresowe. Właściwości systemów rozdzielczych ograniczają jednak nieokresowość tych przebiegów do pewnego szczególnego podzbioru przebiegów nieokresowych, określago w tym artykule podzbiorem przebiegów półokresowych (semi-periodic). Artykuł definiuje podstawowe funkcjonały, takie jak biegnąca moc czynna, biegnąca wartość skuteczna, biegnący iloczyn skalarny oraz zespolona wartość skuteczna (crms) quasi-harmonicznych, potrzebnych do opisu właściwości energetycznych w obwodach. Przedstawiona jest także metoda rekursywnego obliczania tych funkcjonałów. Artykuł przedstawia podstawy rozkładu prądu na składowe fizyczne w obwodach z odbiornikami liniowymi oraz z odbiornikami generującymi harmoniczne oraz z półokresowymi przebiegami prądu i napięcia. Przedstawiona jest też metoda ekstrapolacji składowych fizycznych w najbliższą przyszłość, umożliwiająca niemal momentalną generację sygnałów kontrolnych kompensatora.
EN
Energy flow related phenomena in three-phase systems with neutral conductor and unbalanced, linear, time-invariant (LTI) loads, supplied with nonsinusoidal, but symmetrical voltage are investigated in the paper. It is demonstrated that the load current can be decomposed into Currents’ Physical Components (CPC), associated with distinctive physical phenomena in the load. It is also shown how the CPC can be expressed in terms of the supply voltage and equivalent parameters of the load. This decomposition provides solid fundamentals for defining powers of such loads.
PL
Artykuł przedstawia wyniki badań nad zjawiskami energetycznymi w liniowych, czasowo-niezmienniczych (LTI) odbiornikach niezrównoważonych, zasilanych niesinusoidalnym lecz symetrycznym napięciem w układach trójfazowych z przewodnikiem neutralnym. Pokazano, że prąd zasilania takich odbiorników może być rozłożony na Składowe Fizyczne, jednoznacznie stowarzyszone z określonymi zjawiskami fizycznymi. Pokazano także, że prądy te mogą być określone poprzez napięcie zasilania i parametry równoważne odbiornika. Rozkład ten tworzy solidne podstawy dla definicji mocy takich odbiorników.
PL
Odbiorniki trójfazowe są niekiedy zasilane napięciem niesymetrycznym, jednak obecny stan rozwoju elektrotechniki nie pozwala opisywać takich odbiorników równaniem mocy, to jest relacją wiążącą wszystkie moce odbiornika. Można to obecnie robić tylko w sposób przybliżony, przyjmując, że napięcie zasilania jest symetryczne. Uniemożliwia to także projektowanie kompensatorów reaktancyjnych, redukujących moc bierną i moc niezrównoważenia w warunkach zasilania napięciem niesymetrycznym. Przedmiotem niniejszego artykułu jest eliminacja tego ograniczenia elektrotechniki poprzez wyprowadzenie równania mocy odbiorników trójfazowych zasilanych napięciem niesymetrycznym oraz przedstawienie podstaw konstrukcji kompensatorów reaktancyjnych odbiorników pracujących w takich właśnie warunkach.
EN
Three-phase loads are sometimes supplied with asymmetrical voltage, however, the present state of electrical engineering does not allow for describing them with a power equation, meaning with a relationship between all powers. It can be done only at the assumption that the supply voltage is symmetrical. It makes impossible of designing reactive compensators for the reactive power and the unbalanced power compensation for the load balancing. The development of the power equation of loads with asymmetrical supply voltage and fundamentals of reactive compensation of such loads is the subject of this paper.
EN
Most of residential and industrial distribution systems as well as traction and distribution systems in commercial buildings are three-phase systems with a neutral conductor, denoted in this paper as 3pN systems. When loads are unbalanced then such systems cannot be now described as a whole in power terms because of a controversy regarding definition of the apparent, even if voltages and currents are sinusoidal. Consequently, it is not clear now how the apparent power and the power factor are affected by the load imbalance. The paper suggests definition of the apparent power for such systems and the power equation. It is based on the supply current decomposition into the Currents’ Physical Components (CPC). The paper introduces two new powers that specify the effect of the load imbalance upon the apparent power of three-phase systems with a neutral conductor at sinusoidal voltages and currents.
PL
Sieci rozdzielcze w dzielnicach mieszkaniowych, zakładach przemysłowych, budynkach handlowych czy publicznych, a także sieci trakcyjne, są budowane zwykle jako sieci trójfazowe z przewodem zerowym. Oznaczane są one w tym artykule jako sieci 3pN. Wtedy, gdy odbiorniki zasilane z sieci 3pN nie są zrównoważone, nie można obecnie napisać równania mocy takich obwodów, trakto-wanych jako całość, a jedynie równania mocy poszczególnych faz. Przyczyną tego jest kontrowersja wokół definicji mocy pozornej w takich obwodach. Przedmiotem niniejszego artykułu jest propozycja definicji mocy pozornej, oraz równanie mocy w obwodach trójfazowych z przewodem zerowym i sinusoidalnymi przebiegami prądu i napięcia. Równanie to wynika z rozkładu prądu zasilania w takich obwodach na Składowe Fizyczne (ang.: CPC).
EN
Historically justified goals of the power theories development, general expectations and mathematical tools used for it are discussed in the paper. General features of the power theory of single-phase circuits with sinusoidal voltages and currents, the only commonly accepted power theory, were used as a reference for the presented discussion. Also discussed in this paper are the major issues of power theories development such as these: Should the power theory be formulated in the frequency or in time-domain? Should it be based on quantities averaged over a period or on instantaneous values? It was shown that in spite of the name “power” theory, the load currents rather than powers convey information on power properties of electrical circuits.
PL
Przedmiotem niniejszego artykułu są historycznie uzasadnione cele rowoju teorii mocy, oczekiwania wzgledem niej oraz służące temu rozwojowi matematyczne narzędzia teorii mocy. Odniesieniem dla tej dyskusji są ogólne właściwości teorii mocy obwodów jednofazowych z sinusoidalnymi przebiegami prądu i napięcia, jedynej teorii mocy, co do której nie ma w elektrotechnice zastrzeżeń. W artykule omawia się częstotliwościowe i czasowe podejscia do teorii mocy a także formułowanie tej teorii w oparciu o wielkości otrzymane poprzez uśrednianie lub oparte na wielkościach chwilowych .
EN
The paper evaluates the possibility of formulating the Currents’ Physical Component (CPC) – based power theory in the time-domain. It was concluded that the currents’ physical components, defined originally in the frequency-domain, can be calculated in the time-domain, but there is still the lack of their physical interpretation in that domain.
PL
Autor niniejszego artykułu był studentem Profesora Fryzego a jednocześnie jest kontynuatorem jego prac nad rozwojem teorii mocy obwodów z niesinusoidalnymi przebiegami prądu i napięcia. Artykuł ten łączy osobiste wspomnienia autora z kontaktów z Profesorem Fryzem z oceną Jego miejsca w rozwoju teorii mocy. Wskazuje te idee Prof. Fryzego, które na trwałe pozostały w tej teorii oraz te, które nie mogły w niej pozostać. W zakończeniu Autor tego artykułu wyraża pogląd, że Profesor Fryze był tym naukowcem pracującym jak wielu nad teorią mocy, który odcisnął najmocniejsze piętno na jej rozwoju.
EN
The author of this paper was Professor Fryze's student and, at the same time, he is a continuator of his research on powers in systems with nonsinusoidal voltages and currents. The paper combines personal impressions on contacts with Prof. Fryze as a teacher with reflections on Fryze's place in the research on the power theory development. The paper indicates ideas that have become permanent in the power theory and those, which had to be abandoned. In conclusions the author expresses his opinion, that just Prof. Fryze set the most visible imprint on the power theory development.
15
Content available remote Power theories and meta-theory of powers in electrical circuits
EN
Some ideas and rules used in the past for the development of the currently existing power theories of electrical circuits are compiled in the paper. Such rules can be regarded as a meta-theory of electric power, meaning a theory that has other theories as its subject matter, in this case, power theories. Distinction of power theories from a meta-theory of electric power provides a clarification in debates on electric powers. Moreover, motivations, validation and comparison of power theories cannot be a subject of these theories, but a meta-theory of electric power. Also history of various approaches to power theories development, such as averaging and instantaneous approaches, time-domain and frequency-domain approaches, are compiled and discussed in the paper.
PL
W artykule zestawiono użyte w przeszłości idee i zasady odnośnie formułowania istniejących obecnie teorii mocy obwodów elektrycznych. Idee takie i zasady mogą być traktowane jako meta-teoria mocy obwodów elektrycznych, w tym sensie, że jej przedmiotem są inne teorie, w tym przypadku, teorie mocy. Rozróżnienie pojęć teoria i meta-teoria, w odniesieniu do mocy, umożliwia uporządkowanie dyskusji nad mocami w obwodach elektrycznych. Ponadto, motywacje rozwoju teorii mocy, ocena ich wiarogodności oraz ich porównywanie nie mogą być przedmiotem teorii, lecz meta-terorii, w tym przypadku, meta-teorii mocy obwodów elektrycznych. W artykule zestawiono także historię różnych podejść do rozwoju teorii mocy, takich jak opartych na uśrednianiu i podejściu chwilowym, w dziedzinie czestotliwości i w dziedzinie czasu.
16
Content available remote Stochastic power process for nonlinear inertialess elements
EN
In many cases current and voltage waveforms in systems are expressed by stochastic processes. Instantaneous power definition for a nonlinear inertialess elements with stochastic waveforms has been given in the paper. Moments of the power process have been defined as deterministic functions of the moments of stochastic Gaussian current process. This paper is a continuation of previous works and aims at simplified analysis of features of stochastic power processes. Theoretical considerations have been supplemented by examples.
PL
Przebiegi prądów i napięć w wielu układach elektrycznych mogą być opisywane poprzez procesy stochastyczne. W artykule przedstawiono definicję mocy chwilowej jako procesu stochastycznego dla bezinercyjnego element nieliniowego, dla którego zadany jest przebieg prądu. Momenty procesu stochastycznego mocy chwilowej zostały wyrażone jako deterministyczne funkcje momentów Gaussowskiego procesu prądowego. Rozważania teoretyczne zilustrowano przykładami. (Moc jako proces stochastyczny w nieliniowych układach bezinercyjnych.
EN
The generalized theory of instantaneous powers has gained a great popularity in compensation of instantaneous powers and harmonic cancellation. This is practically true for three-phase systems as long as the load-terminal voltages remain balanced and sinusoidal. Nevertheless, for a three-phase four-wire system, when the power system is unbalanced or distorted, then these definitions introduce unsatisfactory cancellation of the source zero sequence current and harmonics suppression. This paper analyzes and simulates the aforesaid problem to show the issues concerned with the generalized theory of instantaneous powers. Further, complementary analytical discussions are suggested to remedy the raised problem. Finally, the improved definitions are simulated for a distorted and unbalanced three phase four-wire system. Comparing the complementary solutions with those of previously emerged generalized definitions confirms that the proposed solutions potentially provide a full cancellation of source-end zero sequence current as well as harmonics suppression under distorted and unbalanced load voltages.
PL
Ogólna teoria mocy chwilowej ma duże znaczenie przy kompensacji mocy chwilowych i eliminacji harmonicznych. Ta teoria jest prawdziwa dla systemów trzyfazowych jeśli napięcie obciążenia pozostaje zrównoważone i sinusoidalne. Jednak w systemach trzyfazowych, czteroprzewodowych te metody nie dają zadawalającej eliminacji prądu zerowego. W artykule przeanalizowano i zasymulowano powyższy problem dla pokazania niedostatków stosowania ogólnej teorii mocy chwilowej. Następnie zaproponowano rozwiązanie tych problemów. Wreszcie przedstawiono ulepszona definicję uwzględniającą system czteroprzewodowy. Wykazano, ze proponowany model umożliwia pełna kompensację prądu zerowego i zmniejszenie zawartości harmonicznych także dla obciążenia układu niezrównoważonego.
18
Content available remote Fryze - Buchholz - Depenbrock: a time-domain power theory
EN
Several power theories trying to explain the difference between the physically defined active power and the apparent power are known – and under discussion. This paper gives an overview of a universal time-domain power theory mainly developed by Fryze, Buchholz and Depenbrock. It is verified by theoretical considerations and explained by examples. The theory allows the assessment of loads concerning effectivity of energy transfer and the application-specific splitting of currents into desirable and undesirable components – which in turn can, e.g., be compensated.
PL
Szereg teorii mocy stara się wyjaśnić różnice między fizycznie zdefiniowaną mocą czynną a mocą pozorną i zagadnienie to jest ciągle dyskutowane. Niniejszy artykuł przedstawia uniwersalną teorię mocy w dziedzinie czasowej rozwinięta głównie w pracach Fryzego, Buchholz’a i Depenbrock’a. Potwierdzona jest ona teoretycznie i wyjaśniona na przykładach. Teoria ta umożliwia ocenę obciążeń odnośnie skuteczności przesyłu energii oraz zastosowań odnośnie rozkładu prądów na składowe użyteczne i nieużyteczne, które mogą być następnie kompensowane.
19
Content available remote Currents’ Physical Components (CPC) concept: a fundamental of Power Theory
PL
Artykuł jest wprowadzeniem do najbardziej obecnie zaawansowanej teorii mocy systemów elektrycznych z niesinusoidal-nymi przebiegami prądu i napięcia, wraz z podstawami ich kompensacji, opartej na koncepcji Składowych Fizycznych Prądu (Currents’ Physical Components – CPC). Obejmuje on układy jednofazowe oraz niezrównoważone układy trójfazowe, zasilane trójprzewodowo, z liniowymi odbiornikami stacjonarnymi (LTI) oraz z odbiornikami generującymi harmoniczne prądu (HGL).
EN
The paper introduces Readers to currently the most advanced power theory of electric systems with nonsinusoidal voltages and currents, along with fundamentals of their compensation, based on the concept of Currents’ Physical Components (CPC). It includes single-phase systems and unbalanced three-phase systems with linear, time-invariant (LTI) and harmonic generating loads (HGLs).
20
Content available The Case of Hidden Instantaneous Powers
EN
This brief communication addresses the case of a dc nonlinear load supplied with a perfectly constant instantaneous power. A careful analysis shows that this condition does not provide optimum transfer of electric energy .
first rewind previous Strona / 2 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.