Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 13

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  potassium chloride
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
EN
This study was focused on forward osmosis batch and forward osmosis flowing processes to remove heavy metal (Co+2 ions) from wastewater. Cellulose triacetate (CTA) membrane was used as flat sheet for forward osmosis process. Potassium chloride KCl with different concentrations was used as draw solutions. The experimental work was divided into two parts. Forward osmosis flowing process as first part, was discussed under different operating parameters studied, such as the concentration of draw solutions 10–20 g/l, concentration of feed solutions 15–150 mg/l, temperature of feed and draw solutions 20–50 ºC, pH of feed solution from 2 to 10, feed and draw flow rate were maintained at 50 l/h, and pressure was maintained at 0.25 bar gauge. Forward osmosis batch process as second part, was discussed under different operating parameters, such as the concentration of draw solutions 10–120 g/l, concentration of feed solutions 15–150 mg/l, temperature of feed and draw solutions 20–50 ºC, and pH of feed solution from 2 to 10. The results showed that the water flux increased along with the draw solution concentration, and temperature of feed and draw solutions and decreased with the increasing operating time of experiment, concentration and pH of feed solution. The value of rejection efficiency after 4hrs reached 81.19% for the FO flowing process and 73.19% for the FO batch process.
PL
Azotan amonu wykorzystywany jest w produkcji nawozów oraz materiałów wybuchowych. Jego silnie egzotermiczny rozkład był przyczyną licznych wypadków, które miały miejsce w ostatnim stuleciu. Zdefiniowano wiele substancji chemicznych, które mają wpływ na rozkład azotanu amonu. Chlorki opisywane są jako czynnik przyspieszający, natomiast siarczany jako spowalniający. Z uwagi na występowanie mieszanin azotanu amonu oraz chlorku potasu w formie nawozów wieloskładnikowych niezbędne jest zbadanie stabilizującego wpływu siarczanu potasu, który może być stosowany jako dodatek nawozowy. Celem wykonanych analiz było zbadanie zachodzących w mieszaninach przemian fizykochemicznych z uwzględnieniem niebezpiecznego rozkładu azotanowego dodatku nawozowego. Porównano wyniki otrzymane w trakcie analizy mieszanin azotanu amonu, chlorku potasu oraz siarczanu potasu w różnych proporcjach. Analizy wykonano z wykorzystaniem różnicowej analizy termicznej sprzężonej z termograwimetrią (DTA-TG). Otrzymane wyniki pomogą w stwierdzeniu, czy nawozy wieloskładnikowe na bazie azotanu amonu mogą zawierać chlorki, jeżeli w układzie obecne są dodatkowo substancje stabilizujące egzotermiczny rozkład. Przeprowadzone analizy pozwolą również na wykonywanie dalszych badań w celu znalezienia optymalnych dodatków zapewniających bezpieczeństwo w trakcie stosowania tego typu nawozów.
EN
Ammonium nitrate is used in the production of fertilizers and explosives. Its highly exothermic decomposition has caused numerous incidents that took place during the last century. There are some chemical compounds that can affect the decomposition of ammonium nitrate. Chlorides are described as an accelerating factor and sulphates are known to inhibit the exothermic reaction. Due to the presence of mixtures of ammonium nitrate and potassium chloride in the form of multicomponent fertilizers, it is necessary to examine the stabilizing influence of potassium sulphate, which can be used as a fertilizer additive. The aim of the study was to examine physicochemical changes, taking into account the dangerous decomposition of nitrate fertilizer additive. Results obtained from the thermal analysis of ammonium nitrate, potassium chloride and potassium sulphate mixtures of various rations were compared. Analysis was carried out using differential thermal analysis coupled with thermogravimetry (DTA-TG). Acquired results will help in determining whether ammonium nitrate-based fertilizers can contain chlorides in the presence of decomposition stabilizing substances. Analyses, that were carried out, should enable further research to find the optimal additives that could ensure the safe usage of aforementioned fertilizers.
PL
Azotan amonu jest substancją chemiczną posiadającą wiele zastosowań, między innymi w produkcji nawozów mineralnych oraz materiałów wybuchowych. Jest to substancja, której rozkład stanowi poważne zagrożenie dla otoczenia. Obecność jonów chlorkowych zdefiniowana jest jako czynnik przyspieszający rozkład azotanu amonu. Z uwagi na występowanie mieszanin azotanu amonu z chlorkiem potasu w nawozach wieloskładnikowych konieczne jest zbadanie stabilności termicznej układów zawierających oba związki. Celem wykonanych analiz było zbadanie zachodzących w mieszaninach przemian fizykochemicznych z uwzględnieniem niebezpiecznego rozkładu azotanowego dodatku nawozowego. Porównano wyniki otrzymane w trakcie analizy mieszaniny azotanu amonu oraz chlorku potasu w różnych proporcjach, a także wyniki uzyskane dla tych składników zbadanych osobno. Do przeprowadzenia analizy zachodzących w badanym układzie przemian zastosowano różnicową analizę termiczną sprzężoną z termograwimetrią (DTA-TG). Otrzymane wyniki mogą pomóc w odpowiednim komponowaniu składu nawozów zawierających azotan amonu oraz jony chlorkowe. Pozwolą one także na kontynuacje badań w celu określenia wpływu dodatku innych związków chemicznych na zbadany układ.
EN
Ammonium nitrate is a chemical compound that has many uses, including a production of mineral fertilizers or explosives. Decomposition of this substance poses a serious threat to its surroundings. Presence of chloride ions is defined as an accelerating factor for ammonium nitrate decomposition. Due to the existence of multicomponent fertilizers containing ammonium nitrate and potassium chloride, it is necessary to examine thermal stability of chemical systems comprising both compounds. The main objective of the research was to study phase transitions occurring in analyzed mixtures including dangerous decomposition of nitrate fertilizer component. Results from thermal analysis of ammonium nitrate, potassium chloride and mixtures containing both compounds in various proportions were compared. Analysis was carried out using differential thermal analysis coupled with thermogravimetry (DTA-TG). Acquired results might become helpful in formulation of an appropriate composition of fertilizers containing ammonium nitrate and chloride ions. Further research can be conducted in order to determine the effect of an addition of different chemical compounds to abovementioned systems.
PL
Halogenki metali alkalicznych znane są jako materiały, które wykazują silną luminescencję długożyciową obserwowaną w formie termoluminescencji (TL) lub optycznie stymulowanej luminescencji (OSL). Z tego powodu wykorzystywane są często jako detektory promieniowania jonizującego. Właściwości radioluminescencyjne tych materiałów wciąż nie są dobrze znane. W artykule przedstawiono wyniki badań radiacyjnie indukowanej TL w kryształach chemicznie czystego chlorku potasu. Badania wykonano metodą spektralnie rozdzielczej termoluminescencji (SR-TL) wyznaczając pasma emisji luminescencyjnej tego materiału.
EN
Alkali halides are known as materials exhibiting strong long-lived luminescence observed in the form of thermoluminescence (TL) or optically stimulated luminescence (OSL). For this reason they are often used as detectors of ionizing radiation. Radioluminescent properties of these materials are still not well known. The article presents results of radiation-induced TL in chemically pure crystals of potassium chloride. The study was performed using spectrally resolved thermoluminescence (SR-TL) determining luminescence emission band of this material.
PL
W pracy przeanalizowano wpływ zawartości wilgoci na zmianę cech wytrzymałościowych i charakter pękania polistyrenu (PS) i polimetakrylan metylu) (PMMA). Próbki badano w różnych warunkach środowiskowych (suszono, kondycjonowano w wodnych roztworach chlorku potasu (KCl) i chlorku sodu (NaCl). Odkształcalność polimerów określono na podstawie analizy krzywych wytrzymałościowych odkształcenie-naprężenie uzyskanych w próbie stycznego rozciągania. Ocenę charakteru pękania przeprowadzono na podstawie obserwacji mikroskopowych powierzchni przełomów. Stwierdzono, że wraz ze wzrostem wilgotności w PS i PMMA maleje naprężenie zrywające i wzrasta odkształcalność oraz moduł sprężystości Younga). SEM wskazuje na wyraźne obszary zwierciadlane.
EN
In this work the influence of humidity on the deformation and fracture behavior chosen thermoplastics were investigated. Selected plastic were amorphous polystyrene (PS) and poly(methyl methacrylate) - PMMA. Samples were dried, conditioned in solutions of water with potassium chloride and sodium chloride. Drying process was going for over 70 hours in temperature 50°C, however samples immersed in diluted salts were there for over 72 hours. During analyzing of examines result compared were elongation at break, stress at break, Young modulus. The results showed that stress at break and Young modulus decreases with the increasing of water content and elongation at break increases.
EN
The mixture parameters of themole-fractionmodel of Pitzer-Simonson-Clegg pertaining to the aqueous salt pair NH4Cl + KCl were obtained by fitting the semi-empirical equations to the solid-liquid distribution data measured for KCl and NH4Cl, at 293, 313 and 333 K, as well as to experimental solubilities of NaCl in the quaternary system NaCl + KCl + NH4Cl + H2O. The fitted parameters and the solid-liquid equilibria (SLE) data were used to estimate the activity coefficients of KCl and NH4Cl in the solid phases, thus allowing the calculation of the eutonic points of the discontinuous series of solid solutions precipitated from aqueous solutions containing both chlorides.
EN
The activities of the potassium salt of tartaric acid were obtained by an indirect potentiometric method that requires the presence in the solution of a second salt with a common ion and for which a specific electrode is available. In this study, KCl was used as the second electrolyte. Experimental data were obtained for KHT concentrations varying from 0.005 to 0.015 m, with concentrations in KCl ranging from 0.01 to 0.03 m between 278.15 and 298.15 K. To describe the non-ideal behaviour of the electrolytes in single-salt and in mixed systems, the molal ion-interaction model proposed by Pitzer was used.
8
Content available remote Utilization of waste sodium sulphate to produce potassium sulphate
EN
The process of manufacturing potassium sulphate with an application as a fertilizer was developed. Post-chromium sodium sulphate containing sodium dichromate was utilized as a raw material. The conditions used during conducting individual stages of the process were as follows: i) separation of chromium from the sodium sulphate solution (reduction of Cr(VI) to Cr(III)) - pH 1.5 - 2.0; the mole ratio of sodium sulfite to chromium (VI) - (1.4 - 1.6): 1.0 pH of Cr2O3źnH2O precipitation - 8.5), ii) a two-stage conversion of sodium sulphate with potassium chloride (I stage - molar ratio KCl:Na2S04:NaCl = 1.5:1.0:0.6, total concentration of salts - 35 wt.%; II stage - molar ratio KCl:K3Na(S04)2 = 4:1, total concentration of salts - 30 wt.%) and iii) a two-stage crystallization of salts from the mixture of mother solutions (I stage - evaporation to 60 wt.%, crystallization at 2°C; II stage - evaporation to 60 wt.%, crystallization at 110°C). Raw potassium sulphate (98 wt.% K2S04, 1 wt.% Cl, 6 ppm Cr(III)) for the production of low-chloride fertilizers and raw sodium chloride (by-product) were obtained. The proposed technology allowed closing the mass fluxes. The mixture of K3Na(S04)2 and KCl obtained after the first stage of the mother liquor concentration was recycled to the point of potassium sulphate crystallization. On the other hand, the post-crystallization liquor remained after the second stage of concentration was recycled to the process of glaserite crystallization.
PL
Węglan potasu jest jednym z najważniejszych substancji nieorganicznych wykorzystywanych w przemyśle. Najważniejszym odbiorcą tego produktu jest przemysł szklarski (44% podaży), natomiast pozostałe 56% przypada na inne gałęzie przemysłu m.in. przemysł spożywczy, farmaceutyczny oraz włókienniczy. W pracy przedstawiono możliwość wykorzystania katolitu z elektrolizy przeponowej wodnego roztworu chlorku potasu do produkcji węglanu potasu. Proponowane rozwiązanie pozwala zagospodarować nadmiar tego półproduktu w przemyśle elektrochemicznym. Przytoczono również ilościowy opis krystalizacji masowej wodorowęglanu potasu.
EN
The potassium carbonate is one of the most important inorganic substance used in the industry. The large buyer of this product is the glass industry (44% of supply), however remaining 56% falls onto others branches of industry i.e. food, pharmaceutical and textile industry. The possibility of using of catholyte coming from the diaphragm electrolysis of potassium chloride aqueous solution in production of potassium carbonate has been presented in this paper. The proposed solution allows to utilize of excess of this products in the electrochemical industry. The quantitative description of mass crystallization of potassium bicarbonate was quoted also in this work.
EN
The effect of different concentrations of sodium and potassium chlorides on the mortality, infective ability and the productivity of entomopathogenic Steinernema bicornutum and Heterorhabditis megidis nematodes was tested thoroughly under laboratory conditions. The experiment studied the reaction of nematodes to contact with salt solutions within concentration range from 0.0 to [formula]. The salt concentrations did not significantly influence the biological activity of nematodes. The mortality of infective larvae used to be lower as compared with the control (deionised water). Potassium chloride generally caused an increase in the pathogenesis of parasitic nematodes especially the H. megidis species. The results allow to conclude that an increase in soil salinity in areas, which undergo anthropomorphic pressure, should not limit the biological activity of entomopathogenic nematodes from the Steinernematidae and Heterorhabditidae families.
PL
W warunkach laboratoryjnych testowano wpływ zróżnicowanych stężeń chlorku sodu i chlorku potasu na śmiertelność, zdolności infekcyjne oraz produktywność nicieni owadobójczych. W doświadczeniu przebadano reakcję nicieni Steinernema bicornutum i Heterorhabditis megidis na kontakt z roztworami soli w zakresie od 0,0 do [wzór]. Zastosowane stężenia soli nie wpływały znacząco na aktywność biologiczną nicieni. Nie stwierdzono istotnego podwyższenia śmiertelności larw inwazyjnych nicieni, która była prawie zawsze niższa w porównaniu z kontrolą (woda dejonizowana). Chlorek potasu na ogół powodował zwiększenie patogeniczności pasożytniczych nicieni, zwłaszcza gatunku H. megidis. Uzyskane wyniki badań pozwalają wnioskować, że zwiększone zasolenie gleby na terenach podlegających antropopresji nie powinno ograniczać aktywności biologicznej nicieni owadobójczych z rodziny Steinernematidae i Heterorhabditidae.
EN
The mutual solubility of KCl and V2O5 in water within temperature range of 293 to 323 K was reported. These results were used to plot a part of the polythermal solubility surface for the KCl + V2O5 + H2O system. The data are essential in determination of the optimum operating parameters for the potassium metavanadate production process based on KCl and V2O5 in the presence of steam or oxygen.
12
Content available remote Synthesis of KVO3 from KC1 and V2O5 in presence of oxygen
EN
Investigation was carried out on the optimization conditions of the synthesis of KVO3 and Cl2 from KC1 and V2O5 in the presence of atmospheric oxygen. The research was performed in temperature range 673 - 873 K, for 1 to 7 hours time duration. These data are essential for the evaluation of a new, non - waste production method of potassium carbonate.
EN
Exfoliated graphite (EG) produced on an industrial scale found a new application such as a sorbent for the removal of heavy oils from water. Some investigations of the oil sorption on EG were performed with very satisfactory results. In this paper two methods of EG preparations will be discussed to consider the quality of the obtained product for an oil sorbent application and the influence the way of EG production on the environment.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.