Preferencje help
Widoczny [Schowaj] Abstrakt
Liczba wyników

Znaleziono wyników: 16

Liczba wyników na stronie
first rewind previous Strona / 1 next fast forward last
Wyniki wyszukiwania
Wyszukiwano:
w słowach kluczowych:  petrochemia
help Sortuj według:

help Ogranicz wyniki do:
first rewind previous Strona / 1 next fast forward last
1
Content available remote Agregaty pompowe w projekcie Polimery Police
EN
Do nadzoru stanu technicznego agregatów ważnych i krytycznych w projekcie Polimery Police wdrażany jest odpowiedni system monitorowania. W artykule skupiono uwagę głównie na agregatach pompowych – najczęściej pojawiających się błędach, przyczynach ich wystąpienia i wskazówkach dotyczących wdrażania tego typu systemów w przyszłości, tak aby zapobiec podobnym nieprawidłowościom.
EN
It has been proven that the use of coal-like adsorbents with the mosaic and hydrophobic surface structure is efficient in cleaning the wastewater from a wide range of pollutants under the condition of their uncontrolled release from various small enterprises. is range includes such environmentally dangerous agents as petrochemicals and other pollutants formed at car filling, carwash stations or other similar facilities. Technical pyrocarbon and the coal refinery sludges are readily available waste materials with high porosity, which exhibit some adsorption activity and can be utilized in water/wastewater treatment solutions. en the adsorbents can be either disposed of at the landfill areas or incinerated as components of some secondary fuels. e highest adsorption performance is achieved for the sorbent mixture of the refinery sludges and technical pyrocarbon with the ratio of the components 4:1. If the wastewater is flowing through this composition, the degree of petrochemicals removal reaches 75-80% for the mixture sludge/ technical pyrocarbon, while the pure pyrocarbon ensures the removal degree of 15-20% only. ough adsorption efficiency under stationary conditions (keeping the adsorbent and the wastewater in contact inside some decontamination pond/vessel for at least 24 h) is higher, this option is hard-to-realize for a small car service/wash station. As an alternative, comparatively small wastewater cleaning cartridges filled with the 4:1 mixture of coal sludge and technical pyrocarbon can be recommended for preliminary decontamination of the wastewater formed at such enterprises before their discharge to the local municipal sewerage lines.
PL
Wykazano, że zastosowanie adsorbentów węglopochodnych o mozaikowej, hydrofobowej strukturze powierzchni skutecznie oczyszcza ścieki z szerokiej gamy zanieczyszczeń. Adsorbowane są niebezpieczne dla środowiska substancje takie jak produkty petrochemiczne i inne zanieczyszczenia powstające na stacjach paliw, myjniach samochodowych lub innych podobnych obiektach. Techniczny karbonizat węglowy i szlamy z rafinerii węgla są łatwo dostępnymi materiałami odpadowymi o wysokiej porowatości, które wykazują pewną aktywność adsorpcyjną i mogą być wykorzystywane do oczyszczania wody/ścieków. Następnie adsorbenty mogą być albo składowane na składowiskach odpadów, albo spalane jako składniki niektórych paliw wtórnych. Najwyższą wydajność adsorpcji uzyskuje się dla mieszaniny sorbentów z osadów rafineryjnych i karbonizatu technicznego o stosunku składników 4:1. Jeżeli ścieki przepływają przez tę kompozycję, stopień usunięcia petrochemikaliów osiąga 75-80% dla mieszaniny osad/karbonizat techniczny, podczas gdy czysty karbonizat zapewnia stopień usunięcia tylko 15-20%. Chociaż wydajność adsorpcji w warunkach stacjonarnych (utrzymywanie adsorbentu i ścieków w kontakcie w naczyniu dekontaminacyjnym przez co najmniej 24 godziny) jest wyższa, ta opcja jest trudna do zrealizowania w przypadku małych stacji obsługi/myjni samochodowych. Jako alternatywę można polecić stosunkowo niewielkie wkłady do oczyszczania ścieków wypełnione mieszaniną mułu węglowego 4:1 i technicznego karbonizatu do wstępnego odkażania powstających w tego typu przedsiębiorstwach ścieków przed ich odprowadzeniem do lokalnych miejskich sieci kanalizacyjnych.
3
PL
W stosunku do instalacji przemysłu chemicznego i petrochemicznego, stawiane są obecnie wysokie wymagania dotyczące niezawodności i energochłonności urządzeń w nich zabudowanych. Zdarza się jednak, że już na etapie projektu, a później wykonania, zostają popełnione błędy skutkujące złym funkcjonowaniem całej instalacji i niedotrzymywaniem parametrów technologicznych wymaganychprzez inwestora, a co za tym idzie - dużymi stratami ekonomicznycmi.
PL
Szereg wymagań prawnych związanych z ochroną środowiska wywodzi się z zapisów Dyrektywy IED, która odwołuje się do zintegrowanego zapobiegania zanieczyszczeniom i ich kontroli (IPPC). W niniejszej publikacji na przykładzie kompleksu rafineryjno-petrochemicznego omówiono obowiązujące i przyszłe środowiskowe wymagania prawne w kontekście podejścia zintegrowanego do wszystkich komponentów środowiska. Jednocześnie poddano analizie strumienie wejściowe, międzyoperacyjne i wyjściowe oraz wpływ ich wzajemnych relacji na emisyjność instalacji. Realizacja strategii z zachowaniem najwyższej neutralności ekologicznej wymaga kompleksowej analizy skutków i konsekwencji nie tylko w obrębie danego działania, ale także z uwzględnieniem całego łańcucha produkcyjnego w obrębie zakładu. Rozbudowana sieć wzajemnych powiązań technologicznych oraz zewnętrzne uwarunkowania gospodarcze, ekonomiczne, społeczne i legislacyjne powodują, iż w praktyce niemożliwe są działania w obrębie danego komponentu środowiska bez konsekwencji dla innego lub dla wielkości czy też jakości produkcji.
EN
A number of legal requirements related to environmental protection in Poland originate from the transformation of the IED Directive, which refers to integrated pollution prevention and control (IPPC). In this publication the example of current and future environmental legal requirements in the context of an integrated approach to all environmental components is discussed on the example of a refinery and petrochemical complex. At the same time, input, inter-operational and output streams were analyzed as well as the impact of their mutual relations on the level of emission of the installation. Implementation of the strategy with the highest ecological neutrality requires a comprehensive analysis of impact and consequences not only within the analyzed activity, but also taking into account the entire production chain within the plant. An extensive network of technological correlation with external factors such as market, economic, social and legislative conditions caused that in practice it is impossible to introduce environmental actions for a chosen environment component without an impact on capacity and quality of production.
PL
W pracy, na przykładzie działań prowadzonych w zakładzie produkcyjnym będącym kompleksem rafineryjno-petrochemicznym o projektowej wydajności ok. 17 Mg ropy naftowej rocznie z własnym systemem energetycznym, pokazano możliwe sposoby dostosowania instalacji produkcyjnych do obowiązujących przepisów prawa oraz wytycznych europejskich w zakresie ochrony środowiska. Stosując podejścia zintegrowane, przedsięwzięcia środowiskowe zestawiono wraz z działaniami poprawiającymi efektywność energetyczną w skali całego zakładu. Podjęto próbę znalezienia odpowiedzi na pytanie, jakie konsekwencje towarzyszą ograniczaniu emisji przemysłowych.
EN
Based on selected activities undertaken in the refinery and petrochemical complex with the projected capacity of 17 Mg crude oil annually with own energy system, the present study shows possible ways of bringing production installations into line with binding legal rules and European Union guidelines on environmental protection. Having adopted an integrated approach, we correlated some environmental protection undertakings with energy-related efficiency improvements affecting the whole plant. Our aim was to try to answer the following question – what consequences follow from the limitation of industrial emissions.
EN
The study aimed to determine the baseline and indicators for the emission of greenhouse gases (GHG) and to evaluate the effectiveness of GHG mitigation measures in Thai upstream petrochemical plants. During 2005–2010, the upstream production had an annual demand for energy in the range of 110 000–150 000 TJ, ca. 5–6% of the total Thailand energy consumption. The proportion of energy consumption for producing olefin and aromatic products is 73 and 14%, respectively. The amount of GHG emissions equalled approximately 7–9 Mt CO2 eq. This represents a 3% portion of the total GHG emissions of Thailand, separating into the olefin and aromatic products, around 69 and 18%, respectively. The ratios of GHG emission came from fuel combustion of 59%, steam consumption (28%), electricity consumption (10%) and flare (3%). The carbon intensity of upstream products in the olefins and aromatics’ groups had the range of 1.125–1.309 and 0.518–0.667 t CO2 eq/t, respectively. It was likely that the carbon intensity during the period of 2005–2010 was lowered as the industry sector took measures to improve energy conservation and developed their production processes. The GHG mitigation measures by energy conservation were already implemented including fuel saving (67%), steam saving (23%) and electricity saving (10%).
PL
W pracy na przykładzie kompleksu rafineryjno-petrochemicznego omówiono zintegrowane podejście do zagadnień ochrony środowiska. Przeanalizowano strumienie wejściowe, międzyoperacyjne i wyjściowe oraz wpływ ich wzajemnych powiązań na emisyjność instalacji. Podjęto próbę wykazania, iż zgodnie z zasadą zachowania masy i energii praktycznie niemożliwe są działania w obrębie danego komponentu środowiska bez konsekwencji dla innego lub dla wielkości i jakości produkcji.
EN
This paper presents integrated model approach to refining, petrochemical and energy complex which allows for looking at environmental protection in integrated way. Inputs, outputs and intermediate streams, and the impact of their interactions on emissivity of installations were analysed. An attempt was made to demonstrate that, in accordance with the law of conservation of mass and energy, there is virtually impossible to act within a single component of the environment without consequences for another one or for the quantity and quality of production.
EN
Deoxidation of steel with carbon under reduced pressure is often used for increasing the steel purity. Suitable units for this purpose in foundries are vacuum induction furnaces. Possibilities of increasing the steel purity by deoxidation with carbon in the vacuum induction furnace were studied for the steel for the petrochemistry of specific composition 25Cr/35Ni. The charge composed of the return material only was melted in the air. During melting the charge oxidized and the oxidizing slag formed. Chemical composition of steel, morphology, chemical composition of inclusions in the steel and chemical composition of slag after vacuuming were studied on the basis of samples taken before and after vacuuming. Temperature and oxygen activity were measured before and after vacuuming. Globular inclusions with dominant content of silicon and manganese were observed in steel before and after vacuuming. Contents of total oxygen in steel didn’t change significantly during vacuuming. On the basis of composition of inclusions and measured oxygen activity the activity of Cr2O3 in inclusions was calculated. A slag sample was taken after vacuuming and equilibrium oxygen activity in steel with regard to the Cr2O3 content in the slag was estimated from the slag composition. Equilibrium oxygen activity in relation to the Cr2O3 content in the slag was higher than equilibrium activity measured in the steel. For this reason it is not possible, under the studied conditions, to decrease oxygen content in steel during vacuuming.
9
Content available remote Pół wieku polskiego przemysłu petrochemicznego
EN
The aim of research was to evaluate the effectiveness of proecological investments in the Płock refinery. In 2006 heavy metal content in soils in the vicinity of the plant, and in consumption yields (wheat grain and potato tubers) were investigated and compared with the results obtained in 1987-1988. Current soil phytotoxicity was also studied. The average content (for five sampling points at 1-18 km distances from the refinery) of analyzed metals in soils and plants decreased in 2006 in comparison with 1987-1988, however the phytotoxic effect of soil samples collected at 1-18 km distances in 2006 was noted.
PL
Badano efektywność działań proekologicznych podjętych przez petrochemię w Płocku. W 2006 r. zbadano zawartość metali ciężkich w glebach w sąsiedztwie zakładów i produktach rolnych (ziarno pszenicy i bulwy ziemniaka) i porównano z wynikami otrzymanymi w latach 1987-1988. Gleby badano także pod kątem ich fitotoksyczności. Średnia zawartość analizowanych metali (dla 5 punktów badawczych oddalonych 1-18 km od petrochemii)w glebach i częściach roślin spadła w roku 2006 w porównaniu do lat 1987-1988, jednakże w 2006 r. zanotowano fitotoksyczny efekt gleb zebranych 1-18 km od petrochemii.
PL
Katedra Automatyki AGH jest jedną z największych placówek naukowych zajmujących się w Polsce badaniami naukowymi oraz pracami aplikacyjnymi związanymi z automatyką. W Katedrze zatrudnionych jest obecnie ponad stu pracowników, w tym 21 badaczy legitymujących się tytułem naukowym profesora lub stopniem naukowym doktora habilitowanego, więc jest to jednostka mająca spory potencjał naukowy i proporcjonalne do tego osiągnięcia.
EN
The prospects of Polish petrochemistry in comparison to the world situation have been described. Special emphasis was put on regional conditions. Some suggestions of Polish petrochemistry improvement have been proposed.
EN
The prospects of Polish petrochemistry in comparison to the world situation have been described. Special emphasis was put on regionla conditions. Some suggestions of Polish petrochemistry improvement have been proposed.
EN
The prospects of Polish petrochemistry in comparison to the world situation have been described. Special emphasis was put on regional conditions. Some suggestions of Polish petrochemistry improvement have been proposed.
EN
Processing and technological innovations introduced in refinery and petrochemical industry have been described. It has been presented possibilities of integration of oxygen-vapour gasification of heavy products obtained in petroleum, coal and natural gas processing, next reprocessing of obtained synthesis gas not only to: methanol, ammonia, "oxo" alcohols, paraffins, terephthalic acid and their derivatives but to electric energy in gas-vapour turbines as well.
first rewind previous Strona / 1 next fast forward last
JavaScript jest wyłączony w Twojej przeglądarce internetowej. Włącz go, a następnie odśwież stronę, aby móc w pełni z niej korzystać.